双面电弧焊接的传热模型

将等离子焊接(PAW)电弧和钨极氩弧焊(TIG)电弧串接,相对作用于工件的正反面形成双面电弧焊接(DSAW)系统,可以引导焊接电流沿工件厚度方向流过小孔,补偿等离子电弧穿透工件时消耗的能量,以有效地提高等离子弧的穿透能力.综合考虑影响双面电弧焊接正反面熔池几何形状的力学因素,建立了熔池表面变形的控制方程,以此为基础并采用帖体曲线坐标系建立了DSAW焊接传热的数学模型,分析了DSAW,PAW焊接传热的差异,从传热的角度解释了DSAW焊接熔深增加的原因.焊接工艺实验表明,计算结果与实测结果吻合良好. 关键词： 双面电弧焊接(DSAW) 传热模型 熔池表面变形模型     

类Kerr介质中双模SU(1,1)相干态场与Λ型三能级原子相互作用的量子统计性质

导出了类Kerr介质中双模SU(1,1)相干态场与Λ型三能级原子相互作用系统的态函数,研究了Kerr效应对Λ型三能级原子布居概率、双模SU(1,1)相干态场的互关联函数、Cauchy-Schwartz不等式及二阶相干度的影响.结果表明:Kerr效应使原子与光场的耦合减弱,原子布居的崩塌与复苏的周期缩短;在初始光场较弱和较强两种情况下,类Kerr介质对双模SU(1,1)相干态场两模间的相关性、相关程度以及光子的聚束与反聚束效应产生的作用有明显的区别.     

Coupled perpendicular magnetization in Fe/Cu/Fe trilayers

Ultrathin epitaxial Fe films on Cu(1 0 0) with perpendicular magnetization have been used as templates for the preparation of FCC Fe/Cu/Fe trilayers. The magnetic anisotropy and the coupling of these films have been studied by in-situ magneto optical Kerr effect measurements and Kerr microscopy. The magnetic coupling of both Fe layers is found to be dominated by magnetostatic interaction. Adsorbate-induced spin reorientation in the top layer also causes spin reorientation in the bottom layer. The governing role of the Fe-vacuum interface for the magnetism of the whole trilayer is demonstrated.     

Trovacenchemie. 13 [1] Weg und Irrweg zu Di([5]trovacenyl)keton

Trovacene Chemistry. 13 [1] On Being Lead and Mislead in the Synthesis of Di([5]trovacenyl)ketone Di([5]trovacenyl)ketone ( 3¨ ) has been prepared from lithio‐[5]trovacene and dimethylcarbamoyl chloride and studied by X‐ray diffraction, cyclic voltammetry, magnetic susceptometry and EPR spectroscopy. Slight variation of the synthetic protocol affords an unusual trinuclear complex 5 ? that is also fully characterized. Spin‐spin exchange interaction is smaller in 3¨ than in 1,1‐di([5]trovacenylethene ( 2¨ ), which differs from 3¨ by a replacement of O for CH₂. The novel trinuclear complex 5 ? , however, displays exchange coupling very similar to that observed in 1‐methoxy‐2,5,6‐tri([5]trovacenyl)benzene ( 7 ? ). In both cases, an unsymmetrical triangular arrangement of S = 1/2 centers is encountered. These findings are discussed in terms of the nature of the respective spacers.     

Error estimation,adaptivity and data transfer in enriched plasticity continua to analysis of shear band localization

In this paper, an adaptive FE analysis is presented based on error estimation, adaptive mesh refinement and data transfer for enriched plasticity continua in the modelling of strain localization. As the classical continuum models suffer from pathological mesh-dependence in the strain softening models, the governing equations are regularized by adding rotational degrees-of-freedom to the conventional degrees-of-freedom. Adaptive strategy using element elongation is applied to compute the distribution of required element size using the estimated error distribution. Once a new mesh is generated, state variables and history-dependent variables are mapped from the old finite element mesh to the new one. In order to transfer the history-dependent variables from the old to new mesh, the values of internal variables available at Gauss point are first projected at nodes of old mesh, then the values of the old nodes are transferred to the nodes of new mesh and finally, the values at Gauss points of new elements are determined with respect to nodal values of the new mesh. Finally, the efficiency of the proposed model and computational algorithms is demonstrated by several numerical examples.     

The statement and numerical solution of an optimization problem in X-ray tomography

A nonclassical problem is considered for the transport equation with coefficients depending on the energy of radiation. The task is to find the discontinuity surfaces for the coefficients of the equation from measurements of the radiation flux leaving the medium. For this tomography problem, an optimization problem is stated and numerically analyzed. The latter consists in determining the radiation energy that ensures the best reconstruction of the unknown medium. A simplified optimization problem is solved analytically.     

Magnetic and electrical transport properties of delta-doped amorphous Ge:Mn magnetic semiconductors

We report on the growth and characterization of delta-doped amorphous Ge:Mn diluted magnetic semiconductor thin films on GaAs (0 0 1) substrates. The fabricated samples exhibit different magnetic behaviors, depending on the Mn doping concentration. The Curie temperature was found to be dependent on both the Mn doping concentration and spacing between the doping layers. A sharp drop in magnetization and rise in resistivity are observed at low temperature in samples with high Mn doping concentrations, which is also accompanied by a negative thermal remanent magnetization (TRM) in the higher temperature range. The temperature at which the magnetization starts to drop and the negative TRM appears show a correlation with the Mn doping concentration. The experimental results are discussed based on the formation of ferromagnetic regions at high temperature and antiferromagnetic coupling between these regions at low temperature.     

Latex particles bearing hydrophilic grafted hairs with controlled chain length and functionality synthesized by reversible addition–fragmentation chain transfer

A method is described for synthesizing latex particles with anchored hairs by the grafting of hydrophilic chains, synthesized by reversible addition–fragmentation chain transfer, onto functionalized latex particles. These have the potential to bind biologically active species. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1188–1195, 2003