The Influence of Dung Amendments on Dissolved Organic Matter in Grassland Soil Leachates - Preliminary Results from a Lysimeter Study

Abstract

Understanding the carbon (C) cycle in grassland pasture systems requires more information about the fate of decomposing dung material within the soil. In this soil lysimeter study we successfully applied the natural ¹³C abundance labelling technique to trace dung-C within a temperate grassland soil. Dung was collected from beef steers fed on either maize (a C₄ plant) or perennial ryegrass (a C₃ plant) silages, and applied to a freely draining (C₃) grassland soil. Leachates were collected from soil lysimeters (0–2.5) and (0–10 cm soil depth) to determine the organic carbon and ¹³C content of < 0.7 μm filtered solution. Leachates were taken from (i) control, no dung added, (ii) C₃ dung and (iii) C₄ dung amended soil. Results showed that, (i) the addition of dung resulted in a tenfold increase in C lost from the lysimeters in drainage waters, (ii) up to 50% of the C present in the leachates was ‘native’ soil C and (iii) the application of dung produced a ‘priming’ effect. Further work is required to verify; (i) whether increased leaching of native C following dung application is a ‘true priming’ phenomenon, or merely the result of ‘displacement’ or ‘pool substitution’ of soil C, and (ii) the precise conditions and mechanisms under which organic amendments induce a true ‘priming’ effect in grassland and other agricultural soils.     

Spectral,X-ray diffraction,surface morphological and thermal studies of gamma-irradiated potassium bis(oxalato)zincate(II)dihydrate

ABSTRACT

Potassium bis(oxalato)zincate(II)dihydrate was prepared and characterized. The sample was irradiated with ⁶⁰Co gamma rays up to 900?kGy. Infrared, Raman and photoluminescence spectra, X-ray diffraction pattern, surface morphology by AFM and SEM and non-isothermal decomposition of the complex were studied before and after irradiation. Spectral studies suggested significant radiation damage. X-ray diffraction studies showed reduction in unit cell volume and average crystallite size. Both unirradiated and irradiated samples of the complex belong to the hexagonal crystal system. Surface morphology of the complex changed upon irradiation. Thermal decomposition was enhanced.     

Visualisation and analysis of large-scale vortex structures in three-dimensional turbulent lid-driven cavity flow

In this paper, large eddy simulation (LES) of a three-dimensional turbulent lid-driven cavity (LDC) flow at Re = 10,000 has been performed using the multiple relaxation time lattice Boltzmann method. A Smagorinsky eddy viscosity model was used to represent the sub-grid scale stresses with appropriate wall damping. The prediction for the flow field was first validated by comparing the velocity profiles with previous experimental and LES studies, and then subsequently used to investigate the large-scale three-dimensional vortical structures in the LDC flow. The instantaneous three-dimensional coherent structures inside the cavity were visualised using the second invariant (Q), Δ criterion, λ₂ criterion, swirling strength (λ_ci) and streamwise vorticity. The vortex structures obtained using the different criteria in general agree well with each other. However, a cleaner visualisation of the large vortex structures was achieved with the λ_ci criterion and also when the visualisation is based on the vortex identification criteria expressed in terms of the swirling strength parameters. A major objective of the study was to perform a three-dimensional proper orthogonal decomposition (POD) on the fluctuating velocity fields. The higher energy POD modes efficiently extracted the large-scale vortical structures within the flow which were then visualised with the swirling strength criterion. Reconstruction of the instantaneous fluctuating velocity field using a finite number of POD modes indicated that the large-scale vortex structures did effectively approximate the large-scale motion. However, such a reduced order reconstruction of the flow based on the large-scale vortical structures was clearly not as effective in predicting the small-scale details of the fluctuating velocity field which relate to the turbulent transport.     

Ranking the spreading influence in complex networks

Identifying the node spreading influence in networks is an important task to optimally use the network structure and ensure the more efficient spreading in information. In this paper, by taking into account the shortest distance between a target node and the node set with the highest k$k$-core value, we present an improved method to generate the ranking list to evaluate the node spreading influence. Comparing with the epidemic process results for four real networks and the Barabási–Albert network, the parameterless method could identify the node spreading influence more accurately than the ones generated by the degree k$k$, closeness centrality, k$k$-shell and mixed degree decomposition methods. This work would be helpful for deeply understanding the node importance of a network.     

Acoustic characteristics of a heavy duty vehicle cooling module

Studies dedicated to the determination of acoustic characteristics of an automotive cooling package are presented. A shrouded subsonic axial fan is mounted in a wall separating an anechoic- and a reverberation room. This enables a unique separation of the up- and downstream sound fields. Microphone measurements were acquired of the radiated sound as a function of rotational speed, fan type and components included in the cooling module. The aim of the present work is to investigate the effect of a closely mounted radiator upstream of the impeller on the SPL spectral distribution. Upon examination of the SPL spectral shape, features linked specifically to the source and system are revealed. The properties of a reverberant sound field combined with the method of spectral decomposition permit an estimation of the source spectral distribution and the acoustic transfer response, respectively. Additionally, purely intrinsic acoustic properties of the radiator are scrutinized by standardized ISO methods. A new methodology comprising a dipole sound source is adopted to circumvent limitation of transmission loss measurement in the low frequency range. The sound attenuation caused by the radiator alone was found to be negligible.     

