Oxidative Ammonolysis of Birch Wood

The functional composition of oxidative ammonolysis products obtained from treatment of birch wood with ammoniacal ammonium persulfate using a mechanochemical method was studied.     

Microwave-assisted extraction of high-molecular-weight hemicelluloses from spruce wood

Microwave-assisted extraction (MAE) at atmospheric pressure has been demonstrated as an efficient technology for the extraction of polymeric hemicelluloses from spruce sawdust. This technology was shown to be more efficient than conventional extraction. MAE leads to a high solubilization of wood and a selective extraction of hemicellulose polymers with high molecular weights. To optimize MAE, different treatment powers (125–573 W) of presoaked spruce sawdust in water and 1 M sodium hydroxide solution for a period of 60 min were tested. The yield of hemicellulose extraction increased with the microwave power in both mediums, but with a clear advantage for presoaked samples in basic medium. The characterization of extracted hemicelluloses has shown high extraction selectivity depending on the medium of impregnation of sawdust before MAE: High-molecular-mass acetylated galactoglucomannans (M_w ∼ 41 kDa) were isolated after presoaking in water and higher molecular mass arabinoglucoronoxylans (M_w ∼ 66 kDa) in basic medium.     

Urinary levoglucosan as a biomarker for residential wood smoke exposure

As part of a randomised controlled residential intervention study, levoglucosan (LG) was investigated as a biomarker for wood smoke exposure. This study was conducted among 33 children living in homes that used wood stoves for residential heating. Indoor fine particulate matter (PM_2.5) concentrations and corresponding urine samples from participants were collected during pre- and a post-intervention winter sampling periods. Interventions included the installation of an air filtration unit and a wood stove change out. Homes and children assigned to a placebo filter served as the control condition. Results showed a strong reduction in indoor PM_2.5 among the air filter homes (≈58% reduction), whereas the wood stove change out homes did not have a significant PM_2.5 reduction from pre- to post-intervention observations. Children living in the air filter homes did not show a corresponding reduction in urinary LG concentrations. Further analysis did not show an association between overall changes in indoor PM_2.5 concentrations and changes in urinary LG concentrations. These findings suggest that urinary LG is not a reliable indicator of wood smoke exposure in residential wood heating settings.     

Determination of Low-Molecular-Mass Phenolic and Non-Phenolic Lignin Degradation Compounds in Wood Digestion Solutions by Capillary Electrophoresis

 Different capillary electrophoretic techniques were investigated and compared for the separation of low-molecular-mass phenolic and neutral lignin degradation compounds. Simple capillary zone electrophoresis (CZE) was not suited for this problem. Switching to micellar electrokinetic capillary chromatography (MEKC) by adding micelle-forming reagents to the carrier electrolyte enhanced the separation performance considerably. Alternatively, microemulsion electrokinetic chromatography (MEEKC) was investigated. This is a CE technique in which analytes interact with moving oil droplets present in a microemulsion buffer. Using the optimized carrier electrolyte systems and a 60 cm×50 μm I.D. bubble cell capillary it was possible to analyse solutions of different wood digestion procedures and to investigate differences in lignin degradation products during use of different kinds of wood (eucalyptus, beech, scotch pine and acacia). Received August 25, 1999. Revision April 13, 2000     

Wooden-based materials: Eco-friendly materials for direct mass spectrometric analysis and microextraction

Lignocellulosic materials have arisen as a sustainable alternative in microextraction techniques during the last 10 years. As they are natural materials, their use fits into some of the principles of Green Analytical Chemistry. Their inherent porosity, narrow shape, and rigidity permit their use in ambient ionization mass spectrometry techniques. In particular, the combination of wooden-based materials and direct analysis gives birth to the so-called wooden-tip electrospray ionization mass spectrometry technique. This approach has been used for the direct analysis of complex samples, and as a streamlined tool for fingerprint quality analysis. Also, wooden-based materials can be superficially modified to boost the interaction with target compounds, allowing their isolation from complex samples. This review describes the potential and applicability of direct analysis using lignocellulosic materials, as well as other alternatives related to their use in microextraction.     

Characteristics and Bond Performance of Wood Adhesive Made from Natural Rubber Latex and Alkaline Pretreatment Lignin

The aim of this study was to characterize an aqueous polymer isocyanate (API) type adhesive made from natural rubber latex (NRL) and lignin as base polymers, and to evaluate bond performance of the adhesive as laminated wood adhesive. The base polymers of the adhesive were prepared by blending NRL, polyvinyl alcohol (PVA), and lignin isolated from black liquor of alkaline pretreatment of oil palm empty fruit bunch (OPEFB) and sugarcane bagasse (SB) with compositions of 25/25/0, 25/20/5, 25/15/10, 25/10/15, 25/5/20, and 25/0/25 (w/w/w). The isocyanate crosslinker was added at the level of 15% of the weight of base polymer. The glass transition temperature (Tg), heat degradation, and the homogenity of the adhesive blend were analyzed. The adhesive was used for producing laminated wood (20×8 cm²). Results showed that the addition of lignin in the base polymer blends of API adhesive did not significantly affect the Tg of the adhesives. However, it affected the thermal decomposition and bond performance of the adhesives. There were more residues and less homogenous adhesive solution due to the addition of lignin in the base polyemr blends of API adhesives. The addition of lignin in the base polymer blends caused significant decrease in bond performance of the adhesive applied in glue laminated wood.     

MR Study of Water Distribution in a Beech (Fagus sylvatica) Branch Using Relaxometry Methods

Wood is a widely used material because it is environmentally sustainable, renewable and relatively inexpensive. Due to the hygroscopic nature of wood, its physical and mechanical properties as well as the susceptibility to fungal decay are strongly influenced by its moisture content, constantly changing in the course of everyday use. Therefore, the understanding of the water state (free or bound) and its distribution at different moisture contents is of great importance. In this study, changes of the water state and its distribution in a beech sample while drying from the green (fresh cut) to the absolutely dry state were monitored by 1D and 2D ¹H NMR relaxometry as well as by spatial mapping of the relaxation times T₁ and T₂. The relaxometry results are consistent with the model of homogeneously emptying pores in the bioporous system with connected pores. This was also confirmed by the relaxation time mapping results which revealed the moisture transport in the course of drying from an axially oriented early- and latewood system to radial rays through which it evaporates from the branch. The results of this study confirmed that MRI is an efficient tool to study the pathways of water transport in wood in the course of drying and is capable of determining the state of water and its distribution in wood.     

Optimization of process for the production of bio-oil from eucalyptus wood

The pyrolysis of eucalyptus wood was carried out in a batch reactor to optimize the yield of bio-oil.Effect of various parameters like feed(particle) size,temperature,presence of catalyst and heating rate on the yield of bio-oil was investigated.The optimum conditions for high yield of bio-oil are for the particle size 2 mm~5 mm(average l/d=12.84/2.03 mm) at 450 ℃ in high heating rate.The reaction kinetics and the quality of bio-oil produced are independent of the presence of different catalysts like mordenite,kaoline clay,fly ash and silica alumina.The physical properties like odour,colour,PH,viscosity,heating value were determined.The FT-IR analysis of bio-oil indicates the presence of different functional groups such as monomeric alcohol,phenol,ketones,aldehydes,carboxylic acid,amines,and nitro compounds.The composition of the bio-oil at different conditions was analyzed using GC-MS and found that the components are temperature dependent but independent of catalysts used.