Optical Storage in Side-Chain Liquid Crystalline Polyesters

Long-term, high resolution holographic storage has been achieved in side-chain liquid crystalline polyesters with high diffraction efficiency. The information can be completely erased by heating the film to about 80°C. The modular architecture of the polyesters permits a varition in the length of the main- and side-chains and the substituents of the azo chromophore. Each of these has a profound influence on the storage properties of the polyesters. In this article, we examine the influence of the length of the side-chains, the probe-beam-polarization dependence of the observed signal on the interface and the crystalline vs. amorphous nature of the films for optical storage.     

南极海洋芳香烃低温降解微生物的拉曼光谱分析

激光镊子拉曼光谱技术可以实现在自然状态下对单个细胞或细胞器较长时间的观察研究.应用激光镊子拉曼光谱技术实时观察南极微生物低温降解芳香烃过程中单个南极细菌的细胞生长和胞内生物大分子的动态变化过程,收集、分析其拉曼光谱,结果发现:单细胞的拉曼光谱反映了其细胞内部的生命物质组成,南极动球菌 NJ41 和希瓦氏菌 NJ49 生...     

3-D simulation of soot formation in a direct-injection diesel engine based on a comprehensive chemical mechanism and method of moments

Here, we propose both a comprehensive chemical mechanism and a reduced mechanism for a three-dimensional combustion simulation, describing the formation of polycyclic aromatic hydrocarbons (PAHs), in a direct-injection diesel engine. A soot model based on the reduced mechanism and a method of moments is also presented. The turbulent diffusion flame and PAH formation in the diesel engine were modelled using the reduced mechanism based on the detailed mechanism using a fixed wall temperature as a boundary condition. The spatial distribution of PAH concentrations and the characteristic parameters for soot formation in the engine cylinder were obtained by coupling a detailed chemical kinetic model with the three-dimensional computational fluid dynamic (CFD) model. Comparison of the simulated results with limited experimental data shows that the chemical mechanisms and soot model are realistic and correctly describe the basic physics of diesel combustion but require further development to improve their accuracy.     

Trace analysis of polycyclic aromatic hydrocarbons using calixarene layered gold colloid film as substrates for surface‐enhanced Raman scattering

A surface‐enhanced Raman scattering (SERS) active substrate for the detection of polycyclic aromatic hydrocarbons (PAHs) was developed, which used 25, 27‐dimercaptoacetic acid‐26, 28‐dihydroxy‐4‐terbutyl calix[4]arene (DMCX) to functionalize a gold colloid film. This SERS‐active substrate prepared by self‐assembly method exhibits a high sensitivity, especially for the detection of PAHs. With the use of this SERS‐active substrate and with the application of the shifted excitation Raman difference spectroscopy (SERDS) technique, Raman signals of pyrene and anthracene in aqueous solutions at low concentration level (500 pM) can be obtained. Moreover, because PAHs are blocked from being directly adsorbed on gold colloid by DMCX and the photochemical reactions of adsorbates are avoided, the Raman bands of PAHs adsorbed on DMCX‐fuctionalized gold colloid film can be one‐to‐one correspondence with those of solid PAHs, and additionally, this SERS‐active substrate can be easily cleaned and reused. The obtained results demonstrate that the DMCX‐functionalized gold colloid films prepared by self‐assembly method have great potential to be developed to an in situ PAHs detection substrate. Copyright © 2012 John Wiley & Sons, Ltd.     

Relation between structure and enthalpy for stacking interactions of aromatic molecules

An approximately linear correlation has been found between the enthalpy of complexation and the area of overlap of the chromophores using published structural and thermodynamical data on the self- and hetero-association of aromatic molecules measured under similar solution conditions. This finding is consistent with the assumption that short-range van-der-Waals forces dominate over other contributions to the enthalpy of stacking of aromatic molecules. It provides a ‘model-independent’ approach for a priori estimation of the enthalpy of aromatic–aromatic stacking interactions from knowledge of the structural properties or vice versa.     

Polycyclic aromatic hydrocarbons from the co-pyrolysis of catechol and 1,3-butadiene

In order to better understand the reactions responsible for the formation and growth of polycyclic aromatic hydrocarbons (PAH) from solid fuels, we have performed pyrolysis experiments in an isothermal laminar-flow reactor (at temperatures of 600-1000 °C and a fixed residence time of 0.3 s) with catechol, a model fuel representative of the aromatic moieties in coal and biomass fuels; 1,3-butadiene, a major product of biomass pyrolysis; and with catechol and 1,3-butadiene together (in a catechol-to-1,3-butadiene molar ratio of 0.83). No PAH of ?3 rings are produced at temperatures <700 °C, but PAH production becomes significant at temperatures ?800 °C. Analysis of the higher-temperature reaction products by high-pressure liquid chromatography with diode-array ultraviolet-visible absorbance detection has led to the identification of over 100 PAH (ranging in size to 10 fused aromatic rings) - 47 of which have never before been reported as products of any phenol-type fuel. Quantification of the product yields shows that a much higher percentage of fed carbon is converted to PAH in the catechol-only pyrolysis experiments than in the 1,3-butadiene-only pyrolysis experiments - a result attributable to catechol’s relatively labile O-H bond and capacity for generating oxygen-containing radicals, which accelerate both fuel conversion and the pyrolysis reactions leading to 1- and 2-ring aromatics and PAH. When the two fuels are co-pyrolyzed, the percentage of the total fed carbon converting to PAH is more than two times higher than the amount calculated for the hypothetical case of the two fuels together behaving as a linear combination of the two fuels individually. This elevated production of PAH from the co-pyrolysis experiments reflects not only the reaction-accelerating role of the oxygen-containing radicals but also the efficacy, as growth agents, of the C₂ - and especially the C₄ - species abundantly present in the catechol/1,3-butadiene co-pyrolysis environment.     

