条带织构装饰技术观察含T─型液晶基元的热致性聚芳酯液晶态的向错

采用条带织构装饰新技术研究了含Ｔ─型液晶基元的热致性聚芳酯液晶态的向错形态．经过培养的液晶样品无需剪切，淬火后便可呈现出围绕向错点取向排列的条带织构，而条带织构长轴的垂直方向正代表了液晶基元的指向矢方向，这样，在普通偏光显微镜下就能直接观察到这些条带织构装饰的强度Ｓ＝±１／２和Ｓ＝±１的向错，并观察到Ｓ＝－３／２的高强度向错和闭环状的反转壁．     

Investigation of parameters affecting the on-line combination of supercritical fluid extraction with capillary gas chromatography

Two different injectors, a split/splitless injector and a programmed temperature vaporizer (PTV) injector were investigated as the interface in on-line supercritical fluid extraction (SFE)-capillary gas chromatography (cGC). The parameters affecting the chromatographic peak shapes as well as the quantitative performance of the interfaces in on-line SFE-cGC were identified and studied. Particular attention was paid to the case where modified extraction fluids were used. Experiments were performed on two different samples. The first sample consisted of PAHs spiked on sand at different concentration levels. The other sample was a polymeric material.     

Coupling of thermal desorption in modified closeable sampling columns with wide-bore capillary gas chromatography and mass spectrometric detection

In contrast to usability of Curie-point pyrolysis at 700°C directly attached to gas chromatography-mass spectrometry (GC-MS) for determination of organic wood preservatives in waste wood samples the investigation method reported here consists of thermal desorption at temperatures about 260°C in connection with GC-MS for peak identification or GC with flame ionization detection for quantitative analyses. So-called “modified closeable sampling columns” are used as batch-reactor in thermal desorption experiments. Desorbed vapours can be introduced on capillary columns without sample discrimination and without a disturbing lost of resolution. In this manner a lot of individual polycyclic aromatic hydrocarbons were determinated in waste wood samples, especially in railway sleepers.     

Determination of polycyclic aromatic hydrocarbons in water samples using high-performance liquid chromatography with amperometric detection

The determination of polycyclic aromatic hydrocarbons (PAHs) using high-performance liquid chromatography (HPLC) with UV and fluorescence detection has been well established. Although most of the PAHs can be detected by these methods, some environmentally important polyaromatic compounds, such as acenaphthylene, do not show fluorescence and can only be determined by UV detection at higher concentrations. A sensitive and selective determination of acenaphthylene, acenaphthene and the six PAHs listed in the TVO, the German drinking water standard, is also possible by amperometric detection following HPLC separation. The method was applied to the determination of PAHs in different water samples after solid-phase extraction (SPE). The efficiency of the amperometric determination was found to be superior to UV detection (λ = 300 nm).     

HPLC post column derivatization of aromatic amines usingN-methyl-9-chloroacridinium triflate

An HPLC post column chemical derivatization procedure based on the interaction between an acridinium triflate and amines to form highly colored derivatives on-line is described for the determination of aromatic amines. Benzocaine and butesin, local anesthetic agents that contain the aromatic amine group, were used as model compounds. Reversed-phase HPLC conditions were developed for both the separation of analytes and the reaction between analytes and the acridinium triflate in the system. Three-dimensional knitted teflon shape coils and the internal diameter and length of the coils were important parameters in reducing band broadening and background noise.N-Methyl-9-chloroacridinium triflate was shown to be applicable to the determination of primary aromatic amines, selected secondary aromatic amines, hydrazides, and hydrazines. Application of the on-line chemical derivatization procedure to the analysis of pharmaceutical dosage forms containing procainamide (primary aromatic amine), isoniazid (hydrazide), and hydralazine (hydrazine) is also described.     

Details of surface features in aromatic polyamide reverse osmosis membranes characterized by scanning electron and atomic force microscopy

In the present article, some new events on the surface morphology of the aromatic polyamide thin‐film‐composite (TFC) membranes were demonstrated in conjunction with their inherent chemical nature. In addition, the detailed, quantitative understanding of the microscopic surface features was shown to be essential in controlling the water permeability and eventually developing the high performance membranes. The surface roughness and the surface area were mainly affected by the existence or nonexistence of the crosslinking and/or the free amide groups not pertinent to the formation of the hydrogen bonding, which in turn contributed to the water permeability. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1429–1440, 1999     

Synthesis and characterization of a series of wholly aromatic copolyesters containing 2‐(α‐phenylisopropyl)hydroquinone moiety

Two series of new wholly aromatic thermotropic copolyesters containing the 2‐(α‐phenylisopropyl)hydroquinone (PIHQ) moiety have been synthesized and their basic properties such as glass transition temperature (T_g), melting temperature (T_m), thermal stability, crystallinity, and liquid crystallinity were studied by differential scanning calorimetry (DSC), thermogravimetry (TG), and wide‐angle X‐ray diffractometry (WAXD) and on a polarizing microscope. The first series was prepared from acetylated PIHQ, terephthalic acid (TPA), and 2,6‐naphthalenedicarboxylic acid (NDA), and the second series from acetylated PIHQ, TPA, and 1,1′‐biphenyl‐4,4′‐dicarboxylic acid (BDA). The T_g values (152–168°C) of the two series are not much different, although the values for the first series appear slightly higher. The T_m values (287–378°C) and the degree of crystallinity of the first series are appreciably greater than those of the second series. Such differences can be explained by the geometric structure of NDA and BDA moieties. All of the present polyesters are thermotropic and nematic. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 881–889, 1999     

混合型烷基键合硅胶液相色谱固定相的合成与性能评价

多环芳烃;取代基位置异构体;混合型烷基键合硅胶液相色谱固定相的合成与性能评价     

高效液相色谱自动分析空气中痕量多环芳烃

痕量分析;高效液相色谱自动分析空气中痕量多环芳烃