5,7′-(亚甲胺基)-二-8-羟基喹啉的合成及其理论研究

以4-甲基苯磺酸作催化剂、用三乙胺调节pH值约为9的条件下, 由5-甲酰基-8-羟基喹啉和5-氨基-8-羟基喹啉合成了新的5,7′-(亚甲胺基)-二-8-羟基喹啉, 利用IR, UV, ¹H NMR, MS确认了分子结构, 比较研究了其光致发光特性, 运用Gaussian 98量子化学程序包, 采用B3LYP密度泛函(DFT)的方法, 在6-31G(d,p)水平上对分子的几何构型进行结构优化; 并对目标化合物的稳定结构通过计算预测其振动光谱, 计算结果与实验值基本相符.     

A comparative study of the thermal reactivities of some transition metal oxalates in selected atmospheres

A comparative investigation has been made of the nonisothermal, solid-state thermal decompositions of the oxalates of six divalent transition metals (cations: manganese, iron, cobalt, nickel, copper and zinc) in alternative flowing atmospheres, inert (N₂, CO₂), reducing (H₂) and oxidizing (air). Derivative thermogravimetry (DTG) and differential scanning calorimetry (DSC) response peak maxima, providing a measure of reaction temperatures, have been used to determine salt reactivities and thus to characterize the factors that control the relative stabilities of this set of chemically related reactants. Two trends were identified. Trend (1): in the inert and reducing atmospheres, the decomposition temperature (salt stability) increased with rise in enthalpy of formation of the divalent transition metal oxide, MO. It is concluded that the rupture of the cation-oxygen (oxalate) bond is the parameter that determines the stability of salts within this set. Trend (2): the diminution of decomposition temperatures from values for reactions in inert/reducing atmosphere to those for reactions in an oxidizing atmosphere increased with the difference in formation enthalpy between MO and the other participating oxide (MO_3/2 or MO_1/2). The change of cation valence tended to promote reaction, most decompositions in O₂ occurred at lower temperatures, but the magnitude of the effect varied considerably within this set of reactants. Observed variations in stoichiometric and kinetic characteristics with reaction conditions are discussed, together with the mechanisms of thermal decompositions of these solid oxalates.This approach to the elucidation of crystolysis reaction mechanisms emphasizes the value of comparative investigations within the group of chemically related reactants. Previous isothermal kinetic studies had been made for each of the reactants selected here. From these, much has been learned about the form of the (isothermal) solid-state yield-time curves, often interpreted to provide information about the geometry of interface development for the individual rate processes. However, identification of the controls of reactivity, reaction initiation (nucleation) and advance (nucleus growth), is much more difficult to characterize and less progress has been made towards elucidation of the interface chemistry. The trends of reactivity changes with salt compositions, identified here, offer a complementary approach to that provided by the study of single salts. Much of the recent literature on thermal decompositions of solids has been concerned with individual reactants, but many results and conclusions are not presented in the widest possible perspective. Comparisons between systematically related reactants are identified here as providing a chemical context for the elucidation of the chemical steps that participate in interface reactions. The article advocates the use of a more chemical approach in investigations of crystolysis (solid-state chemical) reactions.     

A novel phosphoramidite method for automated synthesis of oligonucleotides on glass supports for biosensor development

