A practical synthesis of 2-(N-substituted)-aminobenzimidazoles utilizing CuCl-promoted intramolecular cyclization of N-(2-aminoaryl)thioureas

A practical protocol for synthesis of 2-(N-substituted)-aminobenzimidazoles was developed. N-(2-Aminoaryl)thioureas undergo a CuCl-promoted intramolecular cyclization to give the corresponding 2-(N-substituted amino)benzimidazoles in good to excellent isolated yields.     

加速剂对化学镀镍层组成与结构的影响

加速剂对化学镀镍层组成与结构的影响方景礼，武勇，韩克平，张敏（南京大学应用化学研究所配位化学国家重点实验室南京２１００９３）关键词化学镀镍，Ｎｉ０Ｐ合金，加速剂，硫脲化学镀镍磷合金具有耐蚀性、可焊性、厚度均匀和硬度高等优点，已得到广泛应用。为提高生产...     

Dependence of mechanical and aging properties of chloroprene rubber on silica and ethylene thiourea loadings

The interaction between precipitated silica and chloroprene rubber (CR) was investigated using a nuclear magnetic resonance (NMR) technique. The results reveal that the silanol groups on silica surface could chemically react with CR. Crosslinking of CR is therefore possible in the presence of silica at high temperature. The effects of silica and ethylene thiourea (ETU) loadings on properties of the silica-filled CR were thereafter investigated. With increasing silica loading, the compound viscosity increases considerably due to the dilution effect. As silica could act as a curative for CR, increasing silica loading results in both faster cure rate and increased crosslink density. The optimum tensile strength is found at approximately 30 phr of silica loading. The results also show that silica loading has little effect on most aging properties, except the relative modulus in which it increases rapidly with increasing silica loading due to the post curing effect. Similar to the effect of silica loading, the compound viscosity, cure rate and crosslink density are all increased with increasing ETU loading. The tensile strength is, on the other hand, slightly affected by ETU loading. Exception is found at high loading where the tensile strength drops noticeably. Interestingly, aging resistance of the vulcanizate is found to improve with the addition of ETU. Explanation is given by the hindrance capability of ETU to post curing.     

Effect of Thiourea on the Kinetics of the Hydrogen Evolution Reaction at Iron and the Transport of Hydrogen through a Steel Membrane in Solutions of C<Subscript>2</Subscript>H<Subscript>4</Subscript>(OH)<Subscript>2</Subscript>-H<Subscript>2</Subscript>O-HCl

The effect of thiourea (0.5–10 mM) on the kinetics of the hydrogen evolution reaction (HER) at iron and the hydrogen transport through a steel membrane out of ethylene glycol (containing 2 and 10 wt % H₂O) and aqueous solutions containing HCl (0.1–0.99 M) with a constant ionic strength equal to unity is studied in parallel experiments. The presence of 0.5 mM of thiourea in the solutions raises the overvoltage of hydrogen evolution, while a subsequent increase in its concentration does not effect the HER kinetics. The dependence of the flux of hydrogen diffusion through the membrane on the thiourea content passes through a maximum.     

金在酸性硫脲溶液中的阳极溶解过程

采用循环伏安法、旋转金盘电极和库仑电解等方法研究了金在酸性硫脲(TU)溶液中的阳极溶解过程。提出了金的阳极溶解机构。认为表面的Au(TU)_(ads)~ 的“化学溶解”步骤是过程的控制步骤。由此解释了旋转金盘电极的极化曲线出现电流峰以及金的溶解速度出现极大的原因。     

N-(2-羧基-1,3,4-噻二唑-5-基)-N''-芳酰基硫脲与芳氧乙酰基硫脲的合成与生物活性

为了寻找高活性的杂环农药,用5-氨基-1,3,4-噻二唑-2-羧酸与芳酰基异硫氰酸酯及芳氧乙酰基异硫氰酸酯反应,合成出18种新的芳酰基硫脲与芳氧乙酰基硫脲,采用红外光谱、核磁共振氢谱和元素分析证明了其结构,初步的生物活性测定试验表明,部分目标化合物具有良好的植物生长调节活性,其中2c,2d,3b和3g具有良好的生长素活性.     

