Spectral and electrochemical investigation of p-sulfonatocalix[4]arene-stabilized vitamin E aggregation

The host–guest interaction of α-tocopherol (vitamin E) with p-sulfonatocalix[4]arene (p-SC4) in solution state is studied using emission and cyclic voltammetric techniques. The lipid soluble α-tocopherol (α-T) forms a solid complex with p-SC4. FTIR and NMR spectral analysis of the solid complex reveals the tight packing of α-T inside the cavity of p-SC4. The structural deformation is confirmed by XRD analysis. SEM images differentiate the highly porous gel like structure of vitamin E aggregate and the solid structure of the host–guest complex prepared. NOESY spectra confirm the tight penetration of α-T within the hydrophobic cavity of p-SC4.     

Direct Observation of an Oxepin from a Bacterial Cytochrome P450‐Catalyzed Oxidation

The cytochromes P450 are hemoproteins that catalyze a range of oxidative C?H functionalization reactions, including aliphatic and aromatic hydroxylation. These transformations are important in a range of biological contexts, including biosynthesis and xenobiotic biodegradation. Much work has been carried out on the mechanism of aliphatic hydroxylation, implicating hydrogen atom abstraction, but aromatic hydroxylation is postulated to proceed differently. One mechanism invokes as the key intermediate an arene oxide (and/or its oxepin tautomer). Conclusive isolation of this intermediate has remained elusive and, currently, direct formation of phenols from a Meisenheimer intermediate is believed to be favored. We report here the identification of a P450 [P450_cam (CYP101A1) and P450_cin (CYP176A1)]‐generated arene oxide as a product of in vitro oxidation of tert‐butylbenzene. Computations (CBS‐QB3) predict that the arene oxide and oxepin have similar stabilities to other arene oxides/oxepins implicated (but not detected) in P450‐mediated transformations, suggesting that arene oxides can be unstable terminal products of P450‐catalyzed aromatic oxidation that can explain the origin of some observed metabolites.     

A Further Extension of Pnictide Oxide Chemistry – Synthesis and Structure of La2AuP2O

The phosphide oxide La₂AuP₂O was synthesized from lanthanum filings, dried La₂O₃, gold pieces, and ground red phosphorus in the ideal 1.33:0.33:1:2 ratio in an evacuated silica tube at 1473 K. Small single crystals were obtained by recrystallization in a NaCl/KCl flux. The structure was determined on the basis of single‐crystal X‐ray diffractometer data: new type, C2/m, a = 1537.3(3), b = 427.39(8), c = 1009.2(2) pm, β = 131.02(1) °, wR₂ = 0.046, 1102 F² values, 38 variables. La₂AuP₂O contains two striking structural motifs: The oxygen atoms are located in La₄ tetrahedra. The latter are cis‐edge‐shared forming polymeric cationic [La₂O]⁴⁺ chains. These cationic units are separated and charge‐balanced by [AuP₂]^4– polyanions which have monovalent gold in distorted trigonal planar phosphorus coordination. Two crystallographically independent phosphorus sites occur in the polyanion, i.e. isolated P^3– besides dumb‐bells P₂^4– (P2–P2 223 pm). La₂AuP₂O, which crystallizes in the form of ruby red transparent crystals, is an electron precise phosphide oxide (4La³⁺)(2Au⁺)(2P^3–)(P₂^4–)(2O^2–).     

CONFORMATIONAL INVESTIGATION OF SOME SYMMETRICALLY SUBSTITUTED DIALKYL MONO-SULFIDES AND DISULFIDES BY IR SPECTROSCOPY

Abstract

Several infrared and Raman studies have been performed on compounds containing the disulfide group in the region of C-S and S-S stretching modes (1–4) in order to get a better insight of the correlations between molecular conformation and peculiar geometry parameters of the dihedral angle CS-SC.     

Competitive solvent extraction of alkaline earth metals by ionizable nano-baskets of calixarene

The competitive solvent extraction of alkaline earth metals using different nano-baskets was investigated. The novelty of this work is to study the correlations between the isomer structure of calixarenes and their extraction properties. The objective was to quantify the effects of aryl groups in the ionisable pendant moieties, calixarene conformation, steric orientations (cis- and trans-) and relative positions (ortho- and para-) of pendant moieties upon the extraction efficiency, pH_1/2 and the selectivity of calix[4]arene complexes. Alkaline earth metals were extracted from aqueous solutions into chloroform by di-ionisable calix[4]arenes and were measured using ion chromatography. The results revealed that alternation of aryl group in the pendant moieties, changing their orientation from cis- to trans-analogues as well as from ortho- to para- analogues, showed no changes in the selectivity, the extraction efficiency and the pH_1/2 of calix[4]arene complexes. Changing the scaffold of calixarene's ring to the cone, 1,2-alternate and partial-cone conformers altered their complexation ability towards alkaline earth metals and their extraction efficiency.     

