The construction and evaluation of a high pressure manifold and vessels for a Calvet type microcalorimeter

A Setaram C-80 calorimeter has been modified in order to measure the heat flow of energetic materials at pressures up to 69 MPa. A manifold and sample cells capable of operating at high pressure were designed, constructed and evaluated. This paper will describe, in detail, the high pressure manifold construction, safety assessment and calibration. As well, the results for initial trials with ammonium nitrate (AN), and pentaerythritol tetranitrate (PETN) at various pressures and heating rates will be discussed.     

富锂掺杂Li1.06Co0.05Cr0.1Mn1.85O4的合成及电化学性能研究

锂离子电池具有比能量高、功率大、使用寿命长、无记忆效应、性能价格比高等优点,从而成为可充式电源的主要选择对象.锰由于资源丰富、价廉、环境友好等优点,使锰酸锂(LiMn2O4)成为最有希望取代钴酸锂的正极材料.但锰酸锂的放电容量相对较低,结构欠稳定,容量衰减严重,作为正极材料还无法与钴酸锂相比,近年来做了大量的研究工作以改善它的电化学性能[1～6].最近Youngjoon Shin等研究发现[7]用少量的Li与Ni共同替代LiMn2O4中的Mn得到的LiMn2-2yLiyNiyO4的电化学性能要优于单元素替代的LiMn2-xMxO4(M=Li,Cr,Fe,Co,Ni)的电化学性能.     

Boiling Temperature and Reversed Deliquescence Relative Humidity Measurements for Mineral Assemblages in the NaCl + NaNO3 + KNO3 + Ca(NO3)2 + H2O System

Boiling temperature measurements have been made at ambient pressure for saturated ternary solutions of NaCl + KNO₃ + H₂O, NaNO₃ + KNO₃ + H₂O, and NaCl + Ca(NO₃)₂ + H₂O over the full composition range, along with those of the single salt systems. Boiling temperatures were also measured for the four component NaCl + NaNO₃ + KNO₃ + H₂O and five component NaCl + NaNO₃ + KNO₃ + Ca(NO₃)₂ + H₂O mixtures, where the solute mole fraction of Ca(NO₃)₂, x{Ca(NO₃)₂}, was varied between 0 and 0.25. The maximum boiling temperature found for the NaCl + KNO₃ + H₂O system is ≈134.9 ^∘C; for the NaNO₃ + KNO₃ + H₂O system is ≈165.1 ^∘C at x(NaNO₃) ≈ 0.46 and x(KNO₃) ≈ 0.54; and for the NaCl + Ca(NO₃)₂ + H₂O system is 164.7 ± 0.6 ^∘C at x{NaCl} ≈ 0.25 and x{Ca(NO₃)₂} ≈ 0.75. The NaCl + NaNO₃ + KNO₃ + Ca(NO₃)₂ + H₂O system forms molten salts below their maximum boiling temperatures and the temperatures corresponding to the cessation of boiling (dry-out temperatures) of these liquid mixtures were determined. These dry-out temperatures range from ≈300 ^∘C when x{Ca(NO₃)₂} = 0 to ≥ 400 ^∘C when x{Ca(NO₃)₂} = 0.20 and 0.25. Mutual deliquescence/efflorescence relative humidity (MDRH/MERH) measurements were also made for the NaNO₃ + KNO₃ and NaCl + NaNO₃ + KNO₃ salt mixture from 120 to 180 ^∘C at ambient pressure. The NaNO₃ + KNO₃ salt mixture has a MDRH of 26.4% at 120 ^∘C and 20.0% at 150 ^∘C. This salt mixture also absorbs water at 180 ^∘C, which is higher than expected from the boiling temperature experiments. The NaCl + NaNO₃ + KNO₃ salt mixture was found to have a MDRH of 25.9% at 120 ^∘C and 10.5% at 180 ^∘C. The investigated mixture compositions correspond to some of the major mineral assemblages that are predicted to control brine composition due to the deliquescence of salts formed in dust deposited on waste canisters in the proposed nuclear repository at Yucca Mountain, Nevada.     

Redox polymerization of methyl methacrylate with allyl alcohol 1,2-butoxylate-block-ethoxylate initiated by Ce(IV)/HNO3 redox system

Redox initiated free-radical polymerization of methyl methacrylate (MMA) with allyl alcohol 1,2-butoxylate-block-ethoxylate (AABE) was carried out using cerium(IV) ammonium nitrate/nitric acid (HNO₃) redox system to yield AABE-b-PMMA copolymers. The effects of MMA, AABE, Ce(IV) and HNO₃ concentrations on the polymerization rate and polymer yield were investigated. The effect of temperature on the rate of polymerization and polymer yield was also investigated in the temperature range of 25-70 °C. Copolymers were characterized using GPC, FT-IR, ¹H NMR and viscometry methods.     