NMR and DFT studies on persistent carbocations derived from benzo[kl]xanthene,dibenzo[d,d′]benzo[1,2‐b:4,3‐b′]difuran,and dibenzo[d,d′]benzo[1,2‐b:4,5‐b′]difuran in superacidic media

Persistent carbocations generated by the protonation of hetero‐polycyclic aromatic compounds with oxygen atom(s) were studied by experimental NMR and density function theory calculations. Benzo[kl]xanthene ( 1 ), dibenzo[d,d′]benzo[1,2‐b:4,3‐b′]difuran ( 2 ), and dibenzo[d,d′]benzo[1,2‐b:4,5‐b′]difuran ( 3 ) were synthesized by the annulation of arenediazonium salts. Compound 1 in FSO₃H‐SbF₅ (4:1)/SO₂ClF and 3 in FSO₃H‐SbF₅ (1:1)/SO₂ClF ionized to 1aH⁺ with protonation at C(4) and to 3aH⁺ with protonation at C(6), and these cations were successfully observed by NMR at low temperatures. The density function theory calculations indicated that 1aH⁺ and 3aH⁺ were the most stable protonated carbocations and that 2 should ionize to 2aH⁺ with protonation at C(6). According to the changes in ¹³C chemical shifts (Δδ¹³C), the positive charge was delocalized into the naphthalene unit for 1aH⁺ , into one benzo[b,d]furan unit for 2aH⁺ , and into one benzo[b,d]furan unit for 3aH⁺ . Copyright © 2015 John Wiley & Sons, Ltd.     

分子电性作用矢量法用于取代芳烃的构效关系研究

基于定量结构-活性相关(QSAR)研究取代芳烃类化合物的性质具有重要意义。采用分子电性作用失量(MEIV)表征取代芳烃类有机毒物的分子结构,运用多元线性回归建立定量结构毒性相关(QSTR)模型,同时采用逐步回归结合统计检测筛选模型变量,建立了25个取代芳烃类有机污染物结构与呆鲦鱼(Pimephales Promelas)96h半数致死浓度 回归方程。另外采用内部及外部双重验证的办法深入分析和检验模型的稳定性。建模的复相关系数(Rcum2)、留一法(LOO)交互校验复相关系数(RCV2)和外部样本校验复相关系数(Qext2)分别为0.926、0.870和0.875。表明用MEIV表征取代芳烃类有机物分子结构信息较好,所建QSTR模型的稳定性和预测能力良好。     

Structural and electronic properties of potassium-doped 1,2;8,9-dibenzopentacene superconductor: comparing with doped [7]phenacenes

Polycyclic aromatic hydrocarbons doped by metal have exhibited the potential of high temperature superconductivity. Understanding the basic properties of materials is the key to reveal the superconductivity. Here, a systemically theoretical study has been done to explore crystal structures and electronic properties of pristine and potassium-doped 1,2;8,9-dibenzopentacene, compared with [7]phenacenes case. We determined that vdW-DF2 functional is more suitable to describe the non-local interaction in a molecular crystal. Based on this functional, we predicted the crystal structures and investigated in detail the K atomic positions in a system. It was found that the intralayer doping leads to lower total energy. From the calculated formation energy, for each 1,2;8,9-dibenzopentacene molecule, the doping of two electrons is more stable under the relatively K-poor condition while the doping of four electrons is more stable under the K-rich condition. Between these two phases, the three-electron doping phase stabilises in a narrow region of K chemical potential. Combining with the electronic states at Fermi level, we analysed the reasons of superconductivity enhancement in doped 1,2;8,9-dibenzopentacene. This work further deepens the understanding of 1,2;8,9-dibenzopentacene superconductor.     

铽与两种不同结构羧酸配合物的低温固相合成及发光性质研究

以两种不同结构的羧酸苯乙酸和苯基羟基乙酸与氯化铽为原料,采用低温固相反应合成了两种羧酸铽配合物。经元素分析、稀土络合滴定、摩尔电导确定了配合物的组成为： Tb(L₁)₃·H₂O,Tb(L₂)₃·4H₂O(L₁= C₆H₅ CH COO- ,L₂=C₆H₅CH(OH)COO-)。测定了配体及配合物的IR谱、1H NMR及配体的磷光光谱和铽配合物荧光激发和发射光谱。根据磷光发射光谱数据计算了配体的三重态能级值。比较两个配合物的荧光发射主峰5D₄→7F₅强度： 苯基羟基乙酸铽为苯乙酸铽的5倍。由此可见在配体亚甲基上引入拉电子基团羟基,将会扩大共轭体系π电子的离域范围,提高能量传递效率,提高稀土离子的发光强度。