Effect of particulate filler on cell size in membranes formed via liquid–liquid thermally induced phase separation

This paper discusses the effects of adding particulate filler to a system undergoing liquid–liquid thermally induced phase separation (L–L TIPS). While much is known about the growth of droplets in L–L TIPS, little is known about the effect particular fillers have on droplet growth and the final cell size in the resulting microporous membranes. In this work, zeolite particles are shown to have a significant effect on the final cell size of these microporous membranes, the extent of which depends on the particle loading and processing conditions used to form the membrane. Two polymer–diluent–zeolite systems are reported: isotactic polypropylene–diphenyl ether and poly(methyl methacrylate)–cyclohexanol, both with zeolite 4A particles.     

Recent progress in separation prediction of counter‐current chromatography

As a liquid‐liquid partition chromatography, counter‐current chromatography has advantages in large sample loading capacity without irreversible adsorption, which has been widely applied in separation and purification fields. The main factors, including partition coefficient, two‐phase solvent systems, apparatus, and operating parameters greatly affect the separation process of counter‐current chromatography. To promote the applications of counter‐current chromatography, it is essential to develop theoretical research to master the principles of counter‐current chromatographic separations so as to achieve predictions before laborious trials. In this article, recent progress about separation prediction methods are reviewed from a point of the steady and unsteady state of the mass transfer process of counter‐current chromatography and its mass transfer characteristics, and then it is divided into three aspects: prediction of partition coefficient, modeling the thermodynamic process of counter‐current chromatography, and modeling the dynamic process of counter‐current chromatography.     

以小孔硅胶为载体的纤维素三醋酸酯手性柱的制备及对映体的分离

合成了纤维素三醋酸酯,并被涂于小孔硅胶上制备成ＨＰＬＣ手性固定相。三种药物、两种富烯和一种哒嗪对映体在柱子上被分离。其中噻马心安使用１．０ｍｏｌ／ＬＮａＣｌＯ４和９５％乙醇为流动相,其它对映体以９５％～９８％乙醇为流动相。自填柱使用４个月后柱效和选择性没有明显降低。     

Enrichment and separation of rebaudioside A from stevia glycosides by a novel adsorbent with pyridyl group

The adsorptive capacity and selectivity of a novel adsorbent with pyridyl group toward stevia glycosides were studied. The effect of polarity and physical structure of the sorbent on the selectivity was investigated in detail. Two separation methods were applied in the enrichment of rebaudioside A(RA). They were selective elution using methanol or ethanol solution as solvent, and dynamic chromatographic separation using pyridyl resin with high selectivity. Results show that the chromatographic separation method can effectively enrich RA from stevia glycoside with high content of stevioside.     

新型L-羟脯氨酸聚合物键合手性固定相的制备及对手性化合物的拆分

以单分散亲水性交联聚甲基丙烯酸环氧丙酯-甲基丙烯酸乙二醇双酯(PGMA/EDMA)树脂为载体,制备新型L-羟脯氨酸聚合物键合高效手性配体交换固定相。该固定相在配体交换分离模式下,以0.2mol/LNaAc和0.1mmol/LCu(Ac)2水溶液(pH5.2)为流动相,柱温为30℃～50℃,对衍生和非衍生的D,L-氨基酸和α-羟基酸等9种手性化合物进行了高效液相色谱拆分。详细考察了流动相pH值、温度、流速和进样量对手性分离的影响,选择了合适的色谱分离条件。结果表明,所拆分的9种手性化合物,有5种手性化合物能得到基线分离,最好的分离因子α=2.32。     

Preparation and characterization of mono-valent ion selective polypyrrole composite ion-exchange membranes

Polypyrrole composite cation- and anion-exchange membranes (CEM and AEM), in which polypyrrole (PPY) coated on one surface of the membrane as a thin layer, were prepared by chemical polymerization of pyrrole in the presence of high oxidant concentration (Na₂S₂O₈). Existence of polypyrrole layer on the both types of ion-exchange membranes were confirmed by recording their coating density, SEM images and conductivity. These membranes were extensively characterized by recording their properties such as water uptake, ion-exchange capacity, contact angle, permselectivity and membrane conductivity as a function of polymerization time such as. It was observed that due to coating of PPY for 2 h, membrane permselectivity of CEM for NaCl (0.907) was reduced to 0.873, while it was increased from 0.747 to 0.889 in the case of AEM. Similar behaviors were also obtained for bi-valent electrolytes. Electrodialysis experiments were also conducted with polypyrrole composite ion-exchange membranes using mixed electrolytic systems. Relative dialytic rates for NaCl with respect to other bi-valent electrolyte were varied in between 5 and 8 (depending on bi-valent electrolyte), which suggested the feasible and efficient separation of mono-valent from bi-valent electrolyte. Slower electro-migration of bi-valent electrolyte (CaCl₂, MgCl₂ and CuCl₂) in comparison to NaCl was explained on the basis of synergetic effect of sieving of bulkier bi-valent cations by tight and rigid polypyrrole layer and the difference in electrostatic and hydrophobic–hydrophilic repulsion force between bi-valent cations and mono-valent cation. It was concluded that these composite membranes are suitable for the efficient separation of same type of charged ions by electro-driven separation techniques.     

Engineering Homochiral Metal–Organic Frameworks by Spatially Separating 1D Chiral Metal–Peptide Ladders: Tuning the Pore Size for Enantioselective Adsorption

The reaction of the chiral dipeptide glycyl‐L(S)‐glutamate with Co^II ions produces chiral ladders that can be used as rigid 1D building units. Spatial separation of these building units with linkers of different lengths allows the engineering of homochiral porous MOFs with enhanced pore sizes, pore volumes, and surface areas. This strategy enables the synthesis of a family of isoreticular MOFs, in which the pore size dictates the enantioselective adsorption of chiral molecules (in terms of their size and enantiomeric excess).     

Chiral silica-based monoliths in chromatography and capillary electrochromatography

Chiral-modified silica-based monoliths have become well-established stationary phases for both high performance liquid chromatography (HPLC) and capillary electrochromatography (CEC). The silica-based monoliths were fabricated either in situ in the capillaries for nano-HPLC and CEC or in a mould for “conventional” HPLC. The present review summarizes the chiral modification of silica monoliths and the recent development in the field of enantioselective separations by nano-HPLC and CEC.     

Profiling of phospholipids in lipoproteins by multiplexed hollow fiber flow field-flow fractionation and nanoflow liquid chromatography–tandem mass spectrometry

This study describes a coupled analytical method to carry out the systematic profiling of phospholipids (PLs) in high-density lipoproteins (HDL) and low-density lipoproteins (LDL) from human blood plasma. HDL and LDL of healthy human plasma samples were separated by size and collected on a semi-preparative scale using multiplexed hollow fiber flow field-flow fractionation (MxHF5). Phospholipid mixtures contained in the resulting HDL and LDL fractions were analyzed by shotgun nanoflow liquid chromatography–tandem mass spectrometry (nLC–ESI-MS–MS). We utilized a dual scan method for the separation and simultaneous characterization of complicated PL mixtures by nLC–ESI-MS–MS, such that phosphatidylcholine (PC) and phosphatidylethanolamine (PE) molecules were detected in positive ion mode in a first LC run. In a second LC run, phosphatidylinositol (PI), phosphatidylglycerol (PG), and phosphatidic acid (PA) were detected in negative ion mode. In this study, a total of 56 PLs from HDL and 52 PLs from LDL particles were characterized by their molecular structures from data dependent collision-induced dissociation (CID) experiments, and their relative abundances were compared.