Application of pure silica gel as cation-exchange stationary phase in lon chromatography with indirect photometric detection for common mono-and divalent cations using aromatic monoamines as eluents

Summary A pure silica gel (Pia Seed 5S-60-SIL), synthesized by the hydrolysis of pure tetraethoxysilane [Si(OCH₂CH₃)₄], was applied as a cation-exchange stationary phase in ion chromatography with indirect photometric detection for common mono-and divalent cations (Li⁺, Na⁺, NH₄ ⁺, K⁺, Mg²⁺, and Ca²⁺) using various protonated aromatic monoamines (tyramine [4-(2-aminethyl) phenol], benzylamine, phenylethylamine, 2-methylpyridine and 2,6-dimethylpyridine) as eluet ions. When using 0.75 mM tyramine-0.25 mM oxalic acid-1.5 mM 18-crown-6 (1,4,7,10,13,16-hexaoxacyclooctadecane) at pH 5.0 as the eluent, excellent simultaneous separation and highly sensitive detection at 275 nm for these mono-and divalent cations were achieved on the Pia Seed 5S-60-SIL column (150×4.6 mm I.D.) in 20 min.     

KINETICS OF MESOPHASE FORMATION OF A LYOTROPIC AROMATIC POLYAMIDE

The kinetics of mesophase formation of a lyotropic aromatic polyamide from isotropic state has been studied by means of depolarized light intensity. Avrami type analysis of the data gives an exponent close to 1, which suggests the nucleation followed by one-dimensional growth. No influence of blending flexible chain from nylon 6 to the aromatic polyamide on the kinetics of mesophase formation was observed.     

Analysis of organic pollutants in water at trace levels using fully automated solid-phase extraction coupled to high-performance liquid chromatography

Summary A method has been developed for the determination of trace levels of 32 pesticides, 19 explosives and 16 polycyclic aromatic hydrocarbons (PAH) in water in three individual steps. Solid-phase enrichment (SPE) is coupled to high-performance liquid chromatography (HPLC) with a fully automated system. The organic pollutants are enriched on reusable cartridges packed with adsorbent materials: pesticides and explosives on a mixed bed of divinylbenzene-ethylvinylbenzene copolymers (LiChrolut EN^?) and perfluorinated polyethylene (PolyF^?), and polycyclic aromatic hydrocarbons on C₁₈-modified silica (Zorbax^? ODS1). Thermally assisted desorption (TAD) has been shown to increase the recovery of analytes significantly. As all enriched analytes are transferred to the detector, only fifty millilitres of sample is needed for each single on-line analysis, compared with at least a litre for conventional methods. The separation of the enriched organic analytes is performed on specialized HPLC columns based on reversed-phase materials. The limits of detection of the system employed were found to be below 100 ng L⁻¹. Use of fluorescence detection for the polycyclic aromatic hydrocarbons resulted in limits of detection in the upper pg L⁻¹ range. Thek values, number of theoretical plates, the recovery rates and the limits of detection of this method for fast screening of organic pollutants from three fifty-millilitre aqueous samples are described. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

One-pot synthesis of 2-amino- 5-aryl -5H-thiazolo[4,3-b]-1,3,4-thiadiazoles

Equimolar mixtures of aromatic aldehydes with thioglycolic acid and thiosemicarbazide in H₂SO₄ transform into 2-amino-5-aryl-5H-thiazolo[4,3-b]-1,3,4-thiadiazoles.Translated fromIzvestiya Akademioi Nauk. Seriya Khimicheskaya, No. 3, pp. 763–764, March, 1996.     

Hydrolytically stable, diaminocarboxylic acid-based membranes buffering in the pH range from 6 to 8.5 for isoelectric trapping separations

Diaminocarboxylic acid carrier ampholytes, such as L-histidine, 2,3-diaminopropionic acid, L-ornithine, and L-lysine, were reacted with glycerol-1,3-diglycidyl ether (GDGE) and poly(vinyl alcohol) (PVA) in the presence of sodium hydroxide to produce hydrolytically and mechanically stable hydrogels, supported on a PVA substrate, for use as buffering membranes in isoelectric trapping (IET) separations. The pH values of the DACAPVA membranes were determined with the help of small-molecule pI markers and proteins and were found to be in the 6 < pH < 8.5 range. The membranes were successfully used to isoelectrically trap small ampholytes, desalt ampholyte solutions in IET mode, and effect the binary separation of chicken egg white proteins.     

Heat Capacities of Aqueous Solutions of Acetone; 2,5-Hexanedione; Diethyl Ether; 1,2-Dimethoxyethane; Benzyl Alcohol; and Cyclohexanol at Temperatures to 523 K

The heat capacities of aqueous solutions of acetone, 2,5-hexanedione, diethyl ether, 1,2-dimethoxyethane, benzyl alcohol and cyclohexanol at concentrations of 0.1 to 1.0 mol⋅kg⁻¹ were determined at temperatures of 298.15, 423.15, 473.15 and 523.15 K and pressures up to 28 MPa. The measurements were performed at ambient conditions using the commercial Picker differential flow calorimeter and at high temperatures and pressures with a customized Picker type calorimeter constructed at the Blaise Pascal University, Clermont-Ferrand. Standard molar heat capacities were obtained by weighted extrapolation to the infinite dilution limit. The contributions of –CO–, –O– and –OH groups to the standard molar volume and standard molar heat capacity were determined from the newly determined and literature data. The variation of the three oxygen-containing group contributions with temperature and molecular structure is examined qualitatively.     

