Comparison of gas chromatography-mass spectrometry and liquid chromatography-mass spectrometry for the determination of fatty and resin acids in paper mill process waters

A comparative study of the performance of liquid chromatography (LC)-atmospheric pressure chemical ionisation (APCI)-mass spectrometry (MS) and gas chromatography (GC)-mass spectrometry techniques for the determination of resin and fatty acids from paper mill process waters was carried out. These compounds are responsible for the high toxicity of paper mill effluents and little research has been carried out regarding their analysis using mass spectrometric techniques. To prove the usability of GC and LC-MS, 16 treated and untreated water samples of recycle, kraft and pulp paper mills were analysed and good agreement was observed as regards to compounds detected and corresponding concentrations. This paper also reports the limits of detection, recoveries, reproducibility, linearity and precision using the two methods. GC-MS presented better selectivity and lower detection limits (below 0.2 microg/l), but derivatization of the extracts and the short life of derivatives (12-24 h) made the technique tedious and prone to high variations. Although LC-APCI-MS presented coelution of the non-aromatic resin acids, it also showed good sensitivity (limits of detection <3 microg/l) and permitted the detection of resin and fatty acids at microg/l level. In addition, since samples could be directly injected to the chromatographic system, LC-APCI-MS was proven as a powerful technique for quick and unequivocal quality control during papermaking.     

Coordination solids via assembly of adaptable components: systematic structural variation in alkaline earth organosulfonate networks

A family of alkaline earth organosulfonate coordination solids is reported. In contrast to more typical crystal engineering approaches, these solids are sustained by the assembly of building blocks that are coordinatively adaptable rather than rigid in their bonding preferences. The ligand, 4,5-dihydroxybenzene-1,3-disulfonate, L, progressively evolves from a 0D, 1D, 2D, to a 3D microporous network with the Group II cations Mg(2+), Ca(2+), Sr(2+), and Ba(2+), (compounds 1-4), respectively. This trend in dimensionality can be explained by considering factors such as hard-soft acid-base principles and cation radii, a rationalization which follows salient crystal engineering principles. The selective gas sorption properties of the microporous 3D network [Ba(L)(H(2)O)].H(2)O, 4, with different gaseous guests are also presented.     

Redox troponization as a novel method for the synthesis of stereoisomeric Eschenmoser's oximes and related non-benzenoid aromatic systems

A novel method for the synthesis of the oxime of 4-methyl-2,4,6-cycloheptatrien-1-one (Eschenmoser's oxime) is proposed. The method involves redox enlargement of the ring of 4-dibromomethyl-4-methyl-2,5-cyclohexadien-1-one oxime through the action of Ni(PPh₃)₄ in DMF (in the presence of Zn). The product is formed as a mixture ofsyn- andanti-forms readily interconverting in solutions. A similar reaction of 4-methyl-4-trichloromethyl-2,5-cyclohexadien-1-one oxime afforded the dimer of agem--centered semiquinoid carbene (1,2-bis-(1-methyl-4-oxyimino-2,5-cyclohexadienyl)-1,2-dichloroethylene), together withsyn- andanti-isomers of 4-chloro-5-methyl-2,4,6-cycloheptatrien-1-one oxime, which are readily separable but also quickly interconverting in solutions. For the latter compounds, the complete¹H NMR assignment of the stereoisomeric structures has been carried out.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 519–523, March, 1995.The authors are grateful to the International Science Foundation (Grant MHW000) as well as the Russian Foundation for Basic Research (Project No. 94-03-08873) for the financial support of the work.     

