含二茂铁基偶氮染料的光稳定性研究

利用UV-Vis吸收光谱仪和光化学反应器研究了含二茂铁基偶氮染料及相应的偶氮染料溶液的光降解动力学.在溶液中,它们的光降解反应遵循零级动力学模型.与相应的偶氮染料相比,含二茂铁基的偶氮染料溶液具有较好的光稳定性.这表明,在其分子内存在着有效的从偶氮染料母体到二茂铁基团的分子内三重态-三重态能量传递,上述过程降低了偶氮染料激发三重态的生成,避免了染料的过早降解,提高了其稳定性.     

Synthesis and characterization of polystyrene‐b‐poly (1,2‐isoprene‐ran‐3,4‐isoprene) block copolymers with azobenzene side groups

Polystyrene‐b‐poly(1,2‐isoprene‐ran‐3,4‐isoprene) block copolymers with azobenzene side groups were synthesized by the esterification of azobenzene acid chloride with polystyrene‐b‐hydroxylated poly(1,2‐isoprene‐ran‐3,4‐isopenre) block copolymers for creating new photochromic materials. The resulting block copolymers with azobenzene side groups were characterized for structural, thermal, and morphological properties. IR and NMR spectroscopies confirmed that the polymers obtained had the expected structures. Differential scanning calorimetric measurements by heating runs clearly showed the glass transitions of polystyrene and polyisoprene main chains and two distinct first‐order transitions at temperatures of azobenzene side groups around 48 and 83 °C. The microstructure of these block copolymer films was investigated using both transmission electron microscopy (TEM) and near‐field optical microscopy (NOM). TEM images revealed typical microphase‐separated morphologies such as sphere, cylinder, and lamellar structures. The domain spacing of microphase‐separated cylindrical morphology in the NOM image agreed with that of the TEM results. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2406–2414, 2002     

Second‐harmonic response of a series of chiral polyesters: A joint experimental and theoretical study

A series of polyesters with π‐conjugated donor–acceptor segments was synthesized by the condensation of azobenzene‐4,4′‐dicarbonylchloride with 1,4:3,6‐dianhydro‐D‐sorbitol ([α] = + 42.5°) and biphenolic chromophores, bis(4‐hydroxyphenylazo)‐2,2′‐dinitrodiphenylmethane and bis(4‐hydroxyphenylazo)‐2,2′‐dinitrodiphenylsulfone. The polymers were characterized by spectral methods (IR, ultraviolet–visible, and NMR), thermal methods (thermogravimetry and differential scanning calorimetry), wide‐angle X‐ray scattering, and polarimetry. The polymers containing isosorbide units were optically active and crystalline. They exhibited glass‐transition temperature values between 100 and 160 °C and were stable up to 400 °C. The second‐harmonic generation (SHG) efficiency of the polymers was experimentally verified by a powder‐reflection technique with 2‐methyl‐4‐nitroaniline as a reference. The SHG efficiencies of the polymers were compared to those of the chromophores and explained as a function of the percentage of chiral composition. The hyperpolarizability β values were also determined by a two‐level model solvatochromic method and computational methods. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2868–2877, 2002     

Spectrophotometric Determination of Nitrite in Water Samples with 4‐(1‐Methyl‐1‐Mesitylcyclobutane‐3‐yl)‐2‐Aminothiazole

Abstract

A simple, sensitive, and specific spectrophotometric method for the measurement of nitrite in water has been developed and optimum reaction conditions along with other analytical parameters have been evaluated. The azo dye, 4‐(1‐methyl‐1‐mesitylcylobutane‐3‐yl)‐2‐(p‐N,N‐dimethylazobenzene)‐1,3‐thiazole was synthesized with the reaction of 4‐(1‐methyl‐1‐mesitylcylobutane‐3‐yl)‐2‐aminothiazole and N,N‐dimethyl aniline in acidic medium. Obtained azo dye has been characterized by infrared (IR), ¹H nuclear magnetic resonance (NMR), and microanalysis methods. The dye shows an absorption maximum at 482 nm. The method is optimized for acid concentration, pH, amount of reagents required, time, and interfering species. All the determinations were carried out at this wavelength throughout the work. At an analytical wavelength of 482 nm, Beer's law is obeyed over the concentration range 0.05 to 2.00 µg nitrite per mL analyte. The molar absorptivity, Sandell's sensitivity, and relative standard deviation are 2.03×10⁴ L mol^?1 cm^?1±251.3 (95%), 2.28×10^?3 µg cm^?2, and 2.74% (n=10), respectively. The detection limit of the method is 0.012 µg ml^?1 of nitrite ion. The method was succesfully applied to the determination of nitrite in tap water and lake water.     

Synthesis and polymerizability of CN monomers

The synthesis and polymerizability of imine C?N monomers is surveyed. The investigated imines were either far more reactive than similarly substituted C?C or C?O monomers, or too stable to polymerize. Imines with electron‐attracting substituents on N favor polymerization by anionic mechanism, but led only to low molecular weight polymers. Imines with a donor substituent on N, such as N‐arylmethyleneimines, polymerized by cationic or anionic mechanism. 1‐ and 2‐Aza‐1,3‐butadienes were also rather unstable and polymerized to oligomers. The symmetrically substituted 2,3‐diaza‐1,3‐butadienes could be purified and polymerized successfully using anionic initiators, resulting in both 1,4‐ and 1,2‐structures in the polymer backbone, depending on the substituents. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis,characterization, photo‐induced alignment,and surface orientation of poly(9,9‐dioctylfluorene‐alt‐azobenzene)s

