HETEROAROMATIC POLYMERS - HIGH TEMPERATURE POLYPYRROLONES DERIVED FROM 2,6-BIS(3′,4′-DIAMINOPHENYL)-4-BIPHENYLPYRIDINE AND VARIOUS AROMATIC DIANHYDRIDES

A new type of aromatic tetraamine containing biphenyl moiety in the side chain was synthesized via a modified Chichibabin's reaction. 3-Nitro-4-acetamidoacetophenone was reacted with 4-phenyl benzaldehyde in the presence of ammonium acetate to obtain 2,6-bis(3′,4′-diaminophenyl)-4-biphenyl pyridine (DPPA). A series of polypyrrolones (PPys)were prepared using tetraamine and various aromatic dianhydrides via a two-step cyclization procedure. All the PPys show excellent high temperature stabilities with the initial decomposition temperatures of 530-549℃ and residual weight ratio of 49%-80% at 750℃ in nitrogen. The polymers exhibit no apparent glass transition temperatures (Tgs) except PPy-1(Tg = 327℃), which is derived from tetraamine DPPA and 2,2-bis[4-(3′,4′-dicarboxyphenoxy)-phenyl]propane dianhydride (BPADA). In addition, the polymers have acceptable mechanical properties with the tensile strength of 65-94 MPa. The PPy films show excellent hydrolysis-resistance in alkaline aqueous medium and could maintain most of the properties even after boiling in 10% aqueous sodium hydroxide solution for a week.     

Synthesis of novel poly(thioether‐naphthalimide)s that utilize hydrazine as the diamine

A series of bis(4‐thio‐1,8‐naphthalic anhydride)s and the corresponding bis(N‐amino naphthalimide) derivatives were synthesized from readily available compounds in high yield. A series of novel poly(thioether‐naphthalimide)s, which utilized hydrazine as the diamine, were synthesized by a one‐step polymerization reaction in m‐cresol. Poly(thioether‐naphthalimide)s with inherent viscosities of 0.57–1.73 dL/g were obtained. The polymers were soluble in CHCl₃ and were determined to have high molecular weights by means of gel permeation chromatographic analysis. They were soluble in m‐cresol and could be cast into tough films from m‐cresol solution. The glass‐transition temperature (T_g) values of the polyimides ranged from 320 to 353 °C. Polyimides from the bisphenol dianhydride, derived from 9,9‐bis(4‐hydroxyphenyl)fluorene, did not show a clear transition in the DSC analysis. Degradation temperatures for 5% weight loss all occurred above 430 °C in nitrogen. The series of monomers were successfully copolymerized with each other. Monomers 6a and 7a , containing the bisphenol A moiety, could also be copolymerized with perylenetetracarboxylic dianhydride. These copolymers had high T_g's and were thermally stable. The UV–vis absorption properties of the polymers were also examined. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1040–1050, 2001     

聚萘酰亚胺膜的制备及其气体分离性能

利用萘二酐与邻位含脂肪族取代基的芳香二胺聚合制备了一系列均聚及共聚萘酰亚胺。这些C—N键邻位含取代基的聚萘酰亚胺可溶解于有机溶剂中并具有良好的成膜性。这些膜的拉伸强度在54~77 MPa之间,断裂伸长率在6.4%~8.1%,杨氏模量在1.3~2.2 GPa。这些聚萘酰亚胺具有优异的热稳定性,热分解温度在448~501℃范围内,玻璃化转变温度在382~391℃范围内。气体分离性能测试结果表明,聚萘酰亚胺具有突出的CO_2/CH_4分离能力,CO_2气体透过系数在37.2~151 barrer范围内,而CO_2/CH_4的选择系数在20.9~31.7的范围内,这表明了制备的聚萘酰亚胺气体分离膜材料在天然气纯化方面具有潜在的应用价值。     

An interesting inclusion phenomenon of 2,2′-bis(diphenylhydroxymethyl)binaphthyl with some organic solvents and crystal structure of the host:guest complex with ethyl acetate

Recrystallization of 2,2-bis(diphenylhydroxymethyl)binaphthyl in ethyl acetate, dichloromethane/cyclohexane, dichloromethane/hexane, and chloroform/hexane gave solvent inclusion compounds as colorless prisms which were confirmed by thermal analysis,¹H NMR (CDCl₃) spectral data, and elemental analyses. The crystal structure of 2,2-bis(diphenylhydroxymethyl)-binaphthyl: ethyl acetate was elucidated by X-ray crystallography.     