Catalytic Enantioselective Reduction of Prochiral Ketones with Chiral Ferrocenyl Amino Alcohols

The asymmetric reduction of prochiral ketones was catalyzed by a class of recoverable and highly stable chiral ferrocenyl amino alcohols derived from natural amino acids to yield optically active secondary alcohols in high chemical yields and moderate to good enantiomeric excesses.     

Simplified procedures for the analysis of polycyclic aromatic hydrocarbons in water, sediments and mussels

We describe in this paper simple and robust analytical protocols to determine the 16 polycyclic aromatic hydrocarbons (PAHs) of the US Environmental Protection Agency priority list in water, sediment and mussels. For water samples, eight different solid-phase extraction (SPE) sorbents have been compared and among them, C18 provided highest recoveries and limits of detection of 0.3-15 ng/L. For lyophilized sediments, Soxhlet and ultrasonic extraction were compared, and the last one permitted to recover all analytes with highest repetitivity and was validated by analysing a certified reference material. Finally, the analysis of mussels was undertaken using Soxhlet, ultrasonic and pressurized liquid extraction (PLE) and the performance of several clean-up steps are compared. Whereas for the former two, incomplete recovery or losses of some analytes were evidenced, PLE permitted a more efficient extraction and although alkaline digestion was necessary to remove coextracted compounds, the method gave acceptable recoveries and limits of detection of 0.5-7.7 microg/kg dry mass, as for sediments. In all cases, analysis was performed by gas chromatography coupled to mass spectrometry and internal standard quantification was performed using five deuterated PAHs. Each method performance is discussed for the three matrices analysed and the paper reports advantages and disadvantages of each for their routine application in monitoring programs.     

Polyterephthalamides with naphthoxy‐pendent groups

A series of new aromatic polyamides having pendent naphthoxy groups were synthesized by the triphenyl phosphite‐activated polycondensation of (2‐naphthoxy)terephthalic acid (NOTPA) with various aromatic diamines in a medium consisting of N‐methyl‐2‐pyrrolidone (NMP), pyridine, and calcium chloride. The diacid monomer NOTPA was prepared from the nitro displacement of dimethyl 2‐nitroterephthalate with the potassium naphthoxide of β‐naphthol, followed by base‐induced ester hydrolysis. All the resulting polymers were noncrystalline and readily soluble in aprotic polar solvents such as NMP and N,N‐dimethylacetamide. Almost all the polymers could be solution‐cast to tough, creasable amorphous films with good mechanical properties, the values of tensile strengths ranging from 90 to 124 MPa with initial moduli ranging from 1.72 to 2.51 GPa. Except for two examples, all the other polyamides displayed discernible glass transitions between 189 and 248 °C in the differential scanning calorimetric traces. These polyamides showed insignificant decomposition below 400 °C in nitrogen or air. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1781–1789, 2002     

Densities and Excess Molar Volumes of Binary and Ternary Mixtures of Aqueous Solutions of 2,2,2-Trifluoroethanol with Acetone and Alcohols at the Temperature of 298.15 K and Pressure of 101 kPa

Excess molar volumes V_m^E of the binary mixtures of (trifluoroethanol + 1-propanol), (trifluoroethanol + 2-propanol), (acetone + water), (methanol + water), (ethanol + water), (1-propanol + water), (2-propanol + water), and the ternary mixtures of (trifluoroethanol + methanol + water), (trifluoroethanol + ethanol + water), (trifluoroethanol~+ 1-propanol + water), (trifluoroethanol + 2-propanol + water) and (trifluoroethanol + acetone + water) were measured with a vibrating tube densimeter at the temperature of 298.15 K and the pressure 101 kPa. The extrema in V_m^E of trifluoroethanol mixtures occur at –0.690 cm³-mol^–1 for (trifluoroethanol + 1-propanol), at –0.990~cm³-mol^–1 for (trifluoroethanol + 2-propanol); at 0.562 and –0.973 cm³-mol^–1 for (trifluoroethanol + methanol + water), at 0.629 and –0.973 cm³-mol^–1 for (trifluoroethanol + ethanol + water), at 1.082 and –0.659 cm³-mol^–1 for (trifluoroethanol~+ 1-propanol + water), at 0.998 and –0.991 cm³-mol^–1 for (trifluoroethanol~+ 2-propanol + water), and at 0.515 and –1.472 cm³-mol^–1 for (trifluoroethanol + acetone + water). The experimental ternary V_m^E values were predicted by empirical expressions using binary solution data.