Application of micro‐solid‐phase extraction for the on‐site extraction of heterocyclic aromatic amines in seawater

An efficient on‐site extraction technique to determine carcinogenic heterocyclic aromatic amines in seawater has been reported. A micro‐solid‐phase extraction device placed inside a portable battery‐operated pump was used for the on‐site extraction of seawater samples. Before on‐site applications, parameters that influence the extraction efficiency (extraction time, type of sorbent materials, suitable desorption solvent, desorption time, and sample volume) were investigated and optimized in the laboratory. The developed method was then used for the on‐site sampling of heterocyclic aromatic amines determination in seawater samples close to distillation plant. Once the on‐site extraction completed, the small extraction device with the analytes was brought back to the laboratory for analysis using high‐performance liquid chromatography with fluorescence detection. Based on the optimized conditions, the calibration curves were linear over the concentration range of 0.05–20 μg/L with correlation coefficients up to 0.996. The limits of detection were 0.004–0.026 μg/L, and the reproducibility values were between 1.3 and 7.5%. To evaluate the extraction efficiency, a comparison was made with conventional solid‐phase extraction and it was applied to various fortified real seawater samples. The average relative recoveries obtained from the spiked seawater samples varied in the range 79.9–95.2%.     

Ionic liquid chemically bonded basalt fibers for in‐tube solid‐phase microextraction

Ionic liquids have been widely used in different fields by advantage of their specific properties. In this work, 1‐methyl‐3‐(3‐trimethoxysilyl propyl)imidazolium chloride was prepared and chemically bonded onto basalt fibers for in‐tube solid‐phase microextraction. Through combining in‐tube extraction device with high‐performance liquid chromatography equipped with a diode array detector, an online enrichment and analysis method for eight polycyclic aromatic hydrocarbons was established under the optimum conditions. A good enrichment factor (52–814), good linearity (0.10–15 and 0.20–15 μg/L), low limits of detection (0.03–0.05 μg/L), and low limits of quantitation (0.10–0.20 μg/L) were achieved using a sample volume of 50 mL. Analysis method was applied to the real samples including the groundwater and wastewater from a chemical industry park, some target analytes were detected and the relative recoveries were in the range of 80.4–116.8%.     

Multidimensional Gas Chromatography–Mass Spectrometry Method for Fingerprinting Polycyclic Aromatic Hydrocarbons and Their Alkyl-Homologs in Crude Oil

The composition of polycyclic aromatic hydrocarbons in crude oil is usually too complex to use standard capillary gas chromatography to separate all of the components. In this study, a multidimensional gas chromatography–mass spectrometry (GC-MS) technique was used to analyze polycyclic aromatic hydrocarbon fractions of crude oil collected from the Dongying oil field in the Bohai Sea. A DB-17MS column (30?m?×?0.25?mm?×?0.25?µm) was used as a prefractionating column and only selected heart-cuts were transferred to the second chromatographic dimension (HP-5MS, 15?m?×?0.25?mm?×?0.25?µm) by a pressure-adjusted continual flow-type switching device for quantification of the polycyclic aromatic hydrocarbons. The chromatographic elements and parameters, such as detector selection and column combinations, were optimized. Naphthalene, phenanthrene, fluorene, dibenzothiophene, chrysene, and their C₁–C₄ alkyl homologs were identified. The profile of the polycyclic aromatic hydrocarbons obtained using the multidimensional GC-MS method was compared with the results obtained by traditional one-dimensional GC-MS.     

Unusual synthesis of azines and their oxidative degradation to carboxylic acid using iodobenzene diacetate

Reaction of 3-hydrazonobutan-2-one oxime with aromatic aldehydes resulted in the formation of 1,2-bis(arylidene)hydrazine commonly referred as azine as an unexpected product, instead of expected product 3-(aryl)methylenehydrazonobutan-2-one oxime, which were subsequently oxidized to corresponding aromatic acids with an ecofriendly oxidizing agent iodobenzene diacetate. Azines and carboxylic acids were characterized by IR and NMR (¹H, ¹³C, HMBC, and HMQC) studies.     

