Robust interface on ENR-50/TiO2 nanohybrid material based sol-gel technique: Insights into synthesis,characterization and applications in optical

In this work, the sol–gel technique was used to prepare a new organic–inorganic hybrid from Epoxidized Natural Rubber (ENR-50) and Titanium dioxide (TiO₂) by blending different content of titania precursors (10, 30, and 50 wt%) with an ENR-50 matrix. A wide range of analyses was conducted to understand the nature of this hybrid and also to evaluate its potential uses in applications required high refractive index such as micro optical and optoelectronic devices. Results indicated that the ring-opening reaction of epoxide groups in ENR-50 increased with the increase of titania content in the hybrid resulting a strong bonding between titania and ENR-50 through TiOC bond, which was observed in FTIR spectrum at 1027–1028 cm⁻¹. It is also observed a slight decrease in the intensity of the amorphous peak along with a new crystalline peak appeared at 2θ = 23 and 27° due to the crystalline nature of titania. The hybrids showed three thermal degradation steps in the range of temperature 76 to 769 °C due to the existence of the Ti moieties with the mixture of polymer chains, which in turn shifted the T_g at 24.3, 26.9 and 28.1 °C for the hybrid at 10, 30, and 50 wt% TiO₂ compared to the T_g of ENR-50 at −18.4 °C respectively. The morphology of the ENR-50 showed clear changes during of the synthesis of ENR-50/TiO₂ hybrids, these changes were proven by SEM, TEM, and AFM analyses. Uv–Vis results showed that the higher wavelength peak at 293 nm has shifted to 296, 298 and 300 nm for the hybrid at 10, 30, and 50 wt% TiO₂ respectively due to the strong interaction between titania precursors and ENR-50 matrix. Furthermore, the hybrids showed good optical transparency in the visible light range.     

2-{[1-(3,4-Dihydroxyphenyl)methylidene]amino}benzoic acid immobilized Amberlite XAD-16 as metal extractant

2-{[1-(3,4-Dihydroxyphenyl)methylidene]amino}benzoic acid (DMABA) was loaded on Amberlite XAD-16 (AXAD-16) via azo linker and the resulting resin AXAD-16-DMABA explored for enrichment of Zn(II), Mn(II), Ni(II), Pb(II), Cd(II), Cu(II), Fe(III) and Co(II). The optimum pH values for extraction are 6.5-7.0, 5.0-6.0, 5.5-7.5, 5.0-6.5, 6.5-8.0, 5.5-7.0, 4.0-5.0 and 6.0-7.0, respectively. The sorption capacity was found between 97 and 515 μmol g⁻¹ and the preconcentration factors from 100 to 450. Tolerance limits for foreign species are reported. The kinetics of sorption is fast as t_1/2 is ≤5 min. The chelating resin can be reused for 50 cycles of sorption-desorption without any significant change (<1.5%) in the sorption capacity. The limit of detection values (blank +3 s) are 1.12, 1.38, 1.76, 0.67, 0.77, 2.52, 5.92 and 1.08 μg L⁻¹ for Zn(II), Mn(II), Ni(II), Pb(II), Cd(II), Cu(II), Fe(III) and Co(II), respectively. The enrichment on AXAD-16-DMABA coupled with monitoring by flame atomic absorption spectrometry (FAAS) is used to determine all the metal ion ions in river and synthetic water samples, Co in vitamin tablets and Zn in milk samples.     

Total synthesis of (+)-cylindricine C

A stereoselective total synthesis of (+)-cylindricine C has been achieved starting with (S)-N-Boc-2-pyrrolidinone. The key elements of this synthesis involve the sequence of reactions including BF₃-mediated addition of the allyl Grignard reagent to the cyclic imine, spirocyclization via enamine formation, and intramolecular Michael addition to form the tricyclic core.     

Reaction of carboxamide with Cu2Oisonitrile complex; formation of a new chelated copper(I) complex

Reaction of carboxamides with Cu₂O in the presence of t-butyl isocyanide gave new chelated copper(I) complexes, which probably are formed by the insertion of t-butyl isocyanide into the coppernitrogen bond of copper(I) amide isonitrile complexes, which were initially produced from the carboxamides and Cu₂Ot-butyl isocyanide complex. The same chelated copper(I) complexes were prepared more readily by the reaction of the corresponding N-trimethylsilyl-carboxamides with Cu₂Ot-butyl isocyanide complex. Reactions of the copper(I) complexes thus obtained with alkylating agents, such as alkyl halides, alkyl tosylates and triethyloxonium tetrafluoroborate, also were described.     

2-Benzoylamino-6,7-dimethoxy-4H-3,1-benzoxazin-4-one: Synthesis and investigation of serine protease inactivation

Summary 2-Benzoylamino-6,7-dimethoxy-4H-3,1-benzoxazin-4-one was prepared by thermal treatment of 2-(3-benzoylthioureido)-4,5-dimethoxybenzoic acid and by benzoylation of 2-amino-6,7-dimethoxy-4H-3,1-benzoxazin-4-one. The inactivation of chymotrypsin and human leukozyte elastase by the title compound and 2-benzoylamino-4H-3,1-benzoxazin-4-one is reported.

---

2-Benzoylamino-6,7-dimethoxy-4H-3,1-benzoxazin-4-on: Synthese und Untersuchung der Inaktivierung von Serin-Proteasen

Zusammenfassung 2-Benzoylamino-6,7-dimethoxy-4H-3,1-benzoxazin-4-on wurde durch thermische Behandlung von 2-(3-Benzoylthioureido)-4,5-dimethoxybenzoesäure und durch Benzoylierung von 2-Amino-6,7-dimethoxy-4H-3,1-benzoxazin-4-on hergestellt. Über die Inaktivierung von Chymotrypsin und humaner Leukozyten-Elastase durch die Titelverbindung und 2-Benzoylamino-4H-3,1-benzoxazin-4-on wird berichtet.

