Solvent Influence on Absorption Spectra and Tautomeric Equilibria of Symmetric Azomethine-Functionalized Derivatives: Structural Elucidation and Computational Studies

A new series of azomethine-functionalized compounds was synthesized from the condensation of 2-hydroxy-1,3-propanediamine and 2-thienylcarboxaldehydes in the presence of a drying agent. The derivatives were spectroscopically characterized by NMR, LC-MS, UV/Vis, IR and elemental analysis. Variable temperature ¹H-NMR (−60 to +60 °C) was performed to investigate the effect of solvent polarity; the capability of solvent to form H-bond was found to dramatically influencing the tautomerization process of the desired structures. The calculated thermochemical parameters (ΔH₂₉₈, ΔG₂₉₈ and ΔS₂₉₈) at DFT and MP2 levels of theory explained that 3 b exists in equilibrium with two tautomers. The basis of the electronic absorptions was pursued through Time-Dependent Density-Functional Theory (TD-DFT). Analysis of the structural surfaces was inspected and the molecular electrostatic potential (MEP) demonstrated that the three functionalized compounds were relatively analogous in the electronic distributions. Furthermore, the electrophilic and nucleophilic centers lying on the molecular surfaces were probably playing a key-role in stabilizing the compounds through the nonclassical C−H⋅⋅⋅π interactions and hydrogen bonding. The impact of solvent polarity on absorption spectra were investigated via solvatochromic shifts. For instance, compound 3 c displayed a gradual shift of the maximum absorption to the red area when the solvent polarity was increased, recording a 21 nm of bathochromic shift. In contrast, no significant solvent-effect on 3 a and 3 b was observed. The solvation relation was pursued between Gutmann's donicity numbers the experimental λ_max; exhibited almost positive linear performance with a minor oscillation, that ascribe to the possible weak interface between the molecules of solute and designated solvents. The bandgap energy of all products were assessed experimentally using optical absorption spectra following Tauc approach, giving −4.050 ( 3 a ), −3.900 ( 3 b ) and −3.210 ( 3 c ) eV. However, the ΔE were computationally figured out from TD-DFT simulation to be −4.258 ( 3 a ), −4.022 ( 3 b ) and −3.390 ( 3 c ) eV.     

Silver(I)‐Catalyzed Enantioselective [3+2]‐Cycloaddition Reaction of α‐Silylimines: A Facile Route to Quaternary‐Carbon‐Rich Scaffolds

A silver‐catalyzed highly enantioselective 1,3‐dipolar cycloaddition reaction of α‐silylimines with pyrone‐based trisubstituted olefins was developed affording bi‐ and tricyclic α‐quaternary‐carbon‐rich pyrano‐pyrrolidines in excellent yields. The tricyclic benzopyrone adducts thus obtained were efficiently transformed into highly complex tetracyclic scaffolds supporting four consecutive stereogenic centers with three quaternary carbons.     

季铵盐型离子液体中全氟烷基磺酰亚胺盐催化的芳烃硝化反应

全氟烷基磺酰亚胺盐与季铵型离子液体（Cu(N(C4F9SO2)2)2/[N4446][NTf2] 或 In(NTf2)3/[N4446][NTf2]）组成的新催化体系,可以很好的催化芳香族化合物的硝化反应。以氯苯的硝化为例,用硝酸和醋酸酐混合物为硝化试剂,在2mol%的Cu(N(C4F9SO2)2)2或In(NTf2)3催化剂催化下,室温下反应10分钟,氯苯的转化率就可分别达到87.6% 和 90.6%,反应产物的邻/对位比为4.3和4.8。并且这种催化剂与离子液体组成的催化体系很容易被回收,并可以连续使用5次以上。     

Thermally stable and organosoluble binaphthylene‐based poly(urea‐ether‐imide)s: one‐pot preparation and characterization

A new family of wholly aromatic poly(urea‐ether‐imide)s ( 4a–4f ) possessing binaphthylene‐twisted rings was prepared by diphenyl azidophosphate (DPAP)‐activated one‐pot polyaddition reaction of a preformed imide heterocyclic ring‐containing dicarboxylic acid, 2,2′‐bis(4‐trimellitimidophenoxy)‐ 1,1′‐binaphthyl ( 1 ) with various kinds of aromatic diamines ( 3a–3f ). At first, with due attention to structural similarity and to compare the characterization data, a model compound 2 was synthesized by the reaction of diimide‐dicarboxylic acid 1 with two mole equivalents of aniline. In this direct method, the polymers were prepared by polyaddition reactions of the in situ‐formed diisocyanate with the aromatic diamines. Molecular weights of the poly(urea‐ether‐imide)s obtained were evaluated viscometrically, and the inherent viscosities (η_inh) measured were in the range 0.10– 0.25 dl/g. All of the polymers were characterized by FT‐IR spectroscopic method and elemental analysis. All of the resulting polymers exhibited an excellent solubility in common polar solvents such as N‐methyl‐2‐pyrrolidone (NMP), dimethyl sulfoxide (DMSO), N,N‐dimethylformamide (DMF), and N,N‐dimethylacetamide (DMAc). Crystallinity of the resulted polymers was evaluated by wide‐angle X‐ray diffraction (WXRD) method, and they exhibited nearly a non‐crystalline nature as evidenced by their diffractograms. The glass transition temperatures (T_g) of the polymers determined by differential scanning calorimetry (DSC) thermograms were in the range of 274–302°C. The temperatures at 10% weight loss (T_d10%) from their thermogravimetric analysis (TGA/DTG) curves were found to be in the range of 389–414°C in nitrogen atmosphere. Copyright © 2008 John Wiley & Sons, Ltd.     

