Micellar Effects on Alkaline Hydrolysis of 3,5-Dinitro-2-chloro Benzotriflouride and 2,4-Dinitrochloro Benzene in Aqueous-Acetonitrile Mixtures

Reaction rate for alkaline hydrolysis of the substrates 3,5-dinitro-2-chloro benzotriflouride (DNCBTF) (1) at 30°C and 2,4-dinitrochloro benzene (DNCB) (2) at 50°C separetely with NaOH as nucleophile is carried out spectrophotometrically in mixed aqueous-acetonitrile solvents. In each system, cationic surfactant as dodecyltrimethyl ammonium bromide (DoTAB), or anionic one as sodium dodecyle sulfate (SDS) is used in wide range of concentrations to study the effect of micelle on the reaction rate. The micellar effect is explained in term of modified pseudo phase ion exchange model. Pseudo first order rate constant, k_obs is obtained for each of the nucleophile and for both substrates 1 and 2 at all range of X_AN · k_obs at given [OH^?] and in presence of any substrate is found to increase with the increase of DoTAB,while decrease with the increase of SDS as micellar phases. Critical micelle concentrations (CMCs) in similar trend are observed to increase in DoTAB while decrease in SDS systems by increasing acetonitrile (AN) content. Micellar binding constant (K_S) between any type of given substrate and the formed micelle, is found to decrease in presence of DoTAB and increase in SDS micellar phases by increasing AN content. Finally, the ratios between pseudo first order rate constants for hydrolysis in micellar phase k_M to that in the bulk phase k_w for DoTAB and SDS systems are found to be greater than and smaller than unity respectively at any given X_AN where the data indicated for (1) is always higher than those for (2). The results concluded that micelle DoTAB is working as a catalyst for the reaction rate, while that for SDS is considered as an inhibitor.     

Efficient and Rapid Method for the Oxidation of Electron‐Rich Aromatic Aldehydes to Carboxylic Acids Using Improved Basic Hydrogen Peroxide

An efficient and rapid method for oxidation of electron‐rich aromatic aldehydes to their corresponding carboxylic acids in excellent yields was developed. It is based on the oxidation of methoxy‐substituted benzaldehydes in methanol with an improved aqueous basic hydrogen peroxide system. Benzaldehydes with electron‐withdrawing substituents are oxidized to the corresponding carboxylic acid in excellent yields under mild reaction conditions.     

Clean-up and analysis of carbazole and acridine type polycyclic aromatic nitrogen heterocyclics in complex sample matrices

A HPLC method for the analysis of polycyclic aromatic nitrogen heterocyclics (PANHs) in complex sample matrices is presented. It isolated and separated carbazole and acridine type PANHs with an absolute recovery of between 79–98%. Open column chromatography is used as an initial step to isolate a PANH fraction. By applying normal-phase liquid chromatography using a dimethylaminopropyl silica stationary phase and utilising back-flush technique it was possible to separate the PANH fraction into two fractions containing acridine type and carbazole type PANHs, respectively. The method applied on a sample of solvent refined coal heavy distillate (SRC II HD). A number of 3–5 ring acridines and carbazoles were identified with GC–electron impact MS and quantified with GC–nitrogen–phosphorous detection. Polycyclic aromatic hydrocarbons (PAHs) were determined in the SRC II HD sample by automated on-line clean-up and analysis of the obtained PAH fraction with coupled LC–GC–flame ionization detection. There was no overlap between the PANH and the PAH fractions with this method, and carbazoles and acridines were efficiently separated.     

Copper-catalyzed three-component one-pot synthesis of quinazolines

Two efficient approaches to multi-substituted quinazolines by the three-component one-pot reaction of o-bromo aromatic ketones/aldehydes, ammonia water and aromatic aldehydes, or primary alcohols catalyzed by CuCl have been developed.     

Solitonic waves in polyene dications and principles of charge carrier localization in π‐conjugated organic materials

The quantum‐chemical investigations by ab initio method (restricted Hartree–Fock/6‐31G**) have been performed for a series of unsubstituted, monosubstituted, and disubstituted neutral polyenes and their double charged cations. The waves of charge alternation (characterized by the difference in the electron densities at the nearest carbon atoms or Δq function) and bond length alternation (characterized by the lengths difference of the nearest carbon–carbon bonds or Δl function) are reported. Comparisons are made with the corresponding monocationic polymethine molecules. We found that ionization by two electrons results in formation of two solitonic waves of charge alternation, rather than superposition of two overlapping solitonic waves into one. These waves behave similar to two independent elastic particles, which do not penetrate into each other despite the special confinement by the length of chromophore π‐system. In monosubstituted polyene dication, Δq and Δl functions contain two waves each; however, only one wave is mobile and sensitive to a change of the chemical nature of the terminal group, whereas the second wave remains practically unchanged. The introduction of one oxymethyl or phenyl terminal groups leads to a relatively small shift of the mobile wave from the center to a direction of the terminal group. The effect of the amino or tropilium terminal groups is much more pronounced and leads to a shift of the mobile wave to the end of the molecule. In disubstituted polyene dication, both solitonic waves become mobile and shift symmetrically to both ends. The general principles of the charge localization described in this study may be used in molecular design and fine‐tuning of the charge transport properties in plastic photovoltaics and other organic semiconducting materials. © 2012 Wiley Periodicals, Inc.     

