The effect of the structure of bonded cyanoalkyl stationary phases on their selectivity in the liquid chromatographic separation of polynuclear aromatic hydrocarbons

Summary The paper discusses the effect of the length and structure of the hydrocarbon chain connecting the nitrile group to the silica gel surface on the chromatographic properties of cyanoalkyl phases.When using non-polar and polar mobile phases, the selectivity of the cyanodecyl phases toward PAHs is higher than of the cyanopropyl phase and of hydroxylated silica gel.Polar additives to the mobile phase drastically decrease the retention on silica gel and on the cyanopropyl phase while affect the properties of cyanodecyl phases only to a considerably less degree. Newly synthesized phases with different structures of the hydrocarbon chain are compared with the commerical cyano-and ODS-phases. The retention mechanism on the cyanoalkyl phases is discussed.     

Anion-pi interactions in cyanuric acids: a combined crystallographic and computational study

Several structures of pi complexes of isocyanuric acid and of several thio derivatives with anions have been computed by using high level ab initio calculations. The nature of the complexes has been studied by means of the method of molecular interaction potential with polarization (MIPp) and Bader's theory of atoms-in-molecules. These molecules form favorable complexes with anions and can be used as binding units for building receptors for the molecular recognition of anions. In several cases, the anion-pi interaction has been demonstrated experimentally by means of X-ray crystallography.     

Influence of silica gel pretreatment and bonding technique on PAH selectivity of octadecyl bonded phases

Summary The effect of silica gel pretreatment and of different bonding techniques, on the chromatographic properties of octadecyl bonded phases is described. The experiments show that a monomeric octadecyl bonded phase, prepared from silica gel that has not been treated before bonding, has a poor selectivity towards polycyclic aromatic hydrocarbons (PAHs) and shows high adsorption of basic components. Silica gel treatment before the bonding of the monofunctional silane does not give a substantial improvement. Polymeric phases on the other hand show a much better PAH selectivity and a lower adsorptivity towards basic components. Further improvement can be achieved with the polymeric modification if silica gel treatment is carried out before bonding.     

X-ray and IR spectroscopic studies of specific intermolecular interactions inN′-substituted isonicotinohydrazides

_N-Thenylidene- andN-(o-nitrobenzylidene)hydrazides of isonicotinic acid have been studied by X-ray structural analysis and IR spectroscopy. In the crystalline state, these molecules are linked through intermolecular N—H ... Np_y hydrogen bonds. Carbonyl groups are not involved in intermolecular hydrogen bonds. However, it was found that the C=O group participates in an attractive interaction with the sulfur atom of the thiophene group. The energy of this interaction is comparable with the energies of intermolecular C=O ... H—N hydrogen bonds in amides.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 896–900, April, 1996.     

NMR studies of interionic interactions in N-methylformamide

The NMR chemical shifts of alkali and thallium(I) salts with various monovalent anions have been measured in N-methylformamide solution. Lithium-7 chemical shifts are virtually concentration and counter-ion independent, presumably due to an absence of direct cation-anion interactions. The sodium-23, potassium-39 and cesium-133 chemical shifts of the salts studied depend on the anion and vary linearly with the concentration. The observed behavior can be accounted for by the formation of collisional ion pairs. On the other hand, the thallium-205 chemical shifts of thallium(I) nitrate and perchlorate were anion-dependent and varied non-linearly with the salt concentration. These results are indicative of contact ion pair formation; formation constants were calculated to be 2.6±0.4 M ^–1 for TlNO ₃ and 1.7±0.5 M ^–1 for TlClO ₄ . The cesium-133 NMR spectra of several mixed electrolyte systems also have been measured in N-methylformamide solution. The¹³³Cs chemical shifts also change linearly with the concentrations of the salts added to 0.10 M CsI/NMF solutions. The influence of the anions on the chemical shifts is the same as that observed for cesium salts alone.     

Fast solid-phase extraction-gas chromatography-mass spectrometry procedure for oil fingerprinting. Application to the Prestige oil spill

A rapid and simple fractionation procedure using solid-phase extraction (SPE) cartridges was developed for an accurate determination of aliphatic and polycyclic aromatic hydrocarbons in petroleum residues and further application in chemical fingerprinting of oil spills by gas chromatography-mass spectrometry (GC-MS). Among the adsorbents evaluated, SiO2/C3-CN exhibited the best selectivity, providing, by elution with n-hexane (4 ml) and n-hexane-CH2Cl2 (1:1) (5 ml), two well-resolved aliphatic and aromatic hydrocarbon fractions, with recoveries of 97 +/- 7.2 and 99.7 +/- 13.9%, respectively. The SPE fractionation procedure was compared with the conventional silica-alumina adsorption chromatography showing similar results but practical advantages in terms of reproducibility, analysis time, solvent reduction and cost. Moreover, is particularly suitable for routine analysis with a high sample throughput. The developed methodology was tested in the characterization of fuel-oil samples collected along the Spanish north-west coast, after the Prestige oil spill accident.     