Three types of bi‐functionalized copolymers ( P1FAz , P2FAz , and P3FAz ) with different numbers of fluorene units and an azobenzene unit were synthesized and characterized using UV–vis and polarized absorption spectroanalysis. The trans‐cis photoisomerization was conformed under 400 nm light irradiation for all copolymers in chloroform. However, in the film state, only the trans‐cis photoisomerization occurred by mono‐fluorene attached copolymer poly[(9,9‐di‐n‐octylfluorenyl‐2,7‐diyl)‐alt‐4,4′‐azobenzene)] ( P1FAz ). Photo‐induced alignment was achieved using the P1FAz film after irradiation with linear polarized 400 nm light and subsequent annealing at 60 °C. Surface orientation of a spin‐coating film of poly(9,9‐didodecylfluorene) ( F12 ) was achieved using the photo‐induced alignment layer of the P1FAz film after annealing at 90 °C. The photo‐induced alignment layer of P1FAz has potential application to the surface orientation technique for appropriate polymers, which will be useful for the fabrication of optoelectronics devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Siloxane polymers containing azo moieties synthesized by click chemistry for photo responsive and liquid crystalline applications

Three new types of siloxane‐based photoactive liquid crystalline polymers containing azo side groups were synthesized through the click chemistry route. The polymers having molecular weight range of 14,000–34,000 g mol^?1 were soluble in most of the polar solvents like chloroform, tetrahydrofuran, dimethylformamide, dimethyl sulfoxide, and dichloromethane. The photoresponsive trans–cis photoisomerization under UV radiation and cis–trans relaxation process in dark for the polymers were studied. The isomerization rate constants were found to be 0.01–0.04 sec^?1 and 1.16*10^?4–4.67*10^?4 sec^?1, respectively. It has been noted that the polymers showed high intensity absorption for n‐π* in chloroform. Both trans and cis forms of azide monomers having azo moiety exhibited molar extinction coefficient ( ? _max) in the range of 22,000–33,000 L mol^?1 cm^?1. The thermotropic behavior of the polymers was studied by polarizing optical microscope (POM) and differential scanning calorimetry (DSC) experiments. Polymer P1 showed liquid crystalline textures of nematic droplets, whereas P2 showed smectic focal conic texture and nematic droplets. Polymer P1 was also studied for photomechanical bending on exposure to UV radiation. The polymers showed initial degradation temperature in the range of 210–275°C. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Electrochemical Behavior of Azo Compounds in Liquid Ammonia

Abstract

At -40°C, the behavior of lO compounds, differing widely in their standard potentials, has been investigated in liquid ammonia, using cyclic voltammetry at a smooth platinum electrode. The purpose of this study was the realization of a redox scale with reversible systems. With azobenzene, pyridazine, cin-noline, benzocinnoline and 4,4′-azobis-(pyridine-N-oxide), the first electron transfer is reversible and leads to the formation of the corresponding radical anions which are stable; the second electron transferleads to the ciianions which can be protonated yielding the corresponding hydrazo. Other compounds, such as azoxybenzene, 3-amino-1,2,4-triazine, pyridine-N-oxide, 8-azaadenine and 1H-tetrazole, have an electrochemical behavior which i s more intricate.     

Pyrazole-based azo-metal(II) complexes as potential bioactive agents: synthesis,characterization, antimicrobial,anti-tuberculosis,and DNA interaction studies

Abstract

In the present investigation, the bioactive azo-dye ligand 1,5-dimethyl-4-[(3-methyl-5-oxo-1-phenyl-4,5-dihydro-1H-pyrazol-4-yl)diazenyl]-2-phenyl-1,2-dihydro-3H-pyrazol-3-one (L) and its transition metal complexes have been synthesized and characterized by various physical and spectroscopic techniques to elucidate their geometrical structures. The molar conductivity measurements confirmed the non-electrolytic nature of the complexes. EPR spectroscopy indicated that the metal complexes are monomeric in nature and exhibited octahedral geometry. The redox behavior of the copper complex was studied by the cyclic voltammetric technique in DMF solution and the complex showed well-established redox behavior at a scan rate of 0.05 V s^?1. The antimicrobial activity of the ligand and its metal complexes were screened against Escherichia coli, Bacillus subtilis, Aspergillus niger, and Candida albicans, and the results indicated increased activity after coordination of the ligand to the metal ions. The metal complexes exhibited enhanced antitubercular activity after chelation against M. tuberculosis. The DNA-binding experiments showed that the ligand and its metal complexes showed effective binding properties through intercalative mode against CT-DNA. All the synthesized molecules showed partial cleavage of supercoiled plasmid pUC18 DNA.     

用含偶氮基的聚苯乙烯大分子引发剂合成两亲性嵌段共聚物

采用含偶氮基的聚苯乙烯预聚物（ＰＳ ＡＣＰＣ）作为引发剂，合成了苯乙烯（Ｓｔ）分别与甲基丙烯酸（ＭＡＡ）、甲基丙烯酸（β 羟丙酯）（ＨＰＭＡ）的嵌段共聚物，考察了ＰＳ ＡＣＰＣ引发第二单体的聚合反应行为，以及影响第二单体转化率和均聚物含量、共聚物组成的因素．用溶解性、凝胶渗透色谱（ＧＰＣ）、红外光谱（ＩＲ）、核磁共振（ＮＭＲ）、动态接触角（ＤＣＡ）等表征了嵌段共聚物．