Carbon‐based Nanosensors for Salicylate Determination in Pharmaceutical Preparations

Thiourea derivative‐based carbon paste electrode (TUD1‐CPE) was constructed as a potentiometric sensor for the determination of salicylate anion in pharmaceutical formulations, Aspocid® and Aspirin®. The optimized CPE contained 45.5 % graphite, 0.5 % reduced graphene oxide (rGO), 46.0 % nitrophenyl octyl ether (NPOE) plasticizer, 5.0 % TUD1 ionophore, and 3.0 % tridodecylmethyl ammonium chloride as additive. The incorporation of NPOE of high dielectric constant, and rGO in electrode caused better performance of the sensor; Nernstian response of 59.0 mV decade^?1 in the concentration range of 10^?1–10^?5 mole L^?1, a detection limit of 1×10^?5 mole L^?1 in a very short response time of 6 seconds. The prepared sensor showed high selectivity against similar anions (i. e. , benzoate, I^?, SCN^?). Selectivity was confirmed by calculating the formation constant (K_β) using sandwich membrane method, where K_β for TUD1‐salicylate is 10^0.43. Theoretical calculations at DFT‐B3LY/6‐31G** level of theory were performed to find interaction mechanism, Energies of HOMO and LUMO orbitals, non‐linear optical (NLO) properties (the electronic dipole moment (μ), first‐order hyperpolarizability (β), the hyper‐Rayleigh scattering (β_HRS) and the depolarization ratio (DR)), and other global properties; these calculations showed lower values of β and DR, higher value of β_HRS, and the shortest lengths of the four N?H bonds between TUD1 and salicylate which confirm their strong complexation and salicylate‐selectivity. Also, all the studied anion‐TUD1 exhibited relatively high NLO properties, and these results were considered as a preliminary study for investigating new types of NLO bearing materials. The sensors were applied successfully for the determination of salicylate anion in Aspocid® and Aspirin®.     

Steric control over hydrogen bonding in crystalline organic solids: a structural study of N,N'-dialkylthioureas

Hydrogen bonding in crystalline N,N'-dialkylthioureas was examined with the help of single-crystal X-ray diffraction, DFT calculations, and Cambridge Structural Database (CSD) analysis. A CSD survey indicated that unlike the related urea derivatives, which persistently self-assemble into one-dimensional hydrogen-bonded chains, the analogous thioureas can form two different hydrogen-bonding motifs in the solid state: chains, structurally similar with those found in ureas, and dimers, that further associate into hydrogen-bonded layers. The formation of one motif or another can be manipulated by the bulkiness of the organic substituents on the thiourea group, which provides a clear example of steric control over the hydrogen bonding arrangement in crystalline organic solids.     

2-Cyanoacrylates in the conjugate addition of trifluoroacetic acid and nucleophilic reagents

In the presence of trifluoroacetic acid, ethyl 2-cyanoacrylate readily reacts with nucleophilic reagents, such as 2-chloro-1,3,2-benzodioxaphosphole, (EtO)₃P, (EtO)₂PCl, Ph₂PCl, Ph₃P, and thiourea. In these reactions the acid proton enters position 2 of the cyanoacrylate, whereas the nucleophilic component enters position 3, in accordance with the electron density distribution in the acrylate. In the absence of trifluoroacetic acid the above reagents, except 2-chloro-1,3,2-benzodioxaphosphole, cause ethyl 2-cyanoacrylate polymerization. The interaction of ethyl 2-cyanoacrylate with 2-chloro-1,3,2-benzodioxaphosphole and trifluoroacetic acid is the first example of a 2-cyanoacrylate taking part in the acid-initiated electrophilic conjugate addition of a weak nucleophile.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1245–1247, July, 1993.     

L-鼠李糖基(氨基)硫脲类化合物的合成

以L-鼠李糖为起始原料, 制备1-溴-2,3,4-三-O-乙酰基-β-L-吡喃型鼠李糖, 然后在甲苯中与Pb(SCN)₂作用, 得到中间体2,3,4-三-O-乙酰基-α-L-吡喃型鼠李糖基异硫氰酸酯(1). 利用2,3,4-三-O-乙酰基-α-L-吡喃型鼠李糖基异硫氰酸酯易发生亲核加成的性质, 在不同溶剂中, 与取代的苯并噻唑胺(2a～2f)、取代的苯并噻唑肼(2g～2l)、氧化和非氧化的哒嗪酮甲酰肼(2m, 2n)以及取代的嘧啶胺(2o, 2p)反应, 合成了16种新的(氨基)硫脲类化合物3a～3p. 所有化合物的结构均经IR, ¹H NMR, LC-MS和元素分析确证, 并对它们的生物活性做了初步测试.