A new and versatile Ugi/SNAr synthesis of fused 4,5-dihydrotetrazolo[1,5-a]quinoxalines

A combinatorial synthetic route yielding fused tetrazolo[1,5-a]quinoxalines is described. The use of 2-fluorophenylisocyanide in the Ugi-tetrazole reaction (tetrazole-U-4CR) followed by a nucleophilic aromatic substitution (S_NAr) affords the tricylic tetrazolo[1,5-a]quinoxaline moiety in good yields and with high diversity.     

Elution of organic solutes from different polarity sorbents using subcritical water

The intermolecular interactions between organic solutes and sorbent matrices under subcritical water conditions have been investigated at a pressure of 50 bar and temperatures ranging from 50 to 250°C. Both polar and nonpolar organics (chlorophenols, amines, n-alkanes, and polycyclic aromatic hydrocarbons) and five different sorbent matrices (glass beads, alumina, Florisil, silica-bonded C₁₈, and polymeric XAD-4 resins) were used. From the same matrix, the polar solutes always eluted at lower temperatures, while the moderately polar and nonpolar solutes only eluted at higher temperatures. Similar to matrix effects previously observed using supercritical carbon dioxide, the sorbent type greatly influenced the elution efficiency under subcritical water conditions. Lower temperatures are sufficient to elute a particular solute from glass beads, alumina, and Florisil, but higher temperatures (less polar water) are needed to elute the same solute from silica-bonded C₁₈. The highest temperatures were required to elute aromatic organics from XAD-4. These matrix effects demonstrate that, while low temperature water can break inert or dipole interactions between solutes and glass beads, alumina, and Florisil, higher temperature water is required to interrupt the van der Waals attractions between solutes and silica-bonded C₁₈, and even higher temperatures needed to overcome the π-electron interactions between aromatic solutes and XAD-4.     

Fluorescence study of the solubilization of benzo[a]pyrene: application to its detection in coal washing waters

The solubilization of benzo[a]pyrene by organic solvents (dioxane, toluene and dichloromethane) and a surfactant (Triton X-100) was investigated. These media were successfully used for the determination of benzo[a]pyrene using fluorescence detection, with excellent limits of detection and large linear analytical ranges. Benzo[a]pyrene was detected in coal washing waters using liquid chromatography with fluorescence detection. The stability of this compound in dioxane was also examined.     

Preparation and characterization of aliphatic/aromatic copolyesters based on 1,4-cyclohexanedicarboxylic acid

A series of biodegradable aliphatic/aromatic copolyesters, poly(butylene terephthalate)-co-poly(butylene cyclohexanedicarboxylate)-b-poly(ethylene glycol) (PTCG), were prepared by a two-step melt polycondensation method and characterized by means of GPC, FTIR, NMR, DSC, TGA, etc. The effects of aliphatic ester content on the physical, mechanical and thermal properties, as well as in vitro and in vivo degradation behaviors were investigated. The decrease in mechanical strength was observed with an increase in poly(butylene cyclohexanedicarboxylate) (PBC) molar fraction. DSC results showed one melting point and two glass transition temperatures in all samples, and the melting temperature was found to go down gradually as more cyclohexanedicarboxylic acid (CHDA) was added. During the in vitro and in vivo degradation processes, erosion of the surface was dominant as evidenced by scanning electron microscopic observations. The copolyesters containing many CHDA units were featured by the higher water uptake and faster degradation due to much richer amorphous phase within them.     

Comparison of gas chromatography-mass spectrometry and liquid chromatography-mass spectrometry for the determination of fatty and resin acids in paper mill process waters

A comparative study of the performance of liquid chromatography (LC)-atmospheric pressure chemical ionisation (APCI)-mass spectrometry (MS) and gas chromatography (GC)-mass spectrometry techniques for the determination of resin and fatty acids from paper mill process waters was carried out. These compounds are responsible for the high toxicity of paper mill effluents and little research has been carried out regarding their analysis using mass spectrometric techniques. To prove the usability of GC and LC-MS, 16 treated and untreated water samples of recycle, kraft and pulp paper mills were analysed and good agreement was observed as regards to compounds detected and corresponding concentrations. This paper also reports the limits of detection, recoveries, reproducibility, linearity and precision using the two methods. GC-MS presented better selectivity and lower detection limits (below 0.2 microg/l), but derivatization of the extracts and the short life of derivatives (12-24 h) made the technique tedious and prone to high variations. Although LC-APCI-MS presented coelution of the non-aromatic resin acids, it also showed good sensitivity (limits of detection <3 microg/l) and permitted the detection of resin and fatty acids at microg/l level. In addition, since samples could be directly injected to the chromatographic system, LC-APCI-MS was proven as a powerful technique for quick and unequivocal quality control during papermaking.     

