Dispersion production by semi-continuous radical vinyl acetate emulsion polymerization with silane co-monomer and characterization of final products

Vinyl acetate radical emulsion polymerization in water with GF51 silane co-monomer was performed by semi continuous way. The GF51 impacts on dispersion rheology as well on films and bonding strength properties were determined. It should be stated that even low quantities of GF51 (up to 6% from VAc) determined high viscosity of dispersions. The GF51 modified films have low water absorption and high affinity to glass. Molecular mass and thermal properties of GF51 modified polymers were determined accordingly.     

New chiral liquid crystal monomers and cholesteric polyacrylates: synthesis and characterisation

The synthesis of new chiral monomers (M₁ ?M₃ ) based on menthol and the corresponding polyacrylates (P₁ ?P₃ ) is described. The chemical structures, formula and phase behaviour of the obtained monomers and polymers were characterised with FT-IR, ¹H-NMR, elemental analyses, differential scanning calorimetry (DSC), polarising optical microscopy (POM) and X-ray diffraction (XRD). The effect of the mesogenic core rigidity, spacer length and menthyl steric effect on the phase behaviour of M₁ ?M₃ and P₁ ?P₃ is discussed. The expected mesophase of the compounds based on menthol can be obtained by inserting a flexible spacer between the mesogenic core and the terminal groups. For the chiral monomers and polyacrylates, their corresponding melting temperature (T _m), glass transition temperature (T _g) and clearing temperature (T _i) increased with an increase of the mesogenic core rigidity; while the T _m, T _g and T _i decreased with increasing the spacer length. M₁ and P₁ showed no mesophase, while M₂ and M₃ all revealed a SmC* and cholesteric phases. P₂ and P₃ only showed a cholesteric phase.     

Effect of chiral isosorbide groups on mesomorphic properties of side-chain liquid-crystalline polysiloxanes

Chiral side-chain liquid-crystalline (LC) polysiloxanes containing isosorbide groups were graft copolymerised with poly(methylhydrogeno)siloxane, a chiral LC monomer 6-(4-methoxy-benzoyloxy)-hexahydro-furo[3,2-b]furan-3-yl 4'-(4-undec-10-enoyloxy-benzoyloxy)-biphenyl-4-yl adipate and a nematic LC monomer 4'-(4-methoxy-benzoyloxy)-biphenyl-4-yl 4-(2-undec-10-enoyloxy-ethoxy)-benzoate. The chemical structures and LC properties of the monomers and polymers were characterised by use of various experimental techniques including Fourier transform infrared spectroscopy (FTIR), ¹H-nuclear magnetic resonance (NMR), element analyses (EA), differential scanning calorimetry (DSC), polarised optical microscopy (POM) and X-ray diffraction (XRD). All the chiral LC polymers showed LC properties with very wide mesophase temperature ranges and the chiral component in the LC polymer systems lead to the appearance of a cholesteric phase. The polymers bearing most chiral LC monomer component showed smectic phases by reason of regular structures in the polymer systems. With the increase of another nematic LC monomer in the polymers, the regular polymer structures were destroyed because of different chemical structures between the two kinds of LC monomers, leading to the disappearance of the smectic arrangement.     

The effect of mesogenic and non-mesogenic crosslinking units on the phase behaviour of side-chain smectic and cholesteric elastomers

Chiral monomer (M₁ ), mesogenic and non-mesogenic crosslinking agents (C₁ and C₂ ), and the corresponding liquid crystalline elastomers (P₁ and P₂ series), have been synthesised. Their chemical structures have been characterised by Fourier transform infrared or ¹H nuclear magnetic resonance and their phase behaviour investigated by differential scanning calorimetry, polarising optical miscoscopy, thermo-gravimetric analysis (TGA) and X-ray diffraction. The effect of the crosslinking unit on the phase behaviour of the elastomers has been studied. M₁ showed a cholesteric oily streak and focal conic texture. C₂ exhibited a nematic enantiotropic thread-like and schlieren texture, and a monotropic fan-shaped texture in the S_A phase. Due to the introduction of the mesogenic crosslinking unit, elastomers, P_2-1 ?P_2-5 , exhibited a cholesteric phase, while elastomers, P_1-1 ?P_1-4 , derived from a non-mesogenic crosslinking unit, exhibit a S_A phase. As the content of the crosslinking unit increased, the T _g of the P₁ series initially decreased and then increased, and the T _i of the series decreased. In the P₂ series the T _g increased, but the T _i initially increased and then decreased. TGA confirmed that all the elastomers had improved thermal stability.     

