Sol-Gel Synthesis of Humidity-Sensitive P2O5-SiO2 Amorphous Films

The sol-gel synthesis of silicophosphate gels using phosphoryl chloride and tetraethoxysilane as molecular precursors is reported and discussed. Gel-derived glasses and films having the molar compositions 10P₂O₅ · 90SiO₂ and 30P₂O₅ · 70SiO₂ have been obtained. The structure of the dried gels as well as the structural modifications that occurs during the transformations in gel-derived glasses are analyzed by Fourier transform infrared spectroscopy (FTIR). It has been found that the evidence of the P—O—Si linkages begins to appear only on the FTIR spectra of the bulk gels heat treated up to 400°C while they are well resolved on the FTIR spectra of the bulk gel samples heated up to 1000°C indicating that at this temperature the transformation in the corresponding gel-derived glasses occurs. The humidity sensitive properties of the gel-films have been evaluated by electrochemical impedance spectroscopy (EIS). The phosphorous content as well as the temperature of the heat treatments strongly affect the sensitivity to RH of the gel-derived films.     

The Studies of the Heterogeneous Properties of Solid Surfaces by Means of the Derivatograph Q-1500 D

A simple method has been adopted to obtain an important information on the heterogeneous properties of materials studied, adsorbed liquid films and liquid-solid interactions. The method utilizes Q-TG mass loss and the first derivative Q-DTG mass loss curves with respect to temperature and time obtained during programmed liquid thermodesorption in quasi-isothermal conditions. The values of the adsorption capacity, total porosity of material, the value of active centers, desorption energy distribution and mesopore-size distribution functions obtained by this method are in good agreement with those estimated on the basis of independent methods. The theoretical and experimental results provided novel and unique data on the heterogeneity of solid surfaces, properties of liquid adsorbed films and thermal stability of the liquid/solid interfaces. This paper presents the more important results obtained so far in the studies the liquid/solid systems by means of the Paulik's classical and quasi-isothermal techniques. This revised version was published online in July 2006 with corrections to the Cover Date.     

ZnSe薄膜的化学反应辅助热壁外延法生长及特性研究

本文通过将新型化学气相反应促进剂Zn(NH4)3Cl5引入到热壁外延系统中,以二元素单质Zn和Se为原料,直接在Si(111)衬底上生长了高质量的ZnSe晶体薄膜,薄膜成分接近理想化学计量比。研究了主要工艺参数对薄膜生长形貌和性能的影响。采用SEM、AFM、EDS和PL谱技术研究了生长的ZnSe薄膜的形貌、成分和发光特性。研究结果表明,热壁温度和生长时间是影响ZnSe薄膜形貌的主要因素;气相反应促进剂在薄膜生长和调节成分方面扮演了关键角色,Zn(NH4)3Cl5的存在使得Zn(g)和Se2(g)合成ZnSe晶体的反应转变为气固非一致反应,从而更容易获得近乎理想化学计量比的ZnSe薄膜。ZnSe薄膜在氦镉激光激发下,室温下PL谱由近带边发射和(VZn-ClSe)组合的SA发光组成,而在飞秒激光激发下,仅在481nm处显示出强烈的双光子发射峰。     

Cu3N薄膜及其研究现状

Cu3N薄膜是近10年来研究的热点材料之一.Cu3N是立方反ReO3结构,理想立方反ReO3结构的一个晶胞中Cu原子占据立方边的中心位置而N原子占据立方晶胞的八个顶点,此结构的体心位置有一较大间隙,Cu原子以及其他原子如Pd、碱金属原子等很有可能进入此位置导致Cu3N的电学性能、光学性能等发生很大的变化,这使得该材料具有很大的潜在应用价值.Cu3N的晶格常数为0.3815nm,密度5.84g/cm3,分子量204.63,颜色呈黑绿色或红褐色,空间点群Pm3m.Cu3N薄膜在室温下相当稳定并且热分解温度较低(300℃左右),热分解前后薄膜的光学反射率有较大差别,这可使Cu3N薄膜用作一次性光记录材料.此外,Cu3N薄膜还可用作在Si片上沉积金属Cu线的缓冲层、低磁阻隧道结的阻挡层、自组装材料的模板等.     

