Determination of N-nitrosomethylaniline and methylaniline in the gas phase

A method is described for selective sampling and determination of gaseous N-nitrosomethylaniline (NMA) and methylaniline (MA) in air without artifacts. Therefore a denuder system is developed to distinguish between the amine and the nitroso compound during sampling. A spatial separation of the gas phase of these compounds is realized. The detection is performed after gas Chromatographic separation with a thermal energy analyzer (TEA) for the nitrosamine and with flame ionization detector (FID) for the amine and nitrosamine. Besides the sampling technique, the extraction of the samples and detection principles are described. To prove that the formation of artifacts does not appear, the influence of humidity and nitrogen oxides was investigated.Dedicated to Professor Dr. H. Malissa on the occasion of his 75th birthday     

High-field localized 1H NMR spectroscopy in the anesthetized and in the awake monkey

Localized cerebral in vivo ¹H NMR spectroscopy (MRS) was performed in the anesthetized as well as the awake monkey using a novel vertical 7 T/60 cm MR system. The increased sensitivity and spectral dispersion gained at high field enabled the quantification of up to 16 metabolites in 0.1- to 1-ml volumes. Quantification was accomplished by using simulations of 18 metabolite spectra and a macromolecule (MM) background spectrum consisting of 12 components. Major cerebral metabolites (concentrations >3 mM) such as glutamate (Glu), N-acetylaspartate (NAA), creatine (Cr)/phosphocreatine (PCr) and myo-inositol (Ins) were identified with an error below 3%; most other metabolites were quantified with errors in the order of 10%. Metabolite ratios were 1.39:1 for total NAA, 1.38:1 for glutamate (Glu)/glutamine (Gln) and 0.09:1 for cholines (Cho) relative to total Cr. Taurine (Tau) was detectable at concentrations lower than 1 mM, while lactate (Lac) remained below the detection limit. The spectral dispersion was sufficient to separate metabolites of similar spectral patterns, such as Gln and Glu, N-acetylaspartylglutamate (NAAG) and NAA, and PCr–Cr. MRS in the awake monkey required the development and refinement of acquisition and correction strategies to minimize magnetic susceptibility artifacts induced by respiration and movement of the mouth or body. Periods with major motion artifacts were rejected, while a frequency/phase correction was performed on the remaining single spectra before averaging. In resting periods, both spectral amplitude and line width, that is, the voxel shim, were unaffected permitting reliable measurements. The corrected spectra obtained from the awake monkey afforded the reliable detection of 6–10 cerebral metabolites of 1-ml volumes.     

Correct Identification of the Core-Shell Structure of Cell Membrane-Coated Polymeric Nanoparticles

Transmission electron microscopy (TEM) observations of negatively stained cell membrane (CM)-coated polymeric nanoparticles (NPs) reveal a characteristic core-shell structure. However, negative staining agents can create artifacts that complicate the determination of the actual NP structure. Herein, it is demonstrated with various bare polymeric core NPs, such as poly(lactic-co-glycolic acid) (PLGA), poly(ethylene glycol) methyl ether-block-PLGA, and poly(caprolactone), that certain observed core-shell structures are actually artifacts caused by the staining process. To address this issue, fluorescence quenching was applied to quantify the proportion of fully coated NPs and statistical TEM analysis was used to identify and differentiate whether the observed core-shell structures of CM-coated PLGA (CM−PLGA) NPs are due to artifacts or to the CM coating. Integrated shells in TEM images of negatively stained CM−PLGA NPs are identified as artifacts. The present results challenge current understanding of the structure of CM-coated polymeric NPs and encourage researchers to use the proposed characterization approach to avoid misinterpretations.     

Ring artifacts correction based on the projection-field in neutron CT

Ring artifacts will happen mostly when the detector has inconsistent response among the detector channels, and the characteristic produced rings centered in the iso-center in the reconstructed slices inevitably affect the recognition and analysis of the corresponding sample structures in neutron computed tomography(CT). In this work, a ring correction method based on the projection-field(RCP) is proposed, it is a pre-processing method and provides the corrected projection data directly, which is also conducive to efficient data storage and other algorithmic researches. Simulation and physical experiments are performed for verifying the effect of the method, and one of the correction methods based on the imagefield is used for comparison. The results demonstrate that the RCP can correct the ring artifacts well without reducing the image resolution or over-correction.     

Simple Accurate Verification of Enthalpy-Entropy Compensation and Isoequilibrium Relationship

In many experimental investigations of thermodynamic equilibrium or kinetic properties of series of similar reactions it is found that the enthalpies and entropies derived from Van ′t Hoff or Arrhenius plots exhibit a strong linear correlation. The origin of this Enthalpy-Entropy compensation, which is strongly related to the coalescence tendency of Van ′t Hoff or Arrhenius plots, is not necessarily due to a physical/chemical/biological process. It can also be a merely statistical artefact. A new method, called Combined K-CQF makes it possible both to quantify the degree of coalescence of experimental Van ‘t Hoff lines and to verify whether or not the Enthalpy-Entropy Compensation is of a statistical origin at a desired confidence level. The method is universal and can handle data sets with any degree of coalescence of Van ‘t Hoff (or Arrhenius) plots. The new method requires only a standard least square fit of the enthalpyΔH versus entropy ΔS plot to determine the two essential dimensionless parameters K and CQF. The parameter K indicates the position (in inverse temperature) of the coalescence region of Van ‘t Hoff plots and CQF is a quantitative measure of the smallest spread of the Van ‘t Hoff plots. The position of the (K, CQF) couple with respect to universal confidence contours determined from a large number of simulations of random Van ‘t Hoff plots indicates straightforwardly whether or not the ΔH-ΔS compensation is a statistical artefact.     