Assessment of amination reactions via nucleophilic aromatic substitution using conventional and eco-friendly energies

The efficiency of conventional heating energy source compared with Infrared (IR), Ultrasound (US), Microwave and the simultaneous combination US–IR eco-friendly approaches for preparation of new N-(5-R¹ _-amino-2-nitrophenyl)acetamides and 5-R¹-amino-2-nitroaniline by Nucleophilic Aromatic Substitution (S_NAr) via addition–elimination reactions on the halogens F, Cl, Br, I, employing amines as nucleophiles were explored. Moreover, phenyldiazenyl derivatives in good yields by an oxidative one-pot S_NAr-based amination reaction from an unusual oxidation of 2-phenylhydrazinyl derivatives in DMSO was prepared.     

层状配位聚合物犤Pb(NCS)_2(bpea)_n的合成,结构和非线性光学性质(bpea=1,2-双(4-吡啶基)乙烷)(英文)

室温下Pb(OAC)2·3H2O,KNCS,和1,2-双(4-吡啶基)乙烷在甲醇中反应生成了八员环支撑的层状配位聚合物犤Pb(NCS)2(bpea)犦n。三阶非线性Z-扫描研究表明该化合物具有非线性折射行为:其非线性吸收系数α2=1.1×10-11m·W-1,非线性折射系数n2=6.055×10-18m2·W-1。     

CsF–Si(OEt)4 catalyzed addition of (hetero)aromatic amides to ethyl acrylate

The conjugate addition of some (hetero)aromatic amides to an α,β‐unsaturated ester (ethyl acrylate) proceeds efficiently in the presence of an equimolar amount of the CsF–Si(OEt)₄ system to afford the corresponding ethyl esters of N‐substituted β‐amino acids. Copyright © 2001 John Wiley & Sons, Ltd.     

Photocrosslinking reaction of vinyl‐functional polyphenylsilsesquioxane sensitized with aromatic bisazide compounds

Photochemical reactions of aromatic azide groups were applied for a novel photosensitive silicone ladder polymer, that is, partially vinyl‐substituted polyphenylsilsesquioxane sensitized with aromatic bisazide compounds as a photocrosslinker. The photocrosslinking reaction in this system was investigated from the viewpoint of the efficiency of the photocrosslinker, that is, the ratio of the photocrosslinker consumed for crosslinking. The numbers of photodecomposed azide groups and crosslinks in the polymer were determined by Fourier transform infrared measurements. At a higher bisazide concentration, the predominant reaction of nitrenes formed as the intermediary radical by the photolysis of azide was a coupling reaction that could not contribute to the gelation of the polymer. The ratio of the bisazide compound consumed for crosslinking showed the highest value at its concentration of 3 wt % and decreased with the addition of a larger amount. The semiempirical molecular orbital calculations were applied to the theoretical analysis of the photoreaction of nitrenes using phenylnitrene as a model structure. The calculation results indicated that the coupling reaction of nitrenes should proceed more easily than the photocrosslinking reaction in N₂ atmosphere, and the fact that the oxidation of nitrenes should proceed exclusively in the atmosphere including O₂ agreed with the experimental results. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4196–4205, 2001     

Synthesis and characterization of fully aromatic thermotropic liquid‐crystalline copolyesters containing m‐hydroxybenzoic acid units

A series of fully aromatic copolyesters based on p‐acetoxybenzoic acid (p‐ABA), hydroquinone diacetate (HQDA), terephthalic acid (TPA), and m‐acetoxybenzoic acid (m‐ABA) were prepared by a modified melt‐polycondensation reaction. The copolyesters were characterized by DSC, thermogravimetric analysis, ¹H NMR, polarized optical microscopy, X‐ray diffraction, and intrinsic viscosity measurements. The copolyesters exhibited nematic liquid‐crystalline phases in a broad temperature range of about 150 °C, when the content of linear (p‐ABA, HQDA, and TPA) units was over 67 mol %. DSC analysis of the anisotropic copolyesters revealed broad endotherms associated with the nematic phases, and the melting or flow temperatures were found to be in the processable region. The flow temperatures and crystal‐to‐nematic and nematic‐to‐isotropic transitions depend on the type of linear monomer units, and these transitions increased as the content of the p‐ABA units increased, as compared to the HQDA/TPA units. When the content of the p‐ABA units increased, as compared to other linear units (HQDA and TPA), the intrinsic viscosity and degree of crystallinity of the copolyesters also increased, implying a higher reactivity for p‐ABA in the p‐ABA/HQDA/TPA/m‐ABA polymer system. The aromatic region in the ¹H NMR spectra of the copolyesters containing equal molar compositions of p‐ABA, HQDA, and TPA units were sensitive to the sequence distribution of aromatic rings. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3263–3277, 2001