Liquid-liquid-liquid phase microextraction of aromatic amines in water using crown ethers by high-performance liquid chromatography with monolithic column

Liquid-liquid-liquid phase microextraction (LLLME) coupled with high-performance liquid chromatography (HPLC) for the analysis of some aromatic amines is described. These compounds were extracted from 4.0 mL aqueous sample that adjusted to pH 13 with, NaOH-NaCl buffer solution (donor phase, P₁) into an organic phase (P₂) 150 μl benzyl alcohol and ethyl acetate (2:1) and then back extracted into a microdrop of aqueous acceptor phase (P₃), adjusted at pH 2, with Na₂HPO₄-H₃PO₄ buffer solution. The extraction time, T₁ (from P₁ to P₂) was 20 min and T₂ (from P₂ to P₃) was 1 min. Different crown ethers as complexing agents for amines were added to the acceptor phase to improve the extraction time. Factors such as organic solvents, extraction times, and addition of crown ethers to acceptor phase and stirring rate were optimised. The method was applied for determination of aromatic amines in wastewater samples. Enrichment factors ranged from 184.5 to 389.7. The linearity range was from 3 to 1000 ng/ml and the detection limits varied from 0.8 to 1.80 ng/ml. Relative standard deviations (%, n = 5) were found (at S/N 3) in the range of 1.9 to 10.1. All experiments were carried out at room temperature, 22 ± 0.5 °C.     

Excess molar enthalpies for binary liquid mixtures of furfural with some aromatic hydrocarbons

The excess molar enthalpies H _m ^E for the binary mixtures of furfural with the aromatic hydrocarbons namely benzene, toluene, ethylbenzene and o-, m-, and p-xylenes were determined at 35°C. The values for all the mixtures studied are positive over the entire range of composition and follow the order: o-xylene>m-xylene>ethylbenzene>p-xylene>benzene>toluene. The results are discussed in terms of the unlike specific interactions present in the binary mixtures.     

Highly sensitive and selective fluorescence optosensor to detect and quantify benzo[a]pyrene in water samples

We describe here a method for detecting and quantifying the highly carcinogenic polycyclic aromatic hydrocarbon (PAH) benzo[a]pyrene (BaP) in water, based on a flow-trough optical sensor. The technique is fast (response time of 40 s) and simple and at the same time meets the standards of sensitivity and selectivity required by the European Guidelines on Water for Human Consumption. The optosensor is based on the on-line immobilization of BaP on a non-ionic resin (Amberlite XAD-4) solid support in a continuous-flow system. BaP was analyzed in a 15 mM H₂PO₄⁻/HPO₄²⁻ buffer solution with 25% (v/v) 1,4-dioxane at pH 7. Fluorescence intensity was measured at λ_ex/em=392/406 nm. The experimental conditions (reagent phase, pH, type and concentration of buffer solution and organic solvent) and flow-injection values (flow rate and injection volume) were carefully controlled. Under these conditions the optosensor was sensitive to a linear concentration range of between 3.0 and 250.0 ng l⁻¹ with a detection limit of 3.0 ng l⁻¹ and a standard deviation of 1.5% at 150 ng l⁻¹. The optosensor was applied to the quantification of BaP in drinking and waste water samples (95-105% recovery) in presence of the other 15 EPA PAHs at 1000 ng l⁻¹ concentration level. The influence of other fluorescent polycyclic aromatic hydrocarbons and potential interference from ions usually present in water was also evaluated.     

Synthesis of poly (ether-sulfone-amide)s by palladium-catalyzed polycondensation of aromatic dibromides containing ether sulfone structure,aromatic diamines,and carbon monoxide

A general method for the preparation of aromatic poly (ether-sulfone-amide)s has been developed. Polymerization is based on the palladium-catalyzed polycondensation of aromatic dibromides containing ether sulfone structural units, aromatic diamines, and carbon monoxide. Reactions were carried out in N, N-dimethylacetamide (DMAc) in the presence of palladium catalyst, triphenylphosphine, and 1,8-diazabicyclo [5,4,0]–7–undecene (DBU), and gave a series of poly (ether-sulfone-amide)s with inherent viscosities up to 0.86 dL/g under mild conditions. The polymers were quite soluble in strong acids, dipolar aprotic solvents, and pyridine. Thermogravimetry of the polymers showed excellent thermal stability, indicating that 10% weight losses of the polymers were observed in the range above 470°C in air. The glass transition temperatures of the polymers were around 230°C, which are higher than those of poly (ether-sulfone) analogues. These polymers also showed the good tensile strengths and tensile modulus. © 1994 John Wiley & Sons, Inc.     