External removal of endpoint-discontinuity artifacts in the reciprocal-space analysis of spectra

We present a systematic method of removing endpoint-discontinuity artifacts in the Fourier analysis of spectral segments, enabling the more accurate extraction of information. This principal-component-removal approach differs from a previous version by using extrapolated (or extended) data outside rather than inside the spectral range. This not only allows coefficients to be accessed to the white-noise limit with no distortion of the segment, but also generates interpolated coefficients for improved analytic insight. Examples are provided.     

Studying banded spherulites in HDPE by electron microscopy

HDPE is a semi-crystalline thermoplastic polymer, with remarkable physical properties such as high chemical resistivity, high impact strength, and high modulus. Compared to the other semi-crystalline polymers, HDPE mostly possesses a high crystallinity, due to which, it exhibits a unique combination of mechanical and chemical resistance properties. In the present work, we have characterized the crystalline spherulites of neat and formulated HDPE compositions thoroughly characterized by different electron microscopy techniques such as scanning electron microscopy (SEM) and transmission electron microscopy (TEM). One of the critical steps to obtaining well-resolved SEM images is the sample preparation that typically involves the etching process to elucidate the crystalline spherulites. Though such traditional methodology can effectively be used for neat HDPE, it leads to the creation of undesirable experimental artifacts when used to investigate formulated HDPE compositions. An alternate TEM-based method provides clear images without any artifacts, apart from being a direct and green method and taking relatively a lesser measurement time.     

Improvement of image quality using BLADE sequences in brain MR imaging

The purpose of this study is to compare two types of sequences in brain magnetic resonance (MR) examinations of uncooperative and cooperative patients. For each group of patients, the pairs of sequences that were compared were two T2-weighted (T2-W) fluid attenuated inversion recovery sequences with different k-space trajectories (conventional Cartesian and BLADE) and two T2-TSE weighted with different k-space trajectories (conventional Cartesian and BLADE). Twenty-three consecutive uncooperative patients and 44 cooperative patients, who routinely underwent brain MR imaging examination, participated in the study. Both qualitative and quantitative analyses were performed based on the signal-to-noise ratio, contrast-to-noise ratio (CNR), and relative contrast (ReCon) measures of normal anatomic structures. The qualitative analysis was performed by experienced radiologists. Also, the presence of motion, other (e.g., Gibbs, susceptibility artifacts, phase encoding from vessels) artifacts and pulsatile flow artifacts was evaluated.     

Artifacts in magnetic resonance imaging after surgical resection of brain tumors

Background

Since the advent of magnetic resonance imaging, metal artifacts have posed an important diagnostic problem in different fields of medicine. However, this has not been systematically studied in patients undergoing surgery for brain tumors.

Objective

This study was planned to assess whether metal artifacts can occur in patients undergoing brain surgery without metallic implants.

Methods

Of 40 individuals who could be included because of having a pre- and postoperative MRI and a postoperative computed tomography (CT) scan or a conventional skull X-ray for the detection of metallic artifacts, 26 patients agreed to participate in this study and gave informed consent.

Results

Twenty-six subjects, 12 males and 14 females, with an age range of 12 to 54 years, were included in the study. Four patients were found to have gross metal particles in their postoperative brain CTs and were excluded. Of the remaining 22 subjects, 7 patients (31.8%) had metallic artifacts.

Conclusion

Our study showed that simple bone drilling or chiseling during surgical manipulation of skull bones may result in separation of very tiny metal particles which can remain in the surgical site and cause artifacts in postoperative MRIs. This finding appeared to be independent of factors such as age, sex, tumor/incision site, tumor size, pathologic tumor type, total radiation dose, operation–MRI time interval and sequence of MRI.     

Usefulness of slice encoding for metal artifact correction (SEMAC) for reducing metallic artifacts in 3-T MRI

Purpose

The purpose of the study was to assess the usefulness of slice encoding for metal artifact correction (SEMAC) in 3.0-T magnetic resonance (MR) in minimizing metallic artifacts in patients with spinal prostheses.

Materials and Methods

Institutional review board approval and informed consent were obtained for this study. Twenty-seven spine MR scans were performed with metal artifact reduction SEMAC between May 2011 and July 2012 in patients with metallic devices. The MR scans were performed on a 3-T MR system (Achieva; Philips Healthcare, Best, the Netherlands) including SEMAC-corrected T2-weighted axial/sagittal images and two-dimensional fast spin echo (FSE) axial/sagittal images. The SEMAC-corrected images were compared to conventional T2-weighted FSE images. Two musculoskeletal radiologists qualitatively analyzed the images in terms of visualization of the pedicle, vertebral body, dural sac, intervertebral disc, intervertebral neural foramina, screws and metallic artifacts. The paired images were rated using a 5-point scale. P values less than .05 were considered to indicate statistically significant differences.

Results

The SEMAC-corrected MR images significantly reduced the metal-related artifacts. The T2-weighted images with SEMAC sequences enabled significantly improved periprosthetic visualizations of the pedicle, vertebral body, dural sac and neural foramina, with the exception of the intervertebral disc (P < .05). In addition, there was significant improvement in prosthesis visualization (P < .05).

Conclusion

MR images with SEMAC can reduce metal-related artifacts, providing improved delineation of the prosthesis and periprosthetic region. However, for the evaluation of the intervertebral disc, the SEMAC-corrected MR images showed no significant benefits.