经验模态分解与样本熵在并网型光伏逆变器故障诊断中的应用

摘要：针对光伏并网逆变器电路中故障信号的非线性、非平稳特点,提出一种基于经验模态分解(EMD)和样本熵(SampEn)的故障诊断方法。首先,利用经验模态分解对逆变器的三相输出电压进行分解,得到有限个本征模式分量(IMF),从中选取包含故障主要信息的前几个本征模式分量提取故障信息。然后,计算本征模式分量的样本熵,从而得到用于故障诊断的特征向量;最后,将逆变器开路故障进行分类和编码,将故障特征向量输入BP神经网络进行模式识别,从而达到故障诊断的目的。在Matlab环境下对光伏并网逆变器的故障诊断进行了实验,实验结果证明了文中方法能实现对光伏并网逆变器的故障诊断,且与小波包变换相比,该方法具有诊断效率高和准确度高等特点。     

Homogeneous and unimolecular gas‐phase thermal decomposition kinetics of methyl benzoylformate: experimental and theoretical study

The kinetics of the gas‐phase thermal decomposition of the α‐ketoester methyl benzoylformate was carried out in a static system with reaction vessel deactivated with allyl bromide, and in the presence of the free radical inhibitor propene. The rate coefficients were determined over the temperature range of 440–481 °C and pressures from 32 to 80 Torr. The reaction was found to be homogenous, unimolecular and obey a first‐order rate law. The products are methyl benzoate and CO. The temperature dependence of the rate coefficient gives the following Arrhenius parameters: log₁₀ k (s^?1) = 13.56 ± 0.31 and E_a (kJ mol^?1) = 232.6 ± 4.4. Theoretical calculations of the kinetic and thermodynamic parameters are in good agreement with the experimental values using PBE1PBE/6‐311++g(d,p). A theoretical Arrhenius plot was constructed at this level of theory, and the good agreement with the experimental Arrhenius plot suggests that this model of transition state may describe reasonably the elimination process. These results suggest a concerted non‐synchronous semi‐polar three‐membered cyclic transition state type of mechanism. The most advanced coordinate is the bond breaking C^δ+‐‐‐^δ‐OCH₃ with an evolution of 66.7%, implying this as the limiting factor of the elimination process. Copyright © 2014 John Wiley & Sons, Ltd.     

A non-overlapping domain decomposition dual reciprocity method for solving the forward–backward heat equation in two-dimension

We apply a boundary element dual reciprocity method (DRBEM) to the numerical solution of the forward–backward heat equation in a two-dimensional case. The method is employed for the spatial variable via the fundamental solution of the Laplace equation and the Crank–Nicolson finite difference scheme is utilized to treat the time variable. The physical domain is divided into two non-overlapping subdomains resulting in two standard forward and backward parabolic equations. The subproblems are then treated by the underlying method assuming a virtual boundary in the interface and starting with an initial approximate solution on this boundary followed by updating the solution by an iterative procedure. In addition, we show that the time discrete scheme is unconditionally stable and convergent using the energy method. Furthermore, some computational aspects will be suggested to efficiently deal with the formulation of the proposed method. Finally, two forward–backward problems, for which the exact solution is available, will be numerically solved for two different domains to demonstrate the efficiency of the proposed approach.     

基于小波分解系数的贝叶斯人脸识别方法

本文给出了贝叶斯人脸识别方法中匹配准则的多个近似表达式及一种实用的快速计算方法,在此基础上,利用反对称双正交小波变换的微分算子功能,提出了一种利用两幅人脸图像的小波变换系数差作为模式矢量的贝叶斯人脸识别方法,并利用AR人脸图象库进行了实验,实验结果表明本文方法与基于图像灰度的类似方法相比,识别率提高8％左右,此外本文方法也提供了一条在图像压缩数据域中实现人脸识别的可能途径。     

Tomographic analysis of the central magnetohydrodynamic oscillations on the HT-7 tokamak

Multi-channel soft x-ray (SX) detectors are applied to generate images of magnetohydrodynamic (MHD) oscillation on the HT-7 tokamak, and the data from SX cameras are analysed by using the Fourier--Bessel harmonic reconstruction method and the singular value decomposition. The image reconstruction of SX emissivity is obtained on the assumption of plasma rigid rotation. One of the important phenomena in the HT-7 discharge is the transition from the sawtooth oscillations to the MHD oscillations when the plasma density grows higher. The MHD structure observed in the SX tomography is featured as follows: the magnetic surface of MHD structure is made up of the crescent-shaped ``hot core' and the circular ``cold bubble'. The structure of the magnetic surface is relatively stable. It rotates in the direction of the electron diamagnetic drift at a frequency being the oscillation frequency of the MHD oscillations.