Mesophase behaviour of laterally di-fluoro-substituted four-ring compounds

Four new groups of the di-fluoro-substituted 4-(2′-(or 3′)-fluoro phenylazo)-2-(or 3-) fluoro phenyl-4″-alkoxyphenylazo benzoates (In–IVn) were prepared and investigated for their mesophase behaviour. An alkoxy group of variable chain length (n = 6, 10 and 14 carbons) is attached to the terminal phenylazo benzoate moiety, and two lateral fluoro substituents are attached individually with different orientations to the other two adjacent rings. The molecular structures of the prepared compounds were confirmed by Fourier transform infrared spectroscopy and ¹H NMR spectroscopy. The study aims to investigate the steric effect of the spatial orientation and relative positions of the two lateral fluorine atoms on the mesomorphic properties in their pure states. The mesophase behaviour was investigated via differential scanning calorimetry and mesophases were identified by polarised light microscopy. The investigation shows that these compounds exhibit high enantiotropic mesophases (SmC and N) and broad mesophase temperature range. The type and stability of the mesophase depends on the length of the terminal alkoxy chain and the position the two fluoro substituents. A comparison between these investigated compounds with their corresponding three-ring analogues was discussed.     

The effect of ethanol on the phase behaviour and micro-rheology of liquid crystals

The effect of ethanol on the phase behaviour and micro-rheology of lyotropic liquid crystals (LC) has been studied using a binary mixture of monoglyceride (MG) and aqueous ethanol. The phase behaviour study reveals the structural modulation of surfactant aggregates with increasing ethanol concentration, namely a bicontinuous cubic phase (Ia3d) transitions to the lamellar phase (L_α), at a fixed MG concentration. This behaviour is explained by considering the critical packing parameter (CPP) of the surfactant molecule. Because ethanol dehydrates the surfactant head group (a _s), the CPP values increase (decreasing a _s) and thus the formation of larger CPP aggregates is favoured (i.e., the Ia3d–L_α transition occurs). Cross-polarised images and X-ray scattering data support this conclusion. The structural modulation of the LC has further been investigated using a diffusing wave spectroscopy technique. The correlation and relaxation times, determined from the intersection point at short and long time scales of the mean square displacement (MSD), decrease with increasing concentrations of ethanol, indicating structural modulation of the LC. The micro-viscoelastic moduli (G′ and G′′) derived from the Laplace transformation of the MSD decrease with increasing ethanol concentrations, due to the LC modulation. The thermal effects on the micro-rheology of the LC have also been studied.     

A novel two‐dimensional CdII coordination polymer: poly[aqua[μ4‐2‐(4‐carboxylatobenzoyl)benzoato]cadmium(II)]

The title Cd^II coordination framework, [Cd(C₁₅H₈O₅)(H₂O)]_n or [Cd(bpdc)(H₂O)]_n [H₂bpdc is 2‐(4‐carboxybenzoyl)benzoic acid], has been prepared and characterized using IR spectroscopy, elemental analysis, thermal analysis and single‐crystal X‐ray diffraction. Each Cd^II centre is six‐coordinated by two O atoms from one 2‐(4‐carboxylatobenzoyl)benzoate (bpdc²⁻) ligand in chelating mode, three O‐donor atoms from three other bpdc²⁻ anions and one O atom from a coordinated water molecule in an octahedral coordination environment. Two crystallographically equivalent Cd^II cations are bridged by one O atom of the 2‐carboxylate group of one bpdc²⁻ ligand and by both O atoms of the 4‐carboxylate group of a second bpdc²⁻ ligand to form a binuclear [(Cd)₂(O)(OCO)] secondary building unit. Adjacent secondary building units are interlinked to form a one‐dimensional [Cd(OCO)₂]_n chain. The bpdc²⁻ ligands link these rod‐shaped chains to give rise to a complex two‐dimensional [Cd(bpdc)]_n framework with a 4,4‐connected binodal net topology of point symbol {4³.6².8}. The compound exhibits a strong fluorescence emission and typical ferroelectric behaviour in the solid state at room temperature.     

