Oxidative degradation of poly(isophthaloylhydrazine‐1,2‐diyl)s

The condensation polymerization of isophthalodihydrazide and diphenyl isophthalate affords poly(isophthaloylhydrazine‐1,2‐diyl). High‐molecular‐weight poly(5‐tert‐butylisophthaloylhydrazine‐1,2‐diyl) is prepared by the polycondensation of 5‐tert‐butylisophthalodihydrazide and bis(4‐nitrophenyl) 5‐tert‐butylisophthalate in NMP at 100 °C. T_d of the poly(diacylhydrazine) is observed above 300 °C. No T_g is observed below T_d. The high‐molecular‐weight poly(diacylhydrazine) exhibits a film‐forming ability. The poly(diacylhydrazine) decomposes on treatment with an oxidant such as sodium hypochlorite solution to obtain the corresponding carboxylic acid and nitrogen. However, poly(diacylhydrazine) was stable to oxygen and hydrogen peroxide even in the presence of transition metal ions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6255–6262, 2008     

N-(取代苯基)-2-(对氯苯氧乙酰基)氨基脲的合成与表征

以无机碱为催化剂，用不同的Ｎ－（聚代基）三氯乙酰胺与对氯苯氧乙酰肼反应，首次合成了３种新的取代氨基基脲化合物Ｎ－（取代苯基）－２－（对氯苯氧乙酰基）氨基脲，产率７１％以上。     

A Potential Method Using Ge{iPrNC[N(SiMe3)2]NiPr}2, (Et3Si)2Te and Anhydrous Hydrazine for Germanium Tellurides

A germanium(II)‐guanidine derivative of formula Ge{iPrNC[N(SiMe₃)₂]NiPr}₂ ( 1 ) was synthesized and characterized by ¹H NMR, ¹³C NMR, elemental analysis, and X‐ray diffraction method. Thermal property was also studied to identify its thermal stability and volatility. More importantly, compound 1 was synthesized to develop a new method for germanium tellurides, where anhydrous hydrazine was introduced to prompt the activity of germanium(II) guanidines (or derivatives) towards (Et₃Si)₂Te. Solution reaction of compound 1 , (Et₃Si)₂Te, and anhydrous hydrazine was investigated to pre‐identify the feasibility of this combination for ALD process. The EDS data of the black precipitate from this reaction verified the potential of this method to manufacture germanium tellurides.     

Dynamic covalent hydrazine chemistry as a selective extraction and cleanup technique for the quantification of the Fusarium mycotoxin zearalenone in edible oils

A novel, cost-efficient method for the analytical extraction of the Fusarium mycotoxin zearalenone (ZON) from edible oils by dynamic covalent hydrazine chemistry (DCHC) was developed and validated for its application with high performance liquid chromatography-fluorescence detection (HPLC-FLD). ZON is extracted from the edible oil by hydrazone formation on a polymer resin functionalised with hydrazine groups and subsequently released by hydrolysis. Specifity and precision of this approach are superior to liquid partitioning or gel permeation chromatography (GPC). DCHC also extracts zearalanone (ZAN) but not α-/β-zearalenol or -zearalanol. The hydrodynamic properties of ZON, which were estimated using molecular simulation data, indicate that the compound is unaffected by nanofiltration through the resin pores and thus selectively extracted. The method's levels of detection and quantification are 10 and 30 μg/kg, using 0.2 g of sample. Linearity is given in the range of 10–20,000 μg/kg, the average recovery being 89%. Bias and relative standard deviations do not exceed 7%. In a sample survey of 44 commercial edible oils based on various agricultural commodities (maize, olives, nuts, seeds, etc.) ZON was detected in four maize oil samples, the average content in the positive samples being 99 μg/kg. The HPLC-FLD results were confirmed by HPLC–tandem mass spectrometry and compared to those obtained by a liquid partitioning based sample preparation procedure.     

碳化物修饰的有序介孔炭的制备及其催化肼分解性能

 以间苯二酚和甲醛为炭源, F127 (EO₁₀₆PO₇₀EO₁₀₆) 为结构导向剂, 在酸性水/乙醇溶液中引入 (NH₄)₆Mo₇O₂₄•4H₂O 或 (NH₄)₂WO₄ 溶液, 经静置自组装形成凝胶, 再于 N₂ 中焙烧即合成出金属碳化物修饰的有序介孔炭材料. 结果表明, 金属离子的种类和用量对碳化物的分散度和介孔炭的有序度影响很大. 通过控制金属离子的用量可制备出粒径为 3~5 nm 且高度分散在介孔炭骨架中的碳化物粒子. 与分步浸渍法相比, 一步法制备的碳化物具有更高的分散度和催化肼分解活性.     

使用分子量级前躯体制备CuInSe_2及其合金并应应用用于光伏发电(英文)

黄铜矿铜铟硒化合物CuInSe2及其与硫或嫁的合金CuIn(Se,S)2或CuInGa(Se,S)2,即所说的CIGS,已通过20%的实验室规模器件光电转换效率展示了其地面光伏应用的巨大潜力。为了减少初始资金成本,提高材料利用率,科研工作者们已经尝试了许多努力通过非真空制程沉积CIGS。这些制程包括电镀工艺,基于颗粒(浆或纳米颗粒)的制程和基于分子量级前趋体的制程。原则上,分子量级前趋体可以使组分元素达到充分混合,可以最大程度地实现组份在基板不同区域的均一分布。这对于一个复杂的涉及到五个主要元素的化合物系统尤为重要。从这个角度来看,分子前趋体的方法具有大面积均匀沉积铜铟镓硒的巨大潜力。这篇综述将着重讨论使用分子前趋体沉积铜铟镓硒制程的最新发展。     

分子动力学模拟压水反应堆中联氨对水的影响

本文采用分子动力学方法模拟在常温常压下(1 atm,298 K)和在压水堆环境下(155 atm,626 K),水分子数为256,联氨(N₂H₄)分子数为0,25,50,75等不同数目时,水和联氨粒子系统的动力性质和微观结构.同时探讨了联氨分子的引入对水中溶解氧的影响.从模拟结果可知,在常温常压下,当联氨的分子数为0,25,50,75时,粒子系统的均方位移会随联氨分子数的增加而增加;联氨分子数为0与为25,50,75比较时会少一个数量级;压水堆环境下,联氨分子数 关键词： 分子动力学 压水堆 联氨