Syntheses and structure characterization of four inorganic–organic hybrid solids based on N-containing aromatic Brønsted bases and chlorometallates

Four organic–inorganic hybrid complexes ([(HL1)₂SnCl₆]?·?2H₂O (1) (L1?=?2-methylquinoline), [(HL2)₂(CdCl₄)]?·?2H₂O (2) (L2?=?5,7-dimethyl-1,8-naphthyridine-2-amine), [(H₂L2)₂SnCl₆]?·?2(Cl) (3), and [(H₂L3)SnCl₆]?·?2H₂O (4) (L3?=?3,6-bis(imidazol-1-yl)pyridazine)) derived from N-containing aromatic Brønsted bases and metal(II) chloride dihydrate (tin(II) chloride dihydrate and cadmium(II) chloride dihydrate) were prepared and characterized by IR, X-ray structure analysis, elemental analysis, and TG analysis. The aromatic rings of the cations in all of the compounds are essentially planar. X-ray diffraction analysis revealed that 2–4 have 3-D network structures built from hydrogen bonds between the cations and chlorometallates. Water molecules also play important roles in structure extension in 1, 2, and 4. The arrangements of the anions and cations in their solid state are dominated by shape, size, and symmetry of the cations and the different structures of the chlorometallates as well as by hydrogen-bond interactions.     

Synthesis of arylidene derivatives of N-unsubstituted pyrrolin-2-ones

5-Alkyl(aryl)-3-arylidene-3H-pyrrolin-2-ones were synthesized by ammonolysis of their O-heteroanalogs or by the reactions of 5-alkyl(aryl)-3H-pyrrolin-2-ones with aromatic aldehydes. The structures of the compounds obtained were confirmed by ¹H NMR spectra.     

高分子覆盖型硅胶填料的制备与色谱保留行为

 采用甲基丙烯酸甲酯 (MMA)或MMA 亚乙基二甲基丙烯酸酯 (EDMA)在硅胶表面聚合的方法 ,制备生成了新型高分子覆盖型硅胶填料C或D。借助红外光谱、元素分析、尺寸排阻色谱和反相液相色谱分析对反应过程、覆盖程度、交联剂的影响和填料的色谱保留行为进行了评价和讨论。结果显示 ,在合成时可以通过控制聚合单体的量控制生成高分子层的厚度 ,而合成中加入交联剂可以改变填料表面的微孔构造。通过考察这种色谱填料的疏水性和对芳香族化合物的分离性能 ,认为其柱效和分离效果接近C18填料的性能。     

Quantitative immunoassay for determining polyaromatic hydrocarbons in electrical insulating oils

The development and application of a combined sample extraction and immunoassay protocol for the quantification of polyaromatic hydrocarbons (PAHs) in transformer oils is reported. Tests were performed on 12 different used transformer oils from three major manufacturers. The removal of matrix interferents was achieved by loading oil fractions onto silica solid phase extraction cartridges and eluting with non-polar solvent prior to evaporation and reconstitution in a more polar medium. Extracts were immunoassayed using two commercially available PAH test kits either having broad specificity towards priority PAHs or enhanced binding specificity toward more carcinogenic PAHs. The total and carcinogenic PAH test kits yielded PAH levels in the oil extracts 5.86-fold and 126-fold lower than the industry-standard IP346 method. The latter method, widely used by the industry, since it correlates with biological carcinogenicity tests, grossly over-estimates PAH levels in oils since it is a non-specific gravimetric solvent extraction approach. The assay was found to be unaffected by the extract sample matrix and was capable of determining PAHs at the nanogram per millilitre level. The assay protocol was simple, low-cost and rapid (<2 h) and equally amenable to operation at remote sites or high-throughput sample screening. The binding specificity of the total anti-PAH antibody was examined by preparing and loading an anti-PAH immunosorbent with oil, prior to solvent displacement of antibody-bound compounds and by gas chromatography (GC)–mass spectrometry (MS) analysis.     

嵌入配位不饱和金属位对多孔芳香骨架材料储氢性能的影响

基于密度泛函理论(DFT)和巨正则蒙特卡洛(GCMC)模拟方法,系统地研究了引入配位不饱和金属位(CUS)对PAF-30n (n = 1–4)材料储氢性能影响的规律。结果表明,77 K下PAF-302MgO₂_PBE100的最大过量质量储氢量达到7.97% (w);77 K、10 MPa下100%醇镁功能化改性PAF-302和PAF-303的绝对储氢量分别达到9.9% (w) (65.9 g∙L^-1)和15.0% (w) (50.5 g∙L^-1),分别超过美国能源部(DOE)标准80% (64.8%)和173% (26.3%),均超过在相同条件下目前储氢性能最佳的NU-1101 (9.1% (w), 46.6 g∙L^-1)。即使在243 K、10 MPa下,其绝对质量和绝对体积储氢量也能分别达到5.13% (w)和34.19 g∙L^-1,占DOE质量与体积储氢标准的93.3%和85.5%,是目前为止常温储氢性能较为均衡的多孔材料之一。结合等量吸附热(Q_st)、径向分布函数(RDF)和质心几率密度分布(MCPD)方法进一步分析,发现有机链长度增加导致孔隙率增加和体积比表面积减小,是引起多孔材料绝对质量和绝对体积储氢量此消彼长的根本原因。另外,引入CUS能提高PAFs材料对H₂分子亲和力,显著增强其体积储氢量。