     

N-Heterocyclic Olefins as Electron Donors in Combination with Triarylborane Acceptors: Synthesis,Optical and Electronic Properties of D–π–A Compounds

N-heterocyclic olefins (NHOs), relatives of N-heterocyclic carbenes (NHCs), exhibit high nucleophilicity and soft Lewis basic character. To investigate their π-electron donating ability, NHOs were attached to triarylborane π-acceptors (A) giving donor (D)–π–A compounds 1 – 3 . In addition, an enamine π-donor analogue ( 4 ) was synthesized for comparison. UV–visible absorption studies show a larger red shift for the NHO-containing boranes than for the enamine analogue, a relative of cyclic (alkyl)(amino) carbenes (CAACs). Solvent-dependent emission studies indicate that 1 – 4 have moderate intramolecular charge-transfer (ICT) behavior. Electrochemical investigations reveal that the NHO-containing boranes have extremely low reversible oxidation potentials (e.g., for 3 , =−0.40 V vs. ferrocene/ferrocenium, Fc/Fc⁺, in THF). Time-dependent (TD) DFT calculations show that the HOMOs of 1 – 3 are much more destabilized than that of the enamine-containing 4 , which confirms the stronger donating ability of NHOs.     

An efficient 1,3-dipolar cycloaddition between aromatic selenoaldehydes and nitrile oxides or nitrile imines: an easy access to selenium-containing five-membered heterocyclic ring system

1,3-Dipolar cycloaddition between aromatic selenoaldehydes, generated by thermal retro Diels-Alder reaction of anthracene cycloadducts, and nitrile oxides or nitrile imines proceeded efficiently to give the corresponding [3+2] cycloadducts as a single isomer in good yields, being 1,4,2-oxaselenazoles or 1,3,4-selenadiazoles, respectively.     

Synthesis of Pharmaceutical Intermediates by Toluene Benzylation over Heteropoly Acids on Different Support

Selective formation of pharmaceutical intermediates like diphenylmethane, dimethyl- diphenylmethane, benzyl toluene and benzoic acid by liquid phase, toluene benzylation with benzyl chloride as a benzylating agent, was systematically studied over plane clay (K-10, montmorillonite), plane H-Beta, plane MFI structured titanosilicate (TS-1) and heteropoly acids [HPA, namely dodeca-tungstophosphoric acid [H3PO4.12WO3.xH2O] (TPA), dodeca-molybdo phosphoric acid ammonium salt hydrate [H12Mo12N3O40P aq] (DMAA), sodium tungstate hydrated purified [Na12WO4.2H2O] (STH)] supported on clay, H-beta and TS-1. The 20%TPA/Clay, 30%TPA/H-Beta and 30%TPA/TS-l, were observed to be the best catalyst samples over plane clay, plane H-Beta and plane TS-1. The catalyst samples are compared with respect to benzyl chloride conversion and selectivities for diphenylmethane, dimethyl-diphenylmethane, benzyl toluene and benzoic acid. The reaction follows the pseudo-first order rate power law model. The apparent rate constants are calculated and compared with the reported ones.     

Purification of plasmid DNA vectors by aqueous two-phase extraction and hydrophobic interaction chromatography

The current study explores the possibility of using a polyethyleneglycol(PEG)-ammonium sulphate aqueous two-phase system (ATPS) as an early step in a process for the purification of a model 6.1 kbp plasmid DNA (pDNA) vector. Neutralised alkaline lysates were fed directly to ATPS. Conditions were selected to direct pDNA towards the salt-rich bottom phase, so that this stream could be subsequently processed by hydrophobic interaction chromatography (HIC). Screening of the best conditions for ATPS extraction was performed using three PEG molecular weights (300, 400 and 600) and varying the tie-line length, phase volume ratio and lysate load. For a 20% (w/w) lysate load, the best results were obtained with PEG 600 using the shortest tie-line (38.16%, w/w). By further manipulating the system composition along this tie-line in order to obtain a top/bottom phase volume ratio of 9.3 (35%, w/w PEG 600, 6%, w/w NH4)2 SO4), it was possible to recover 100% of pDNA in the bottom phase with a three-fold increase in concentration. Further increase in the lysate load up to 40% (w/w) with this system resulted in a eight-fold increase in pDNA concentration, but with a yield loss of 15%. The ATPS extraction was integrated with HIC and the overall process compared with a previously defined process that uses sequential precipitations with iso-propanol and ammonium sulphate prior to HIC. Although the final yield is lower in the ATPS-based process the purity grade of the final pDNA product is higher. This shows that it is possible to substitute the time-consuming two-step precipitation procedure by a simple ATPS extraction.     

Isotachophoretic determination of carboxylic acids in biodegradation samples

In the current study a method of isotachophoretic separation of selected carboxylic acids was developed. The method was used for the determination of carboxylated oligo(ethylene glycol)s and their degradation products in biodegradation tests of PEG 250 DA [a mixture of dicarboxylated oligo(ethylene glycol)s]. Two tests were performed in the studies: the Organization for Economic Cooperation and Development (OECD) screening test and the river water die-away test. Both the biodegradation tests proved relatively fast biodegradation of the studied compounds. In the OECD screening test the biodegradation was faster than in the river water die-away test which can be ascribed to a higher concentration of bacteria in the biodegradation liquor. The minimal sample pretreatment and relatively low cost of analysis by the isotachophoretic method used here make it a good alternative to existing methods of carboxylic acids analysis.