Two protocols for functionalization of glass supports with hexaethylene glycol (HEG)-linked oligonucleotides were developed. The first method (standard amidite protocol) made use of the 2-cyanoethyl-phosphoramidite derivative of 4,4′-dimethoxytrityl-protected HEG. This was first coupled to the support by standard solid-phase phosphoramidite chemistry followed by extension with a thymidylic acid icosanucleotide. Stepwise addition of the linker phosphoramidite graduated at 1% (relative to the total sites available) perstep at 50°C resulted in an optimal yield of immobilized oligonucleotides at a density of 2.24 × 10¹⁰ strands/mm². This observed loading maximum lies well below the theoretical maximum loading owing to nonspecific adsorption of HEG on the glass and subsequent blocking of reactive sites. Surface loadings as high as 3.73 × 10¹⁰/mm² and of excellent sequence quality were achieved with a reverse amidite protocol. The support was first modified into a 2-cyanoethyl-N,N-diisopropylphosphoramidite analog followed by coupling with 4,4′-dimethoxytrityl-protected HEG. This protocol is conveniently available when using a conventional DNA synthesizer. The reverse amidite protocol allowed for control of the surface loading at values suitable for subsequent analytical applications that make use of immobilized oligonucleotides as probes for selective hybridization of sample nucleic acids of unknown sequence and concentration.     

Microwave-assisted conversion of N-substituted oxazolidin-2,4-diones into α-hydroxyamides

N-Substituted oxazolidin-2,4-diones have been synthesized in a novel one-pot reaction by reacting cyanohydrins stepwise with 1,1′-carbonyldiimidazole and primary amines followed by acidic hydrolysis of the intermediate 4-imino-oxazolidin-2-ones. Their microwave-assisted conversion into α-hydroxyamides was accomplished by treatment with catalytic amounts of sodium methoxide in methanol.     

An alternative efficient redox couple for the dye-sensitized solar cell system

A series of new cobalt complexes [Co(LLL)(2)X(2)] were synthesized and evaluated as redox mediators for dye-sensitized nanocrystalline TiO(2) solar cells. The structure of the ligand and the nature of the counterions were found to influence the photovoltaic performance. The one-electron-transfer redox mediator [Co(dbbip)(2)](ClO(4))(2) (dbbip = 2,6-bis(1'-butylbenzimidazol-2'-yl)pyridine) performed best among the compounds investigated. Photovoltaic cells incorporating this redox mediator yielded incident photon-to-current conversion efficiencies (IPCE) of up to 80%. The overall yield of light-to-electric power conversion reached 8 % under simulated AM1.5 sunlight at 100 W m(-2) intensity and more than 4% at 1000 W m(-2). Photoelectrodes coated with a 2 microm thick nanoporous layer and a 4 microm thick light-scattering layer, sensitized with a hydrophobic ruthenium dye, gave the best results.     

Electrospray mass and tandem mass spectrometry of homologous and isomeric singly, doubly, triply and quadruply charged cationic ruthenated meso-(phenyl)m-(meta- and para-pyridyl)n (m + n = 4) macrocyclic porphyrin complexes

Ten homologous or isomeric singly, doubly, triply and quadruply charged cationic macrocyclic complexes I-Va, bn+ (n = 1-4) formed by the coordination of [Ru(bipy)2Cl]+ to the pyridyl N-atoms of a series of meso-(phenyl)m-(meta or para-pyridyl)n-porphyrins (m + n = 4) were transferred to the gas phase and structurally characterized by electrospray ionization (ESI) mass (MS) and tandem mass (MS/MS) spectrometry. Previously known to be stable in solution and in the solid state, I-Va, bn+ are found to constitute also a new class of stable, long-lived multiply charged gas-phase ions with spatially separated charge sites. Increasing intramolecular electrostatic repulsion from Ia, b+ to IVa, b3+ facilitates in-source and tandem collision-induced dissociation (CID). However, for the quadruply charged ions Va, b4+, electrostatic repulsion is alleviated mainly by ion pairing with the CF3SO3- counterion forming the salt clusters [Va,b/CF3SO3]3+ and [Va,b/(CF3SO3)2]2+ with reduced charge states. Ion-pairing that yields [IVa,b/CF3SO3]2+ is also observed as a minor ESI process for the triply charged ions IVa, b3+. The gaseous ions I-Va, bn+ (n = 2, 3 or 4) dissociate by sequential 'charge partitioning' with the formation of two cationic fragments by the release of [Ru(bipy)2Cl]+. The meta (a) and para (b) isomers and the positional isomers II2+ and III2+ display nearly identical ESI-MS and ESI-MS/MS spectra. ESI-MS/MS of I-Va, bn+ shows that the Ru-py(P) is, intrinsically, the weakest bond since this bond breaks preferentially upon CID.     