Thermal decomposition of sodium nitrite and sodium nitrate pre-adsorbed on TiO2 surfaces

The thermal decomposition of sodium nitrite or nitrate pre-adsorbed upon TiO₂ surfaces has been investigated by employing several techniques as infrared spectroscopy (IR) and temperature programmed desorption in conjunction with mass spectrometry analysis (TPD-MS) to study the features observed during these thermal decompositions. Differential thermal analysis (DTA) in combination with X-ray diffraction analysis (XRD) were used to investigate the possibility of a solid state chemical reaction between the solid products originated from the thermal decomposition of the pre-adsorbed species and the TiO₂. On the basis of our results, various characteristic features of these thermal decomposition reactions will be discussed.This work was supported by JUNTA DE ANDALUCIA (financial support for research groups/1990).     

Etude Experimentale et Modelisation des Equilibres Solide—Liquide du Systeme Binaire H2O—UO2(NO3)2

The binary system H₂O—UO₂(NO₃)₂ was studied by solubility measurements and constant heat flow thermal analysis. Temperature and composition of the eutectic transformation between ice and uranyl nitrate hexahydrate were accurately defined. A new hydrate with 24 molecules of water decomposes at –21°C according to the peritectoid reaction<UO₂(NO₃)₂·24H₂O> <UO₂(NO₃)₂·6H₂O> + 18<H₂O>The quasi-ideal model was applied to the solid—liquid equilibria, using the following reaction hypothesis:((UO ₂ ²⁺ )) + 2((NO ₃ ^– ))+ h((H₂O)) ((UO₂OH⁺aq)) + ((H₃O⁺aq + 2((NO ₃ ^– aq))A complete calculation of the binary system was carried out with a global ionic hydration number h equal to 9 in the aqueous solutions. It allowed to the melting enthalpies of uranyl nitrate hydrates.

This revised version was published online in November 2005 with corrections to the Cover Date.     

Reaction Mechanisms of Strontium Ferrites Synthesis

The reactions between strontium and iron nitrates have been studied in an open atmosphere system using three different molar ratios, 1:1 (I), 1:2 (II) and 2:1 (III) at different temperatures as pointed out from the DTA data. The reaction mechanism was discussed based on the chemical composition characterized by means of thermal analysis, X‐ray diffraction patterns, infrared spectra and magnetic susceptibility. It was found that the reaction products depend on both temperature of reaction and the ratio between reactants. The reaction products were found to be composed of a variety of iron compounds that possess different valences: SrFeO_2.86, SrFeO_2.97, SrFe₂O₄, SrFe₁₂O₁₉, Sr₂Fe₂O₅ and Sr₇Fe₁₀O₂₂ in addition to some accessory reaction products namely α‐Fe₂O₃ and FeO(OH).     

Optimization of ammonium nitrate concentration in single-stage continuous cultures of Aspergillus niger with biomass retention

The effect of ammonium nitrate concentration in the citric acid biosynthesis by Aspergillus niger NC-12 in single-stage continuous cultures with biomass retention was investigated. Experiments were carried out in a BIOMER laboratory fermenter with 5 dm³ working volume. At the initial stage of each cultivation, the substrate in the bioreactor contained 1.5 g NH₄NO₃ dm⁻³. After 120 h onwards, the bioreactor was fed continuously at a constant dilution rate of 0.009 h⁻¹. NH₄NO₃ concentration in the feed was varied from one culture to another, ranging between 0.5 g dm⁻³ and 2.5 g dm⁻³. Promising results were obtained when NH₄NO₃ concentration of 1.5 g dm⁻³ was used. The observed concentration of citric acid (c _P) and yield of citric acid with respect to the introduced sucrose (Y _P/S) were 117.88 g dm⁻³ and 78.59 %, respectively. The efficiency coefficient of citric acid biosynthesis (K _ef) was very high, amounting to 83.38. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Monitoring Of Nitrifying Processes In Ground Water By Ion Chromatography

Abstract

The removal of ammonia from mineral medium containing known concentrations of ammonia (up to 300 mg/L) and from ground water by biological oxidation was studied. Nitrifying bacteria were isolated from ground water containing ammonia.

Ammonium ion was determined by a standard titration technique while nitrite and nitrate ions were determined by ion chromatography (IC Supersep anion column) using 1.5 mM phtalic acid solution containing 5 % acetonitril as eluent.

Depending on its concentration in water biooxidation of ammonia lasted from 48 hours till three weeks.     

A novel cyclization/oxidation strategy for a two-step synthesis of (Z)-aurone

An efficient and facile two-step strategy for the synthesis of (Z)-aurone from arylacetylenes and salicyladehydes, via silver(I) nitrate mediated cyclization/oxidation in the presence of potassium carbonate has been developed. The key feature of our method was delicate cascade reaction, to provide the corresponding (Z)-aurone in high yield and good regio- and stereo selectivity.