Electro-Mechanochemical Atom Transfer Radical Cyclizations using Piezoelectric BaTiO3

The formation and regeneration of active Cu^I species is a fundamental mechanistic step in copper-catalyzed atom transfer radical cyclizations (ATRC). Typically, the presence of the catalytically active Cu^I species in the reaction mixture is secured by using high Cu^I catalyst loadings or the addition of complementary reducing agents. In this study it is demonstrated how the piezoelectric properties of barium titanate (BaTiO₃) can be harnessed by mechanical ball milling to induce electrical polarization in the strained piezomaterial. This strategy enables the conversion of mechanical energy into electrical energy, leading to the reduction of a Cu^II precatalyst into the active Cu^I species in copper-catalyzed mechanochemical solvent-free ATRC reactions.     

行和列和为常量的(0,1)-矩阵的计数

Let fs,t(m,n) be the number of (0,1) - matrices of size m x n such that each row has exactly s ones and each column has exactly t ones (sm = nt). How to determine fs,t(m,n)? As R. P. Stanley has observed (Enumerative CombinatoricsⅠ(1997), Example 1.1.3), the determination of fs,t(m, n) is an unsolved problem, except for very small s, t. In this paper the closed formulas for f2,2(n,n), f3,2(m,n), f4,2(m,n) are given. And recursion formulas and generating functions are discussed.     

Mechanochemistry in Portugal—A Step towards Sustainable Chemical Synthesis

In Portugal, publications with mechanochemical methods date back to 2009, with the report on mechanochemical strategies for the synthesis of metallopharmaceuticals. Since then, mechanochemical applications have grown in Portugal, spanning several fields, mainly crystal engineering and supramolecular chemistry, catalysis, and organic and inorganic chemistry. The area with the most increased development is the synthesis of multicomponent crystal forms, with several groups synthesizing solvates, salts, and cocrystals in which the main objective was to improve physical properties of the active pharmaceutical ingredients. Recently, non-crystalline materials, such as ionic liquids and amorphous solid dispersions, have also been studied using mechanochemical methods. An area that is in expansion is the use of mechanochemical synthesis of bioinspired metal-organic frameworks with an emphasis in antibiotic coordination frameworks. The use of mechanochemistry for catalysis and organic and inorganic synthesis has also grown due to the synthetic advantages, ease of synthesis, scalability, sustainability, and, in the majority of cases, the superior properties of the synthesized materials. It can be easily concluded that mechanochemistry is expanding in Portugal in diverse research areas.     

电感耦合等离子体发射光谱法测定记号笔笔芯和墨水中铜和铬

报道了使用ICP-AES测定记号笔芯和墨水中的铜和铬的方法。 主要关注了不同的样品前处理方法的研究。 结果表明: 对标记用的油性记号笔笔芯和含有高分子树脂的墨水, 采用550 ℃灰化, 混合酸(V_HNO3∶V_HClO4=3∶1)溶解的方法处理样品, 是该类样品比较好的处理方法; 而对不含有高分子树脂的墨水, 采用直接用混合酸(V_HNO3∶V_HClO4=3∶1)的消解即可。 消解后的样品经稀酸酸化后, 采用ICP-AES测定铜和铬, 结果准确、稳定。该方法适合记号笔或墨水中元素的测定。     

基于拉曼光谱鉴定黑色签字笔笔迹的种类与书写时间

黑色签字笔字迹种类与书写时间的鉴定一直是国内外法庭科学研究领域的热点问题。基于拉曼光谱法的分辨率高、稳定性好、效率高以及无损检测等优点,对收集的16种品牌或牌号的黑色签字笔字迹样本进行测试。完成同一品牌或牌号同一时间在不同存储条件(暗室和光照)与不同纸张本底(复印纸和笔记本)字迹样本的制备。将样本字迹剪裁,双面胶固定在载玻片上,放入储存箱内避光保存,间隔一段时间对样品进行测试,测试工作共持续1年,形成图谱数据库。在考察实验条件如测量点、激光功率及共焦类型等因素影响的基础上,筛选出最佳条件。在此条件基础上,检测黑色签字笔在不同书写时间、储存环境、纸张本底等条件下的字迹样本。实验结果表明:(1)存储条件(暗室和光照)、纸张本底(复印纸和笔记本)等不同条件下,同种黑色签字笔字迹的拉曼位移相同,重复性好,受水和纸张等本底的干扰较小。(2)根据拉曼位移的差异可将16种黑色签字笔分成5类。(3)以2#样本为例, 1 140 cm^-1处拉曼光谱特征峰,归属为酯类化合物的C-O伸缩振动ν(CO)。酯类化合物的含量随着时间延长而不断减少,因此随着书写时间越久远,特征峰的相对强度越大(8→1)。通过拟合后计算出相对面积数值I,样本书写时间越早,I值越大,反之I值越小。研究结果可用于快速、准确、无损判定黑色签字笔字迹的种类和推断其相对书写时间。     