用化学溶液方法在Ni-5at%W基底上制备La2Zr2O7过渡层的研究

La2Zr2O7(LZO)过渡层以其独特的物理化学性质越来越受到人们的关注。本文以乙酰丙酮镧和乙酰丙酮锆为前驱盐,丙酸为溶剂配置前驱液,用化学溶液方法(CSD)在具有立方织构的Ni-5at%W基底上制备了LZO过渡层薄膜。研究了前驱液成分、性质以及退火温度对LZO成相以及取向的影响。用常规XRD和X射线四环衍射仪分析了LZO薄膜的相成分和织构。结果显示,在1050℃下退火可以获得强立方织构的LZO薄膜,其中(222)峰的Phi扫描半高宽值为8.95°;(400)峰的Chi扫描半高宽值为6.8°。用高分辨扫描电子显微镜(FE-SEM)观察到LZO薄膜表面均匀致密,没有裂纹和空洞。     

Effect of biaxial strain and hydrostatic pressure on the magnetic properties of bilayer CrI3

Two-dimensional van der Waals magnetic materials are intriguing for applications in the future spintronics devices, so it is crucial to explore strategy to control the magnetic properties. Here, we carried out first-principles calculations and Monte Carlo simulations to investigate the effect of biaxial strain and hydrostatic pressure on the magnetic properties of the bilayer CrI₃. We found that the magnetic anisotropy, intralayer and interlayer exchange interactions, and Curie temperature can be tuned by biaxial strain and hydrostatic pressure. Large compressive biaxial strain may induce a ferromagneticto-antiferromagnetic transition of both CrI₃ layers. The hydrostatic pressure could enhance the intralayer exchange interaction significantly and hence largely boost the Curie temperature. The effect of the biaxial strain and hydrostatic pressure revealed in the bilayer CrI₃ may be generalized to other two-dimensional magnetic materials.     

连续激光辐照ZnSe/MgF2/K9滤光片的透射特性研究

分析了连续激光辐照ZnSe/MgF2/K9滤光片引起透射特性的变化。在室温条件下,用波长0.632 8μm激光作为探测光束,测量了1.06μm连续激光辐照ZnSe/MgF2/K9滤光片温升引起薄膜折射率的改变,导致探测光束通过干涉滤光片后透过率的热致非线性变化。在光斑直径0.75mm条件下,测量了不同功率激光辐照ZnSe/MgF2/K9滤光片引起温升随时间的变化。在激光功率30W,辐照时间2.52s条件下,实验观测到ZnSe/MgF2/K9滤光片薄膜破坏温度约为90℃,辐照时间10s时干涉滤光片形成的薄膜龟裂形貌。     

高反射膜激光零几率损伤阈值的实验研究

在确定光学薄膜激光损伤阈值的实验数据处理过程中,发现一些样品的数据点分布偏离直线型式。对此,用国际标准规定的零几率来确定损伤阈值的同时,对测试数据点采用了不同的非直线拟合,也得到一个零几率损伤阈值。比较两者差异,并与实验测试结果对照,发现这些样品采用非直线拟合得出的零几率损伤阈值与实际情况更接近一些。     

热处理条件对PVA薄膜阻氢性能的影响

采用XRD测定了PVA薄膜在不同热处理条件下的结晶度,并用自行设计的渗氢系数测量系统研究了在不同热处理条件下的PVA薄膜阻氢性能的变化规律。结果表明,PVA薄膜的热处理温度越高,其结晶度越高,越有利于提高PVA薄膜的阻氢性能,但热处理温度宜选择在180℃以下,以防止PVA薄膜热降解,另一方面,在PVA的玻璃化转变温度以下进行热处理同样能够提高PVA薄膜的阻氢性能,而醇解度较低的PVA薄膜在玻璃化转变温度以下经热处理后的阻氢性能提高的幅度较大。     

电子束、离子辅助和离子束溅射三种工艺对光学薄膜性能的影响

运用电子束、离子辅助和离子束溅射三种镀膜工艺分别制备光学薄膜,包括单层氧化物薄膜和增透膜,然后采取一系列测试手段,如Zygo轮廓仪、原子力显微镜、表面热透镜技术和X射线衍射等技术,来分析和研究不同的工艺对这些薄膜性能的不同影响,以判断合理的沉积工艺。