羟基多环芳烃的电喷雾电离离子阱串联质谱检测

采用电喷雾电离离子阱串联质谱检测了1-/2-羟基萘、 2-羟基芴、 2-/3-/4-/9-羟基菲、 6-羟基屈和3-羟基苯并[a]芘等9种不同环数的羟基多环芳烃(OH-PAHs, 2~5环), 考察了碰撞诱导解离操作参数活化值Q和相对碰撞能量对羟基多环芳烃各单体碎片离子产率的影响. 通过优化活化值Q和相对碰撞能量, 得到了3-羟基苯并[a]芘的碎片离子, 提高了1-羟基萘、 2-羟基芴、 3-/9-羟基菲和6-羟基屈碎片离子的产率, 并发现活化值Q是电喷雾电离离子阱串联质谱检测不同环数PAHs的关键参数.     

1-4丁炔二醇和乙二胺对离子液体电沉积Cu的影响

研究了1-4丁炔二醇和乙二胺作为添加剂对在离子液体1-甲基-3-甲基咪唑三氟甲磺酸盐中电沉积Cu的影响。紫外可见光吸收光谱结果表明,当采用1-4丁炔二醇作为添加剂时,1-4丁炔二醇吸附在工作电极表面且未与溶液中的Cu²⁺形成配合物。扫描电镜测试结果表明由于1-4丁炔二醇与离子液体的正离子的竞争吸附使得Cu的沉积电势发生正移并使镀层表面更加均匀平整。当采用乙二胺作为添加剂时,紫外可见光吸收光谱和循环伏安测试结果表明乙二胺与溶液中的Cu²⁺离子形成带有正电荷的络合离子使得Cu的沉积电势发生正移,扫描电镜和原子力显微镜测试结果表明得到了更加均匀的镀层。当同时加入1-4丁炔二醇和乙二胺时,Cu的沉积电势仍然发生正移并得到具有纳米粒径的镀层。     

Synthesis and Biological Evaluation of Novel Tetracyclic Benzothiazepines

6-Arylidene-2,3-dimethyl-6,7,8,9-tetrahydro-benzocyclohepten-5-one 2a–l were obtained by the condensation of 2,3-dimethyl/3-methyl benzocyclohepten-5-one 1 with appropriate aromatic aldehydes, and upon condensation with 2-aminothiophenol in ethyl alcohol yielded 1,5-benzothiazepine derivatives 3a–l, respectively. Compounds 3d and 3h were found to possess antimicrobial activity when tested against B. Subtilis. Compounds 3i and 3j were found to possess moderate anti-inflammatory activity. Compound 3b was found to possess comparable antifungal activity when compared to clotrimazole against Trichomonas species.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Sulfonated Condensed Polynuclear Aromatic (S-Copna) Resin Catalyzed Selective Oxidation of Sulfides to Sulfoxides or Sulfones Using Hydrogen Peroxide

Abstract

Sulfonated condensed polynuclear aromatic (S-COPNA) resin was found to be a highly efficient, environmentally friendly, recyclable heterogeneous catalyst for the oxidation of alkyl and aryl sulfides to the corresponding sulfoxides or sulfones, in good yields under mild reaction conditions using 30% hydrogen peroxide as an oxidant.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental resource: Synthesis of the S-COPNA resin catalyst. Spectroscopic data for compounds.     

The Reaction Activity of Aromatic Carbonyl Compounds with Diphenylphosphine Oxide Studied by 31P NMR

Abstract

A series of α-hydroxyphosphine oxides were prepared by the reactions of diphenylphosphine oxide and aromatic carbonyl compounds and characterized by ¹H NMR, ¹³C NMR, ³¹P NMR, FT-IR, ESI-MS, and HR-MS spectra. The reaction rates and experimental conditions of aromatic aldehydes and aromatic ketones were obviously different due to the activity of their carbonyls. The different substituents of the aromatic aldehydes affected the reaction rate too, and the quantitative reactivity of their substituent conformed to the Hammett equation. The results were confirmed by ³¹P NMR spectroscopy.     

Synthesis and Characterization of Poly(ether ether ketone)s with (2,5‐dihydroxy)phenyl Side Group

A new monomer, (2,5‐dimethoxy)phenylhydroquinone (DMPH), was prepared in a two‐step synthetic procedure. One aromatic poly(ether ether ketone)s with 2,5‐dimethoxy phenyl side group (DMP‐PEEK) was synthesized via an aromatic nucleophilic substitution reaction with 4,4′‐difluorobenzophenone (DFB). Poly(ether ether ketone)s with 2,5‐dihydroxy phenyl side group (DHP‐PEEK) was obtained via hydrolysis of methoxy group on the DMP‐PEEK. Both of the high molecular weight polymers could be obtained despite the steric effect of the bulky pendant groups. The two polymers have good solubility at room temperature.     

Polyazomethines Bearing Furan Moieties. Solution Polycondensation of Bis(furanic diamine)s and Aromatic Dialdehydes

A series of new polyazomethines containing furan moieties was synthesized by polycondensation of bifuranic diamine monomers with commercially available aromatic dialdehydes viz., terephthaldehyde (TPA), isophthaldehyde (IPA). Inherent viscosities and number average molecular weights of polyazomethines were in the range 0.90–1.56 dL/g and 10460–17850 (SEC, polystyrene standard), respectively indicating formation of medium to reasonably high molecular weight polymers. The resulting polyazomethines were characterized by solubility tests, viscosity measurements, FTIR, NMR, UV spectroscopy, differential scanning calorimetric (DSC), and thermogravimetric analysis (TGA). These furan-based polyazomethines were essentially amorphous and exhibited glass transition temperatures (Tg) in the 150–190°C range. The temperature at 10% wt loss (T₁₀), determined from TGA of polyazomethines were in the range 300–380°C, indicating their good thermal stability.     

NMR Characterization of Substituted Aromatic Poly (Ether Sulofone)s

Abstract

The synthesis of a variety of substituted bisphenol A polysulfones, including nitro, amino, aminomethyl, ethyl, and methyl derivatives, is described. Nuclear magnetic resonance (NMR) (both proton and carbon, and several 2-D experiments) data confirm conclusions on the substitution site based on arguments on inductive effects in the phenyl rings. The proton ortho to the oxygen in the bisphenol A (BPA) residue is replaced in electrophilic substitution reactions. The degree of substitution was also calculated from the NMR results. The ethyl and methyl derivatives were expected, from the starting reactants, to each have a BPA ring substituted. The NMR data showed that, on the average, this is true. The nitro derivative also has substitution in every BPA ring, while the amino and aminomethyl derivatives have only intermittent BPA rings substituted. Measured degrees of substitution (DS) varied from 0.11 to 2.25.     

Water mediated synthesis of various [1,3]oxazine compounds using alum as a catalyst

Abstract

A simple, efficient, and practical procedure for the synthesis of various substituted 2,3-dihydro-2-phenyl-1H-naphtho[1,2-e][1,3]oxazines and 3,4-dihydro-3-phenyl-2H-naphtho[2,1-e][1,3]oxazines using KAl(SO₄)₂ 12H₂O (alum) as a non-toxic, reusable, inexpensive, and easily available catalyst is described using water as a solvent. These improved reaction conditions allow the preparation of a wide variety of substituted [1,3]oxazines in high yields and purity under mild reaction conditions.