The Studies of the Heterogeneous Properties of Solid Surfaces by Means of the Derivatograph Q-1500 D

A simple method has been adopted to obtain an important information on the heterogeneous properties of materials studied, adsorbed liquid films and liquid-solid interactions. The method utilizes Q-TG mass loss and the first derivative Q-DTG mass loss curves with respect to temperature and time obtained during programmed liquid thermodesorption in quasi-isothermal conditions. The values of the adsorption capacity, total porosity of material, the value of active centers, desorption energy distribution and mesopore-size distribution functions obtained by this method are in good agreement with those estimated on the basis of independent methods. The theoretical and experimental results provided novel and unique data on the heterogeneity of solid surfaces, properties of liquid adsorbed films and thermal stability of the liquid/solid interfaces. This paper presents the more important results obtained so far in the studies the liquid/solid systems by means of the Paulik's classical and quasi-isothermal techniques. This revised version was published online in July 2006 with corrections to the Cover Date.     

DSC,FT-IR and NIR with Chemometric Assessment Using PCA and HCA for Estimation of the Chemical Stability of Oral Antidiabetic Drug Linagliptin in the Presence of Pharmaceutical Excipients

Pharmaceutical excipients should not interact with active substances, however, in practice, they sometimes do it, affecting the efficacy, stability and safety of drugs. Thus, interactions between active substances and excipients are not desirable. For this reason, two component mixtures of oral antidiabetic drug linagliptin (LINA) with four excipients of different reactivity, i.e., lactose (LAC), mannitol (MAN), magnesium stearate (MGS) and polyvinylpyrrolidone (PVP), were prepared in a solid state. A high temperature and a high humidity of 60 °C and 70% RH, respectively, were applied as stressors in order to accelerate the potential interactions between LINA and excipients. Differential scanning calorimetry (DSC) as well as Fourier transform infrared (FT-IR) and near infrared (NIR) spectroscopy were used to estimate the changes due to potential interactions. In addition, chemometric computation of the data with principal component analysis (PCA) and hierarchical cluster analysis (HCA) was applied to adequately interpret the findings. Of the excipients used in the present experiment, all of them were not inert in relation to LINA. Some of the interactions were shown without any stressing, whereas others were observed under high-temperature/high-humidity conditions. Thus, it could be concluded that selection of appropriate excipients for LINA is very important question to minimize its degradation, especially when new types of formulations with LINA are being developed and manufactured.     

The First Online Capillary Electrophoresis-Microscale Thermophoresis (CE-MST) Method for the Analysis of Dynamic Equilibria—The Determination of the Acidity Constant of Fluorescein Isothiocyanate

This article presents the first successful application of a capillary electrophoresis-microscale thermophoresis tandem technique (CE-MST) for determining the values of equilibrium constant, realized by connecting online the CE and MST instruments using a fused-silica capillary. The acid-base dissociation of fluorescein isothiocyanate, expressed by the acidity constant value (pK_a), was used as a model. The measurement procedure consisted of introducing a mixture containing the analyte and a deliberately added interferent into the CE capillary, electrophoretic separation of the analyte from the interferent, the detection of the analyte with a CE-integrated detector, detection with a MST detector, and then stopping the flow temporarily by turning off the voltage source to conduct the thermophoretic measurement. The analysis of migration times, peak areas and MST responses obtained concurrently for the same sample allowed us to determine the pK_a value using three independent methods integrated within one instrumentation. The analyte was effectively separated from the interferent, and the acidity values turned out to be consistent with each other. An attempt was also made to replace the standard commercial CE instrument with a home-made portable CE setup. As a result, the similar pK_a value was obtained, at the same time proving the possibility of increasing cost efficiency and reducing energy consumption. Overall, the CE-MST technique has a number of limitations, but its unique analytical capabilities may be beneficial for some applications, especially when sample separation is needed prior to the thermophoretic measurement.     

Influence of Multiple Binding Sites on the Supramolecular Assembly of N-[(3-pyridinylamino) Thioxomethyl] Carbamates

In this study, we investigated how the presence of multiple intermolecular interaction sites influences the heteromeric supramolecular assembly of N-[(3-pyridinylamino) thioxomethyl] carbamates with fluoroiodobenzenes. Three targets—R-N-[(3-pyridinylamino) thioxomethyl] carbamate (R = methyl, ethyl, and isobutyl)—were selected and crystallized, resulting in three parent structures, five co-crystals, and one co-crystal solvate. Three hydrogen-bonded parent crystal structures were stabilized by N-H···N hydrogen bonding and assembled into layers that stacked on top of one another. Molecular electrostatic potential surfaces were employed to rank binding sites (Npyr > C=S > C=O) in order to predict the dominant interactions. The N-H⋯H hydrogen bond was replaced by I⋯Npyr in 3/6 cases, I⋯C=S in 4/6 cases, and I⋯O=C in 1 case. Interestingly, the I⋯C=S halogen bond coexisted twice with I⋯Npyr and I⋯O=C. Overall, the MEPs were fairly reliable for predicting co-crystallization outcomes; however, it is crucial to also consider factors such as molecular flexibility. Finally, halogen-bond donors are capable of competing for acceptor sites, even in the presence of strong hydrogen-bond donors.