A mild, highly selective and remarkably easy procedure for deprotection of aromatic acetates using ammonium acetate as a neutral catalyst in aqueous medium

Ammonium acetate was found to catalyze efficiently the selective deprotection of aromatic acetates in the presence of various sensitive functionalities in aqueous methanol under neutral conditions at room temperature to yield the corresponding phenols in excellent yields. The method has been utilized for deprotection of acetates of several naturally occurring bioactive phenolic compounds and for preparation of venkatasin, a natural coumarino-lignan, from the anticancer compound cleomiscosin A.     

Electron capture detector response to low electron affinity aromatic hydrocarbons using positive ion stabilization and alkyl chloride sensitization

The electron capture detector (ECD) response to numerous aromatic hydrocarbons of low electron affinity (EA) is shown to be detrimentally affected by two processes which compete with and typically overwhelm the electron capture reactions of these molecules. It is shown that the effects of these two undesired reactions can be eliminated by the permanent addition of trimethylamine and one of several alkyl monochlorides to the detector make-up gas. These modifications of the detector gas result in greatly increased sensitivity, increased linearity, and increased reproducibility of response. A kinetic model for the ECD responses of low EA resonance capture molecules is developed which appears to explain these improvements.     

基于氮化碳复合材料磁性固相萃取结合高效液相色谱法测定尿液中3种羟基多环芳烃

建立了测定尿液中3种羟基多环芳烃的氮化碳复合材料磁性固相萃取结合高效液相色谱-荧光检测法。所构筑的磁性氮化碳材料，经扫描电子显微镜、X射线衍射仪、振动样品磁强计和比表面积分析仪表征后，用于尿液中3种羟基多环芳烃的富集净化。考察了吸附剂用量、吸附时间、洗脱溶液和洗脱体积（单次洗脱体积×洗脱次数）对萃取效率的影响。结合高效液相色谱-荧光分析，在0.25~250 μg/L范围内线性关系良好（相关系数r=0.999），3种羟基多环芳烃的检出限和定量限分别为0.08和0.25 μg/L，回收率为90.1%~102%，日内和日间精密度分别为1.5%~7.7%和2.2%~8.7%。该本方法简单、快速、高效，可用于尿液中羟基多环芳烃的分析。     

Catalytic degradation of polystyrene using HUSY catalysts

Summary The addition of carbon dioxide to phenyl glycidyl ether (PGE) was investigated in a semi-batch reactor using immobilized quaternary ammonium chloride catalysts. Five different catalysts were prepared with the following supports : (1) soluble poly(ST-<Emphasis Type=Italic>co</Emphasis>-VBC) [C1], (2) insoluble poly(ST-DVB-VBC) [C2], (3) macroporous poly(ST-DVB-VBC) [C3], (4) poly(ST-<Emphasis Type=Italic>co</Emphasis>-VBC)-MMT [C4] (5) modified MCM-41 [C5]. The addition of carbon dioxide to PGE can be considered as a pseudo-first order process with respect to the concentration of PGE. The pseudo-first order rate constant for the catalysts decreased in the series C1&gt;C3&gt;C2&gt;C4&gt;C5. The activation energy for C1 to C5 catalysts was 8.6, 20.9, 19.9, 23.9, and 26.8 kJ/mol, respectively. The immobilized catalysts can be reused in least 4 successive runs without any considerable loss of their initial reactivities.     

Synthesis and binding studies of new bis-calix[4]arenes containing aromatic and heteroaromatic units

A series of new bis-calix[4]arenes containing different aromatic and heteroaromatic moieties have been synthesized. The complexing behavior of these bis-calix[4]arenes have been studied towards different metal ions and it has been found that these bis-calix[4]arenes bind silver ions selectively over other metal ions. The complexation has been studied by liquid-liquid extraction and by NMR and IR spectroscopy.