The effect of the structure of bonded cyanoalkyl stationary phases on their selectivity in the liquid chromatographic separation of polynuclear aromatic hydrocarbons

Summary The paper discusses the effect of the length and structure of the hydrocarbon chain connecting the nitrile group to the silica gel surface on the chromatographic properties of cyanoalkyl phases.When using non-polar and polar mobile phases, the selectivity of the cyanodecyl phases toward PAHs is higher than of the cyanopropyl phase and of hydroxylated silica gel.Polar additives to the mobile phase drastically decrease the retention on silica gel and on the cyanopropyl phase while affect the properties of cyanodecyl phases only to a considerably less degree. Newly synthesized phases with different structures of the hydrocarbon chain are compared with the commerical cyano-and ODS-phases. The retention mechanism on the cyanoalkyl phases is discussed.     

Electrokinetic investigations of charged porous membranes

Asymmetric ultrafiltration membranes were prepared from fully aromatic polyamides differing in the diamine monomers of the polymeric backbone and from polysulfone. Nanofiltration membranes were made from polysulfone and polyethersulfone. The polysulfone as well as the polyethersulfone were chemically modified to change the surface charges of the membranes that were made from these polymers. This means neutral, positively as well as negatively charged membranes could be employed for the measurements. The surface properties of the membranes as a function of pH were determined by measuring the streaming potential in a perpendicular and horizontal mode. Applying proteins the values of the streaming potential changed depending on the original charges of the membranes as well as on the pH of the solution. The values shifted to either higher or lower absolute values. Thus, characterization of unused and used membranes can be carried out by electrokinetic measurements. This was also demonstrated using a membrane fitted out with invertase. The zeta potential of nanofiltration membranes, however, was only evaluated from the results obtained with the horizontally run cell.     

Reactions of 2,3-Dioxopyrrolo[2,1-<Emphasis Type="Italic">a</Emphasis>]isoquinolines with Active N-Nucleophiles

It is shown that 2,3-dioxopyrrolo[2,1-a]isoquinolines react readily with aliphatic diamines and hydroxyamine with opening of the dioxopyrrole ring and formation of the corresponding bisenaminoketoamides and hydroxamic acids. Reaction with the thiosemicarbazide and hydrazides of aromatic acids proceeds without opening of the pyrrole ring at the ketone carbonyl. Derivatives of hexahydropyridazine are formed when compounds with carboxyethyl groups at position 1 react with hydrazine. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, 1383–1387, September, 2005.     

Synthesis of arylidene derivatives of N-unsubstituted pyrrolin-2-ones

5-Alkyl(aryl)-3-arylidene-3H-pyrrolin-2-ones were synthesized by ammonolysis of their O-heteroanalogs or by the reactions of 5-alkyl(aryl)-3H-pyrrolin-2-ones with aromatic aldehydes. The structures of the compounds obtained were confirmed by ¹H NMR spectra.     

Oxidation of organic amide ions by dioxygen

The products of base-catalyzed oxidation of secondary aromatic amines were identified by the GC-MS and EPR techniques as nitroxyls, quinone nitrones, quinone imines, and for diarylamines also as the products of C-N bond cleavage-substituted nitrobenzenes, anilines and phenols. It was shown that nitroxyl radicals are the primary paramagnetic products of the reaction and do not form by the interaction of aminyl radicals with dioxygen. A mechanism of the amide ion oxidation through the nonradical addition of dioxygen to the amide ion at the rate-limiting stage is suggested and discussed.The previous report see Ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1746–1751, October, 1994.     

阴离子导向组装：两个具有不同阳离子的多维Ag(I)配合物的晶体结构

Assembly of [Ag（CN）2]^- units with M（Ⅱ）-diamine complex cations [Cu（LN-N）2]^2＋, where LN-N represents L2-diaminopropane （pn） and ethylenediamine （en）, afforded two complexes, [Cu（pn）2][Ag2（CN）4] （1） and [Cu（en）2][Ag3（CN）5] （2）, which were characterized by elemental analysis, IR, UV-Vis and ESR spectra. Single crystal X-ray analyses show that these complexes have 2D and 3D architectures through silver-silver interactions and other weak interactions. The luminescence behaviors of the two complexes were also studied by means of emission spectra.     