On-line LC-GC-AED and LC-GC-MS – multidimensional methods for the analysis of PAC in fuels,combustion emissions and atmospheric samples

The composition and concentration of polycyclic aromatic compounds (PAC) in fuels. Theier combustion products and in the atmosphere remains a topic of considerable interest. Despite the wealth of literature on the identification of PAC, speciation at low concentrations remains difficult due to instrument limitation and the complexity of fuel and environmental samples. Consequently on line sample preparation procedures (SPE, SFE, LC, etc.) are becomeing an increasingly important step in the analysis procedure particularly where sample clean-up and fractionation are essential for improving analytical resolution. In this study a normal phase high pressure analytical resolution. In this study a normal phase high pressure liquid chromatography-gas chromatography (LC-GC) system has been developed to provide quantitative analysis of samples, as diverse as coal liquids, petroleum fuels, diesel exhaust particulates, and urban air particulates. Separation and identification of parent and alkylated PAH, hetercycline nitro-and oxy-PAC can be achieved by direct coupling to an atomic emission detector and a bech top mass spectrometer. For both systems the primary LC separation combined with the large sample volume transferred to GC vastly improves detection limits. Furthermore the complimentary nature of the two detectors used enables the positive indentification of many unknowns.     

New developments in the Pd-catalysed cyclisation-coupling reaction of alkene-containing carbonucleophiles with organic halides (and triflates). The first examples of asymmetric catalysis.

The results of our preliminary investigations directed toward asymmetric catalysis of the cyclocarbopalladation of alkenes bearing a proximate nucleophile with organic halides (or triflates) are disclosed. A series of bidentate phosphine ligands were evaluated in intramolecular versions of this reaction using (E)-2-[7-(2-bromophenyl)-hept-4-enyl]-malonic acid dimethyl ester (1) and (Z)-2-[7-(2-trifluoromethanesulfonyloxy-phenyl)-hept-4-enyl]-malonic acid dimethyl ester (9) as model substrates. The highest enantioselective induction was obtained with aryl triflate 9 which produced the corresponding cyclopentylindane as a single diastereomer in 54% chemical yield and 43% ee by using PdCl₂[S-(−)-TolBINAP] as chiral catalyst and K₂CO₃ as base.     

A mild, highly selective and remarkably easy procedure for deprotection of aromatic acetates using ammonium acetate as a neutral catalyst in aqueous medium

Ammonium acetate was found to catalyze efficiently the selective deprotection of aromatic acetates in the presence of various sensitive functionalities in aqueous methanol under neutral conditions at room temperature to yield the corresponding phenols in excellent yields. The method has been utilized for deprotection of acetates of several naturally occurring bioactive phenolic compounds and for preparation of venkatasin, a natural coumarino-lignan, from the anticancer compound cleomiscosin A.     

Bi- and trinuclear oxalamidinate complexes of palladium as catalysts in the copper-free Sonogashira reaction and in the Negishi reaction

The binuclear complex [(acac)Pd(oxam)Pd(acac)] 1 (oxam: tetraphenyl oxalic amidinate) has been prepared from H₂oxam and Pd(acac)₂ in excellent yield. The complex was characterized by elemental analyses, mass spectroscopy, ¹H NMR, ¹³C NMR spectroscopy and in the solid state by X-ray single crystal diffraction analyses. 1 consists of a bimetallic centrosymmetric unit in which the planar oxam ligand acts in a bis-chelating fashion. Each palladium center is in a planar environment.The complex 1 acts as highly selective pre-catalyst in the copper-free Sonogashira reaction between 4-bromoacetophenone and phenylacetylene. Its long-time catalytic activity is higher than that of the related binuclear complex 2 (oxam: tetra-p-tolyl oxalic amidinate) or that of the trinuclear compound [(acac)Pd(oxam)Zn(oxam)Pd(acac)] (3), the solid-state structure of which was also determined by an X-ray structural analysis of single crystals. In addition, 2 is an active and extremely selective pre-catalyst for the Negishi reaction between 3,5,6,8-tetrabromophenanthroline and R-CC-ZnCl (R: Ph, (ⁱprop)₃Si) to form tetra-alkyne-substituted derivatives.     