Microwave‐assisted synthesis and characterization of heterocyclic,and optically active poly(amide‐imide)s incorporating L‐amino acids

N,N′‐Pyromelliticdiimido‐di‐L ‐alanine ( 1 ), N,N′‐pyromelliticdiimido‐di‐L ‐phenylalanine ( 2 ), and N,N′‐pyromelliticdiimido‐di‐L ‐leucine ( 3 ) were prepared from the reaction of pyromellitic dianhydride with corresponding L ‐amino acids in a mixture of glacial acetic acid and pyridine solution (3/2 ratio) under refluxing conditions. The microwave‐assisted polycondensation of the corresponding diimide‐diacyl chloride monomers ( 5–7 ) with 4‐phenyl‐2,6‐bis(4‐aminophenyl) pyridine ( 10 ) or 4‐(p‐methylthiophenyl)‐2,6‐bis(4‐aminophenyl) pyridine ( 12 ) were carried out in a laboratory microwave oven. The resulting poly(amide‐imide)s were obtained in quantitative yields, and they showed admirable inherent viscosities (0.12–0.55 dlg^?1), were soluble in polar aprotic solvents, showed good thermal stability and high optical purity. The synthetic compounds were characterized by IR, MS, ¹H NMR, and ¹³C NMR spectroscopy, elemental analysis, and specific rotation. Copyright © 2008 John Wiley & Sons, Ltd.     

Structure–property co‐relationship of fluorinated poly(imide‐siloxane)s

Eight poly(imide‐siloxane)s co‐polymers have been prepared by one pot solution imidization method. The polymers are synthesized by the reaction of bisphenol‐A‐dianhydride (BPADA) with fluorinated diamine 4,4′‐bis(3″‐trifluoromethyl‐p‐aminobiphenyl ether) biphenyl, and aminopropyl‐terminated polydimethylsiloxane (APPS). The polymers are synthesized by varying the siloxane loading to 5, 10, 15, 20, 25, 30, 35, and 40 wt%, respectively. Thermal, mechanical, rheological, and dielectric properties of these polymers have been evaluated with respect to siloxane loading. The polymers showed glass transition temperature of 107–203°C and tensile strength at break of 24–75 MPa depending on siloxane loading. The elongation break of the polymers ranges from 24 to 144% depending on siloxane loading. The amounts of char residue in the polymers have been correlated with incorporated siloxane in the polymer by NMR techniques. The polymers showed very low water absorption and dielectric constant as low as 2.43 when the siloxane loading is 40 wt%. Copyright © 2008 John Wiley & Sons, Ltd.     

New pyrrolidine and pyrroline derivatives of fullerenes: from the synthesis to the use in light-converting systems

The results of the authors’ studies on the [2+3] cycloaddition of azomethine and nitrile ylides generated from picolylamine and benzylamine derivatives to fullerenes are systematized and new experimental data are considered. Catalysts and microwave radiation promoting the formation of ylides and their addition to fullerenes were successfully used for the first time. A large series of new pyrrolidine and pyrroline derivatives of fullerenes C₆₀ and C₇₀ were synthesized and characterized. The proposed procedures afford the reaction products in yields twice as high (80–85%) as those attained by the classical Prato reaction. The reactions proceed with virtually complete regio- (in the case of C₇₀) and stereoselectivity to afford only cis-2′,5′-disubstituted and trans-1′,2′,5′-trisubstituted pyrrolidinofullerenes. Pyridyl-substituted pyrrolidinofullerenes react with metalloporphyrins and phthalocyanines to form self-ordered coordination complexes. The latter are analogs of natural photosynthetic antenna systems due to photoinduced charge separation that occurs in these complexes upon exposure to light. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 873–898, May, 2008.     

Diastereoselective Synthesis of Pyrazolo[1,2-a][1,2,4]triazine Derivatives via Cross-1,3-dipolar Cyclizations of Azaoxyallyl Cations with N,N′-Cyclic Azomethine Imines

A cross-1,3-dipolar cycloaddition reaction of α-halohydroxamates (in situ generated azaoxyallyl cations) with N,N′-cyclic azomethine imines was developed. The synthetic protocol provided facile and rapid access to pyrazolo[1,2-a][1,2,4]triazine derivatives in good yields and excellent diastereoselectivities under mild metal-free conditions.     

Diastereo‐ and Enantioselective Copper(I)‐Catalyzed Intermolecular [3+2] Cycloaddition of Azomethine Ylides with β‐Trifluoromethyl β,β‐Disubstituted Enones

Reported herein is an asymmetric [3+2] cycloaddition reaction of azomethine ylides with β‐trifluoromethyl β,β‐disubstituted enones, a reaction which is enabled by a Ming‐Phos‐derived copper(I) catalyst (Ming‐Phos=chiral sulfinamide monophosphines, Figure 2 ). This method provides scalable and efficient access to the highly substituted pyrrolidines with a trifluoromethylated, all‐carbon quaternary stereocenter in good yields with up to greater than 20:1 d.r. and 98 % ee. The reaction has a broad substrate scope and tolerates a wide range of functional groups.