Green Strategies for the Preparation of Enantiomeric 5–8-Membered Carbocyclic β-Amino Acid Derivatives through CALB-Catalyzed Hydrolysis

Candida antarctica lipase B-catalyzed hydrolysis of carbocyclic 5–8-membered cis β-amino esters was carried out in green organic media, under solvent-free and ball-milling conditions. In accordance with the high enantioselectivity factor (E > 200) observed in organic media, the preparative-scale resolutions of β-amino esters were performed in tBuOMe at 65 °C. The unreacted β-amino ester enantiomers (1R,2S) and product β-amino acid enantiomers (1S,2R) were obtained with modest to excellent enantiomeric excess (ee) values (ee_s > 62% and ee_p > 96%) and in good chemical yields (>25%) in one or two steps. The enantiomers were easily separated by organic solvent/H₂O extraction.     

高压变质二氧化硅矿物的合成及表征

根据高能机械球磨与地球板块碰撞之间具有的碰撞局域性和剪切应力相似的特点, 采用高能机械球磨和静高温高压技术, 以α-石英与石墨混合粉末为原料, 提出了人工合成地表柯石英的一种新方法. 利用高能机械球磨制备了α-石英和石墨纳米非晶混合粉末, 其高温高压合成柯石英的最低条件是970 K和3.7 GPa. 合成的柯石英有10个Raman峰, 分别位于120, 152, 179, 206, 270, 329, 357, 428, 467和521 cm-1, 是目前最全的柯石英Raman谱.     

高效毛细管电泳法分析蓝色签字笔字迹色痕种类及相对形成时间

选用毛细管区带电泳分离模式,对13种市售蓝色签字笔样品字迹色痕进行了分析。当电压为15 kV、柱温为25 ℃时,以0.03 mol/L 四硼酸钠水溶液(外加10%(体积分数)的甲醇)为缓冲液,所有样品都可以得到良好的区分;依据紫外区检测结果,样品可以分为三大类、五小类;依据可见区检测结果,样品可以分为四类;两种分析结果相结合有助于增大不同样品之间的区分度;选择3种样品进行暗处保存老化制样,根据字迹中色料成分相对含量的变化,对字迹的相对形成时间进行了初步探讨。研究还发现纸张类型对于上述研究结果无影响。     

球磨法制备异质结型光催化剂ZnO/Bi_4Ti_3O_(12)及催化性能

本文用水作为分散介质,掺杂一定量的ZnO于Bi_4Ti_3O_(12)中,采用高能球磨法制备了异质结型光催化剂ZnO/Bi_4Ti_3O_(12).利用UV-Vis、XRD、SEM和PL等仪器对样品进行了分析与表征.以375 W中压汞灯为光源,通过对亚甲基蓝的氧化来研究其光催化活性.结果表明,对于光氧化亚甲基蓝(MB),异质结型光催化剂ZnO/Bi_4Ti_3O_(12)光催化活性高于钛酸铋的光催化活性.当ZnO的掺杂量分别是0.0和0.5wt.%,异质结型光催化剂ZnO/Bi_4Ti_3O_(12)对亚甲基蓝光氧化率分别达到50.2和80.3 %.     

磁性离子液体中聚乙撑二氧噻吩/多壁碳纳米管纳米复合材料的球磨法制备及表征

以磁性离子液体1-丁基-3-甲基咪唑四氯化铁盐([bmim]FeCl₄)为介质, 将多壁碳纳米管(MWCNTs)机械球磨分散在其中形成[bmim]FeCl₄/MWCNTs凝胶后, 加入乙撑二氧噻吩(EDOT)单体, 利用阴离子 的氧化性进行原位聚合, 球磨法制备了均匀包覆不同含量MWCNTs的聚乙撑二氧噻吩/多壁碳纳米管(PEDOT/MWCNTs)纳米复合材料. 并以傅里叶红外光谱(FT-IR)、扫描电镜(SEM)和透射电镜(TEM)对PEDOT/MWCNTs的结构与形貌进行了表征|在0.5 mol/L硫酸溶液中, 用循环伏安测试(CV)研究了PEDOT/MWCNTs的电化学行为|采用四探针仪测定了PEDOT/MWCNTs的电导率|热重分析(TGA)研究了PEDOT/MWCNTs的热稳定性. 结果表明, PEDOT 纳米颗粒均匀包覆于MWCNTs表面, 形成了核壳结构|PEDOT与MWCNTs之间的共轭作用随着MWCNTs含量的增加而增强. MWCNTs的质量分数为30%的PEDOT/MWCNTs的电导率出现峰值, 达到7.46 S/cm, 且电化学活性最好. MWCNTs的质量分数为10%时, PEDOT/MWCNTs的热稳定性相对于PEDOT显著提高.