四硫富瓦烯和联萘基构建的新型多功能氧化还原荧光开关

利用3-溴甲基-2,2'-二甲氧基亚甲氧基-1,1'-联萘和四硫富瓦烯四硫盐反应合成新的联萘基四硫富瓦烯衍生物, 通过电化学氧化还原法发现其荧光能够可逆地增强和减弱, 因此它是一个新的氧化还原荧光开关. 并通过循环伏安法发现这种氧化还原荧光开关可以选择性地识别和跟踪Fe^3＋.     

Facile synthesis of chiral 2-formyl-1,1′-binaphthyl via lipase-catalyzed acylation and hydrolysis of 1,1′-binaphthyl oximes

Lipase-catalyzed acylation of 2-hydroxyiminomethyl-1,1′-binaphthyl [(±)-1] and hydrolysis of 2-acetoxyiminomethyl-1,1′-binaphthyl [(±)-2] yielded optically active oximes 1 and 2 with high enantiomeric excess. Successful synthesis of the optically active aldehyde 4 from chiral O-acetyl oxime 2 occurred without a decrease of enantiomeric excess.     

Synthesis and thermal properties of aryl-substituted rod-like polyimides

This article describes the synthesis and thermal characterization of novel aryl-substituted rod-like homopolyimides. Synthetic aspects of monomer syntheses and one-step polymer synthesis in m-cresol are presented. Polyimides with rod-like chain structure are based on monophenylated pyromellitic dianhydride (MPPMDA), diphenylated pyromellitic dianhydride (DPPMDA), and as rod-like diamine units on phenylated para-phenylene diamine and 1,1′-binaphthyl-4,4′-diamine. As partial flexible units, which have the possibility to be converted into an extended chain conformation, commercially available 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) and 3,4′-oxydianiline (3,4′-ODA) were used. The polyimides were investigated with respect to solution properties and thermal behavior. © 1993 John Wiley & Sons, Inc.     

SYNTHESIS OF CHIRAL BINAPHTHYL CROWN ETHERS AND THEIR USE IN ANIONIC POLYMERIZATION OF METHYL METHACRYLATE AS INITIATOR LIGANDS

INTRODUCTIONAnionic polymerization of MMA could be carried out with alkyllithium or Grignard reagent etc. in a non-polarsolvent. However, this polymerization system often involves multiple active species and side reactions dependingon initiator, countercation, solvent and polymerization temperature etc. Therefore, the molecular weightdistribution and stereomicrostructure of PMMA obtained would be very different[1-4]. These differences wouldbe mainly caused by the nucleophilic attack of…     

苯乙炔封端的BTDA系列酰亚胺预聚体的研究

合成了具有苯侧基的二胺单体1,4-双(4'-氨基苯氧基)-2-(苯基)苯(p-TPEQ), 并与3,3',4,4'-苯酮四羧酸二酐(BTDA)进行缩聚反应, 分别以4-苯乙炔苯酐(PEPA)和4-苯乙炔-1,8-萘二甲酸酐(PENA)作为封端剂, 合成了两个系列的苯乙炔封端的酰亚胺预聚体. DSC测试结果表明, 此类预聚体具有比PETI-5更宽的加工窗口; 利用所合成的预聚体制成了具有较高热分解温度热固性交联PI薄膜. 结果表明, PI预聚体加工性能良好, 其交联后具有优异的力学和热学性能; 同时PEPA封端的预聚体树脂具有比PENA封端的树脂更为优异的综合性能.     

High-performance liquid chromatographic separation of enantiomers of 1,1′-binaphthyl-substituted α-aminoisobutyric acid

The direct and indirect stereochemical resolution of the enantiomers of free and N-protected (R,S)-2′,1′:1,2;1″,2″:3,4-dinaphthcyclohepta-1,3-diene-6-amino-6-carboxylic acid (Bin) was achieved by high-performance liquid chromatographic methods. The direct separation was carried out on a β-cyclodextrin-based chiral stationary phase, ChiraDex, and the indirect resolution by applying pre-column derivatization with 2,3,4,6-tetra-O-acetyl-β-

Full-size image

-glucopyranosyl isothiocyanate.