Complexation and Transport of Alkali and Alkaline Earth Metal Cations by p-tert-Butyldihomooxacalix[4]arene Tetraketone Derivatives

The binding properties of three p-tert-butyldihomooxacalix[4]arene tetraketone derivatives (tert-butyl 2b, adamantyl 2c and phenyl 2d) in the cone conformation and one derivative (methyl 2a) in a partial cone conformation, towards alkali and alkaline earth metal cations have been established by extraction studies of metal picrates from water into dichloromethane, stability constant measurements in methanol and acetonitrile, and by ¹H NMR spectrometry. Transport experiments of metal picrates through a dichloromethane membrane were also performed. The results are compared to those obtained with closely-related calix[n]arene derivatives (n = 4 and 5) and discussed in terms of the substituents, size and conformational effects. Methylketone 2a is a poor binder for all the cations studied, due to its partial cone conformation. Ketones 2b, 2c and 2d show high extraction and complexation levels for the alkali cations, with similar profiles and preference for K⁺ and Na⁺ (plateau selectivity). Towards alkaline earth cations, these ketones show a strong peak selectivity for Ba²⁺ in extraction, but a plateau selectivity for Ca²⁺, Sr²⁺ and Ba²⁺ in complexation. The nature of the substituent attached to the ketone function has some influence on their binding properties, with phenylketone 2d being a slightly weaker binder than ketones 2b and 2c. ¹H NMR titrations confirm the formation of 1:1 complexes between the ketones and the cations studied, also indicating that they should be located inside the cavity defined by the phenoxy and carbonyl oxygen atoms. Ketones 2b, 2c and 2d show transport rates that do not follow, in general, the same trends observed in extraction and complexation.     

Physicochemical Characterization of Hydrated 4-Sulphonato-Calix[n]arenes: Thermal,Structural, and Sorption Properties

In this study, the thermal behavior of three hydrated water-soluble 4-sulphonato calix[n]arenes was investigated. The melting points, heats of fusion, and heats of solution of the calix[4]arene, calix[6]arene and calix[8]arene were 277, 262, and 270°C; 192, 242 and 351 kJ/mol; and 30, 58 and 63 kJ/mol, respectively. Lower heat of fusion, smaller increase in entropy and smaller heat of solution of the calix[4]arene compared to the calix[6]arene and calix[8]arene showed that less heat was required to break up the crystal lattice of the smaller macromolecule. This apparent anomaly is rationalized in terms of smaller cooperativity of interaction between the molecules of calix[4]arene in the crystal lattice, although the strength of the individual interactions is stronger as evidenced by the higher melting point. TGA analysis indicated that about 17–20% of water was associated with the calix[n]arenes. Both TGA and hot stage microscopy results indicated that upon heating these molecules underwent stepwise water loss. TGA kinetics showed that the 4-sulphonato-calix[8]arene lost water easier than the other two calixarenes. The moisture adsorption behavior of all calixarenes followed type II isotherms. For the same amount of material, the calix[6]arene adsorbed more moisture than the calix[4]arene and the calix[8]arene. Moreover, dehydrated less crystalline 4-sulphonic-calix[n]arenes powders are hydroscopic.

     

A New Phosphonium Calix[4]arene for Selective Anion Recognition: Synthesis and Studies in Solution and in Ion Selective Electrodes

The synthesis and characterization of a new tetra (triphenylphosphonium) p-tert-butylcalix[4]arene 2 is presented. Its interactions with anions were studied by ¹H and ³¹P NMR and UV absorption spectrophotometry, showing the biggest interaction with ClO₄ ^? , I^?  and SCN^? . Anion selectivity in ion-selective PVC-membrane electrodes (ISEs) plasticized with o-NPOE containing ionophore 2 was also investigated. Compound 2 shows a potentiometric response for various anions with the following selectivity pattern: ClO₄ ^?  > SCN^?  > I^?  > Cr₂O₇ ^2 ?  > NO₃ ^?  > Br^?  > Cl^? .     

Synthesis and Characterization of Partially Substituted at Lower Rim Phosphorus Containing Calix(4)arenes

The synthesis and characterization of several new phosphorus-containing partially lower rim substituted derivatives of 5,11,17,23-tetra(t-butyl) calix(4)arene (I) and 5,11,17,23-tetra(t-octyl)calix(4)arene (II), namely 5,11,17,23-tetra(t-butyl)-25,27-dihydroxy-26,28-bis(diphenylphosphinoyl-oxy) calix(4)arene (IV); 5,11,17,23-tetra(t-butyl)-25-hydroxy-26,27,28-tris(tetramethyldiamido-phosphinoyl-oxy) calix(4)arene (Vb); 5,11,17,23-tetra(t-butyl)-25,27-dihydroxy-26,28-bis(dimethyl-phosphinoyl-methoxy) calix(4)arene (VI); 5,11,17,23-tetra (t-octyl)-25,27-dihydroxy-26,28-bis(dimethyl-phosphinoyl-methoxy) calix(4)arene (VII) are reported. The structure of the synthesized calix(4)arene derivatives are identified and confirmed by elemental analysis, IR, ¹H, ¹³C, ³¹P{¹H} NMR spectroscopy and mass spectrometry as and X-ray crystallographic analysis of 5,11,17,23-tetra(t-butyl)-25,27-dihydroxy-26,28-bis(dimethyl-phosphinoyl-methoxy) calix(4)arene VI. According to the NMR spectra, all calix(4)arenes are in cone conformation.     

Regioselective alkylation of the lower rim of p-tert-butylthiacalix[4]arene with N-(p-nitrophenyl)-α-bromoacetamide

The preparation of partially substituted thiacalix[4]arenes 2–6 has been accomplished by conducting the reaction of the thiacalixarene 1 with N-(p-nitrophenyl)-α-bromoacetamide in acetone or acetonitrile in the presence of M₂CO₃ (M = Na, K and Cs). The influence of the reaction conditions (temperature, time, solvent, ratio of the reagents and the nature of the alkali metal carbonate) on regio- and stereoselectivity of this reaction is described.