Impact of Gd3+ and Nd3+ ions substitution on structural and magnetic properties of Co0.5Ni0.5Fe2O4 ferrite system

Co_0.5Ni_0.5(Gd/Nd)_xFe_2-xO₄ (x ?= ?0.0 and 0.06) ferrites were prepared by the solid-state reaction method. These materials were characterized by XRD, FT-IR spectroscopy, and VSM techniques. The XRD analysis revealed the phase formation of all samples and their cubic spinel structure with the Fd-3m space group. Lattice constant was found to increase due to Gd and Nd ions substitution. However, the crystallite size was observed to decrease by the substitution effect. The FT-IR spectra showed the two vibrational frequency bands of the tetrahedral and octahedral sites. From the magnetic properties study, it was identified that the pure and Gd substituted Co_0.5Ni_0.5Fe₂O₄ ferrite showed a ferromagnetic behaviour. While the Nd substituted Co_0.5Ni_0.5Fe₂O₄ ferrite delivered a superparamagnetic behaviour. The substitution of Gd and Nd changed the values of the magnetic parameters of Co_0.5Ni_0.5Fe₂O₄ ferrite. An increase in the saturation magnetization (M_s) value was observed due to substitution of Gd and Nd in Co_0.5Ni_0.5Fe₂O₄ ferrite, indicating that Gd and Nd substitution strengthen the supermagnetic interactions in Co_0.5Ni_0.5Fe₂O₄ ferrite. The highest value of M_s was observed in Gd doped sample.     

Synthesis,Crystal Structure and Characterization of a Ni(Ⅱ) Complex of Constructed 2,6-Bis(benzimidazol-2-yl) pyridine

A fluorescent Ni(II) complex 1, [Ni(OH-H2Bdc)(Bibimp)]n·nH2O, constructed with 5-hydroxyisophthalic acid(OH-H2Bdc) and 2,6-bis(2-benzimidazolyl)pyridine)(Bibimp) has been synthesized by hydrothermal methods and structurally characterized by elemental analysis, IR spectroscopy, TG/DTG, fluorescence spectrum and single-crystal X-ray diffraction. The title complex crystallizes in triclinic system, space group P1 with a = 10.187(2), b = 10.273(2), c = 13.401(3), α = 69.65(3), β = 69.66(3), γ = 70.61(3)o, V = 1196.8(4) 3, and Z = 2. The adjacent chains of complex 1 are stacked offset with respect to each other in an ABAB fashion by van der Waals interactions, and only a weak interlayer nonclassical C–H···O hydrogen bond has been observed. Complex 1 displays strong blue fluorescent emissions at 483 nm in the solid state upon photo-excitation at 365 nm at room temperature.     

Real-time in situ monitoring of manufacturing process and CFRP quality by relative resistance change measurement

In situ monitoring of resin flow, impregnation of carbon fiber fabrics, and curing during composite manufacturing are very important for determining the quality of composite parts. In conventional methods, sensors, such as optical fibers and strain gages, are bonded to or embedded in the composites for measuring the changes in mechanical and chemical properties. Although they can detect resin curing behavior and impregnation of carbon fibers, they may adversely affect the manufacturing process or structural integrity of the composites. In this study, carbon fiber itself was used as a sensor that minimizes the degradation of mechanical properties and increases the efficiency of monitoring the manufacturing process. The change in the electrical resistance of carbon fiber fabrics was monitored during the various manufacturing processes when the resin flowed through the carbon fiber fabric and curing progressed. The effectiveness of this monitoring method was confirmed, and it is expected to be applicable in monitoring the quality of the finished composite parts.