Structural and spectroscopic trends in mononuclear arylchalcogenolato-palladium(II) and -platinum(II) complexes: Crystal structures of [M(TeAr)2(dppe)] {M = palladium, platinum; Ar = phenyl, 2-thienyl; dppe = 1,2-bis(diphenylphosphino)ethane}

A series of mononuclear [M(EAr)₂(dppe)] [M = Pd, Pt; E = Se, Te; Ar = phenyl, 2-thienyl; dppe = 1,2-bis(diphenylphosphino)ethane] complexes has been prepared in good yields by the reactions of [MCl₂(dppe)] and corresponding ArE⁻ with a special emphasis on the aryltellurolato palladium and -platinum complexes for which the existing structural information is virtually non-existent. The complexes have crystallized in five isomorphic groups: (1) [Pd(SePh)₂(dppe)] and [Pt(SePh)₂(dppe)], (2) [Pd(TePh)₂(dppe)] and [Pt(TePh)₂(dppe)], (3) [Pd(SeTh)₂(dppe)], (4) [Pt(SeTh)₂(dppe)] and [Pd(TeTh)₂(dppe)], and (5) [Pt(TePh)₂(dppe)]. In addition, solvated [Pd(TePh)₂(dppe)] · CH₃OH and [Pd(TeTh)₂(dppe)] · 1/2CH₂Cl₂ could be isolated and structurally characterized. The metal atom in each complex exhibits an approximate square-planar coordination. The Pd-Se, Pt-Se, Pd-Te, and Pt-Te bonds span a range of 2.4350(7)-2.4828(7) Å, 2.442(1)-2.511(1) Å, 2.5871(7)-2.6704(8) Å, and 2.6053(6)-2.6594(9) Å, respectively, and the respective Pd-P and Pt-P bond distances are 2.265(2)-2.295(2) Å and 2.247(2)-2.270(2) Å. The orientation of the arylchalcogenolato ligands with respect to the M(E₂)(P₂) plane has been found to depend on the E-M-E bond angle. The NMR spectroscopic information indicates the formation of only cis-[M(EAr)₂(dppe)] complexes in solution. The trends in the ³¹P, ⁷⁷Se, ¹²⁵Te, and ¹⁹⁵Pt chemical shifts expectedly depend on the nature of metal, chalcogen, and aryl group. Each trend can be considered independently of other factors. The ⁷⁷Se or ¹²⁵Te resonances appear as second-order multiplets in case of palladium and platinum complexes, respectively. Spectral simulation has yielded all relevant coupling constants.     

Synthesis of a novel rigid molecule family for the investigation of electron and energy transfer

Three new rigid bridging ligands for metal complexation (7=bmb, 8=bqb and 11=btb) were prepared from a rigid triptycene spacer connected to two bipyridine ligands using a Horner–Emmons type reaction. The triptycene spacer is substituted by methoxy groups in the case of bmb and in the case of bqb by a benzoquinone substituent. The corresponding metal complexes (ruthenium and/or osmium) were synthesised and the different luminescence behaviour was tested. They show great potential for the investigation of intramolecular electron and energy transfer reactions. The dinuclear metal complex Ru---bqb---Os is an interesting system in which the bridging ligand bqb acts as a redox switch, able to tune the conductivity for energy or electrons across the bridge.     

Electron capture detector response to low electron affinity aromatic hydrocarbons using positive ion stabilization and alkyl chloride sensitization

The electron capture detector (ECD) response to numerous aromatic hydrocarbons of low electron affinity (EA) is shown to be detrimentally affected by two processes which compete with and typically overwhelm the electron capture reactions of these molecules. It is shown that the effects of these two undesired reactions can be eliminated by the permanent addition of trimethylamine and one of several alkyl monochlorides to the detector make-up gas. These modifications of the detector gas result in greatly increased sensitivity, increased linearity, and increased reproducibility of response. A kinetic model for the ECD responses of low EA resonance capture molecules is developed which appears to explain these improvements.