Two 3D supramolecular polymers constructed from an amino acid and a high-nuclear Ln6Cu24 cluster node

The first successful attempt to construct 3D supramolecular frameworks with high-nuclear 3d-4f heterometallic clusters as a node is reported. The self-assembly of Ln3+, Cu2+ and amino acid in solution leads to the formation of two polymers, 35-nuclear complex [Sm6Cu29] 1 with a primitive cubic net-like structure and 36-nuclear complex [Nd6Cu30] 2 with a face-centred cubic network type structure. Glycine and L-proline, respectively, were used as ligands. It should be noted that 2 has a chiral framework. X-ray structure analyses show that 1 crystallizes in the triclinic P1 space group (a=19.6451(8), b=20.4682(8), c=20.7046(8) A, alpha=89.453(1), beta=66.290(1), gamma=68.572(1) degrees, V=7003.0(5) A3 and Z=1) and 2 belongs to the cubic P2(1)3 space group (a=b=c=32.4341(3) A, V=34 119.7(5) A3 and Z=4). Both complexes utilize Ln6Cu24 octahedral clusters as nodes and trans-Cu(amino acid)2 groups as bridges. Electrical conductivity measurements reveal that both polymers behave as semiconductors.     

Quantum chemical modeling for 157 nm photolithography

In its continuing quest for smaller length scales, the electronics industry plans to introduce 157 nm as the next lithographic wavelength. Accordingly, there is a pressing need to develop photoresists that are more transparent, and pellicles that are both more transparent and more durable. With the advent and popularization of time-dependent density functional theory (TD-DFT), we now have a practical quantum chemical method for calculating excitation energies and transition moments in the vacuum ultraviolet (VUV) which can greatly assist in the scouting of highly transparent materials. We have performed TD-DFT calculations for a broad variety of fluorinated molecules and we will report calculated VUV photoabsorption spectra for a large family of model fluorohexanes. These calculations, which span a range from 1-fluorohexane to CH₃CF₂CF₂CF₂CF₂CH₃, illustrate some of the principles one may use to design low absorption polymeric materials.     

Partial least-squares regression and fuzzy clustering — A joint approach

Chemical and physical analyses of malt, the main ingredient of beer, have been used to predict the concentration of certain volatile compounds in the finished beer.The prediction was done by means of the partial least squares regression (PLS2) in SIMCA. The total data set as well as individual malt clusters were submitted to PLS analysis. Best prediction was obtained by separating the total object matrix in classes according to similarity found by fuzzy pattern recognition (FCV). FCV was also used to separate the beer variables in classes and to select the subset of variables to be predicted.A joint approach of fuzzy pattern recognition to identify groups of samples and SIMCA-PLS2 to predict several dependent variables is suggested as a powerful tool in process-analytical chemistry.     

Ternary Fission

In this review paper, ternary fission is defined as the break-up of heavy nuclei into three fragments of approximately equal mass. This relatively new type of nuclear decay has been investigated intensively during the last decade. Muga has studied ternary fission induced by thermal neutrons in uranium. The results of his experiments are discussed in detail. Ternary fission can definitely be observed and studied in the interaction of heavy target elements with 39 MeV alpha particles, 20 GeV protons, and 300—400MeV argon ions. The ratio of binary-to-binary fission for uranium is approximately 10^?4: 100 in the interaction of 39 MeV alpha particles, approximately 0.1:100 for 20 GeV protons, and 3:100 for 400MeV argon ions. A theoretical model for the interpretation of ternary fission, the “cascade model”, is described. The paper concludes with a discussion of the possible connection of ternary fission with the production and decay of still undiscovered super-heavy elements (Z = 114).