Sol-gel approach to in situ creation of high pH-resistant surface-bonded organic-inorganic hybrid zirconia coating for capillary microextraction (in-tube SPME)

A novel zirconia-based hybrid organic-inorganic sol-gel coating was developed for capillary microextraction (CME) (in-tube SPME). High degree of chemical inertness inherent in zirconia makes it very difficult to covalently bind a suitable organic ligand to its surface. In the present work, this problem was addressed from a sol-gel chemistry point of view. Principles of sol-gel chemistry were employed to chemically bind a hydroxy-terminated silicone polymer (polydimethyldiphenylsiloxane, PDMDPS) to a sol-gel zirconia network in the course of its evolution from a highly reactive alkoxide precursor undergoing controlled hydrolytic polycondensation reactions. A fused silica capillary was filled with a properly designed sol solution to allow for the sol-gel reactions to take place within the capillary for a predetermined period of time (typically 15-30 min). In the course of this process, a layer of the evolving hybrid organic-inorganic sol-gel polymer got chemically anchored to the silanol groups on the capillary inner walls via condensation reaction. At the end of this in-capillary residence time, the unbonded part of the sol solution was expelled from the capillary under helium pressure, leaving behind a chemically bonded sol-gel zirconia-PDMDPS coating on the inner walls. Polycyclic aromatic hydrocarbons, ketones, and aldehydes were efficiently extracted and preconcentrated from dilute aqueous samples using sol-gel zirconia-PDMDPS coated capillaries followed by thermal desorption and GC analysis of the extracted solutes. The newly developed sol-gel hybrid zirconia coatings demonstrated excellent pH stability, and retained the extraction characteristics intact even after continuous rinsing with a 0.1 M NaOH solution for 24 h. To our knowledge, this is the first report on the use of a sol-gel zirconia-based hybrid organic-inorganic coating as an extraction medium in solid phase microextraction (SPME).     

Preparation of dibenzofuran-type amorphous polyetherketone by novel etherification reaction

4-Fluorobenzophenone reacted with potassium carbonate in the presence of silica catalyst in diphenyl sulfone solvent to yield 4,4′-dibenzoyldiphenyl ether. This new etherification reaction was extended to three difluoro aromatic ketones. 4,4′-Bis(4-fluorobenzoyl)diphenyl ether ( I ) reacted with potassium carbonate to yield a crystalline poly(oxy-1,4-phenylene-carbonyl-1,4-phenylene) (PEK) and 4,4′-bis{4-[4-(4-fluorobenzoyl)phenoxy]benzoyl}benzene ( II ) gave a crystalline poly(oxy-1,4-phenylene-carbonyl-1,4-phenylene-oxy-1,4-phenylene-carbonyl-1,4-phenylene-oxy-1,4-phenylene-carbonyl-1,4-phenylene-carbonyl-1,4-phenylene)(PEKEKEKK). 2,8-Bis(4-fluorobenzoyl)dibenzofuran ( III ) or 2,8-bis(4-chlorobenzoyl)dibenzofuran ( IV ) reacted with potassium carbonate to yield a poly(oxy-1,4-phenylene-carbonyl-2,8-dibenzofuran-carbonyl-1,4-phenylene) (PEKBK). The PEKBK was a noval amorphous polymer with the glass transition temperature of 222°C and it showed excellent thermal stability [T. Tanabe and I. Fukawa, Jpn. Pat., Kokai 64–74223 (1989)]. Several amorphous dibenzofuran type polyetherketone copolymers were prepared by coplycondensation of III with 4,4′-difluorobenzophenone ( V ) or 1,4-bis(4-fluorobenzoyl)benzene ( VI ) [T. Tanabe and I. Fukawa, Jpn. Pat., Kokai 1153722 (1989)]. © 1992 John Wiley & Sons, Inc.     

Influence of silica gel pretreatment and bonding technique on PAH selectivity of octadecyl bonded phases

Summary The effect of silica gel pretreatment and of different bonding techniques, on the chromatographic properties of octadecyl bonded phases is described. The experiments show that a monomeric octadecyl bonded phase, prepared from silica gel that has not been treated before bonding, has a poor selectivity towards polycyclic aromatic hydrocarbons (PAHs) and shows high adsorption of basic components. Silica gel treatment before the bonding of the monofunctional silane does not give a substantial improvement. Polymeric phases on the other hand show a much better PAH selectivity and a lower adsorptivity towards basic components. Further improvement can be achieved with the polymeric modification if silica gel treatment is carried out before bonding.     

Molecular shape recognition capability of liquid-crystal bonded phases in reversed-phase high performance liquid chromatography

Summary The chromatographic retention behaviour of two liquidcrystal bonded phases have been evaluated using polycyclic aromatic hydrocarbons (PAHs) as the probe samples in reversed-phase high performance liquid chromatography (RP-HPLC). The results clearly indicate that these phases have better planarity and shape recognition capabilities than commercially-avaialble polymeric octadecylsilica (ODS) phases whose strong planarity and shape selectivities were found earlier. It can also be concluded from the chromatographic observations that the shape recognition capability of these phases is dependent on both mobile phase composition and column temperature, but that the effect of mobile phase and temperature on the shape selectivity work independently. The retention behaviour can be explained by changes in the phase structure with changes of eluent composition and temperature.