Molecular dynamics and quantum chemical approaches in the study of the hydration of protonated cyclohexyldiamines

Explicit hydration of the neutral and charged cyclohexylamine and of the cyclohexyldiamine isomers in their mono- or diprotonated forms is investigated through classical molecular dynamics (MD) simulations in aqueous solutions combined with DFT calculations in amine–water complexes. The MD studies performed in the monoamines reveal that the structure of the hydration shell around the neutral amino group (NH₂) is quite distinct from that around the charged one (NH₃⁺). On average, the number of water molecules surrounding the two groups is calculated to be ～2 and 3–4, respectively. The variation of the hydration structure prompted by the groups’ proximity is discussed based on the data found for the mono- and diprotonated diamines. To have a more detailed picture of the water molecules’ arrangement around the amino groups and of the amine–water hydrogen bonds, geometry optimisations in hydrates with up to six water molecules are carried out at the B3LYP/aug-cc-pVDZ level. Complexation energies are also computed. The main findings emerging from these calculations are found to be very helpful to rationalise the mutual influence of the amino groups and therefore to better elucidate the MD findings. The complementary nature of the two research methods is emphasised as an excellent tool in order to closely examine the hydration of polyamines, as exemplified for the cyclohexyldiamines.     

Efficient Synthesis of 3,5,6‐Trisubstituted‐1,2,4‐triazines in the Brønsted Acidic Ionic Liquid, 1‐n‐Butylimidazolium Tetrafluoroborate ([Hbim]BF4)

3,5,6‐Trisubstituted‐1,2,4‐triazines were synthesized in a one‐pot reaction with acid hydrazide, 1,2‐diketone, and ammonium acetate in the Brønsted acidic ionic liquid, 1‐n‐butyl imidazolium tetrafluoroborate ([Hbim]BF₄).     

Methodology for Bioassay-Directed Fractionation Studies of Air Particulate Material and Other Complex Environmental Matrices

Abstract

A normal phase HPLC methodology using a semi-preparative polyaminocyano column in conjunction with a selection of short-term genotoxicity assays has been developed for bioassay-directed fractionation studies of complex environmental mixtures. To illustrate the effectiveness of this methodology, an organic extract prepared from respirable air particulate samples collected in Hamilton, Canada was separated into a non-polar aromatic fraction and a polar aromatic fraction using a combination of alumina and Sephadex LH20 chromatography. These fractions were evaluated for their genotoxic potential using the Salmonella/microsome (Ames) assay with six different strains of Salmonella.

The non-polar aromatic fraction was analyzed by normal phase HPLC and the eluent was collected in one-minute subfractions; these subtractions were bioassayed in three different Salmonella strains (YG1021 -S9, YG1024 -S9 and YG1029 +S9) to afford three different mutation profiles of this sample. Some subfractions which exhibited high mutagenic responses were subjected to further chemical analyses using GC/MS in order to identify those compounds responsible for the genotoxic responses. The nitroarene compounds 2-nitrofluoranthene, 1-nitropyrene and 2-nitropyrene and higher molecular weight polycyclic aromatic hydrocarbons such as benzo[a]pyrene and indeno[l,2,3-cd]pyrene were identified and quantified in some of the biologically active subfractions. The normal phase gradient conditions afforded very reproducible retention times for a series of polycyclic aromatic standards with a broad range of compound polarities. In addition, polycyclic aromatic hydrocarbons (PAH) were observed to elute from the normal phase HPLC column in a series of peaks; successive peaks contained PAH of increasing molecular weight while any individual peak was shown to contain PAH of the same molecular weight.     

In Situ Correlations Between Polycyclic Aromatic Hydrocarbons (PAH) and Pah Metabolizing System Activities in Mussels and Fish in the Mediterranean Sea: Preliminary Results

Abstract

Biochemical indices based on enzymatic activities have been determined in fish and mussels sampled in various different coastal locations in the Mediterranean Sea. Preliminary results show a good agreement between biochemical measurements in marine organisms and chemical analyses of polycyclic aromatic hydrocarbons present in sediments. The results obtained suggest the use of biochemical indices for application in chemical contaminant biomonitoring.