From superhydrophobic‐ to superhydrophilic‐patterned poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) architectures as a novel platform for biotechnological applications

The manufacture of three‐dimensional patterned electroactive poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) microstructures with tailored architecture, morphology, and wettability is presented. The patterned microstructures are fabricated using a simple, effective, low cost, and reproducible technique based on microfluidic technology. These novel structures can represent innovative platforms for advanced strategies in a wide range of biotechnological applications, including tissue engineering, drug delivery, microfluidic, and sensors and actuators devices. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1802–1810     

Bovine Serum Albumin Loaded Solid Lipid Nanoparticles Prepared by Double Emulsion Method

Solid lipid nanoparticles loaded with bovine serum albumin(BSA) were prepared by a double emulsion method. As the mass fraction of the model drug BSA increased from 0 to 15%, the particle size gradually increased. The physical stability of the nanoparticles was investigated by zeta potential measurement and they were shown to be quite stable. Fluorescence spectroscopy confirmed that the loaded position of BSA was on the interface between the inner aqueous phase and the solid lipid phase. Both Fourier-transf...     

Poly(ethylene terephthalate) copolymers containing 5‐nitroisophthalic units. II. Crystallization studies

The microstructure and crystallization behavior of a set of poly(ethylene terephthalate‐co‐5‐nitroisophthalate) copolymers (PETNI) containing 5‐nitroisophthalic units in the 10–50 mol % range were examined and compared to those of poly(ethylene terephthalate) (PET) and poly(ethylene terephthalate‐co‐isophthalate) (PETI) copolymers. A ¹³C NMR analysis of PETNI copolymers in a trifluoroacetic acid solution indicates that they are random copolymers with average sequence lengths in accordance with ideal polycondensation statistics. Differential scanning calorimetry (DSC) studies show that PETNI containing 5‐nitroisophthalic units up to 20 mol % are able to crystallize and that crystallization takes place in these copolymers at much slower rates than in PET. Wide‐angle X‐ray diffraction from powder and fibers reveals that crystallizable PETNI adopts the same triclinic crystal structure as PET, with the nitroisophthalate units being excluded from crystallites. Fourier transform infrared in combination with cross‐polarization/magic‐angle spinning ¹³C NMR spectroscopy demonstrates the occurrence of a gauche–trans conversion encompassing the crystallization process. A correlation between DSC and spectroscopic data leads us to conclude that the content of trans conformer in the noncrystallized phase of PETNI is higher than in both PET and PETI copolymers and suggests that secondary crystallization in the homopolymer must proceed by a mechanism different than that in copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1553–1564, 2001     

ESR studies in γ‐irradiated and PS‐radiation‐grafted poly(vinylidene fluoride)

The fluoropolymer poly(vinylidene fluoride) was irradiated with γ rays to induce a polystyrene (PS) radiation grafting via an indirect method. Electron spin resonance and Fourier transform infrared studies were performed to identify the species that initiated the PS grafting. Specific experiments were performed to prove separately the importance of each kind of radical. A localization of the radicals in this irradiated polymer is proposed, and a kinetic model of the grafting is given. © 2001 John Wiley & Sons, Inc. J Polym Sci B Part B: Polym Phys 39: 1437–1448, 2001     

The dispersion of pigment slurries via incorporation with water-soluble sulfonate poly(ethylene terephthalate)

A water-soluble sulfonate poly(ethylene terephthalate) copolymer has been synthesized and identified as a high-temperature endurable surfactant. The glass-transition temperature and the storage modulus increase in correlation to the increase in sulfonate content. Various characterization studies were performed, including light scattering, zeta-potential measurement and a sedimentation test. The results suggest that at equal numbers of sulfonate units in a solution, a low concentration of a dispersant of high sulfonate content is more effective than a high concentration of a dispersant of low sulfonate content. Received: 6 April 2000 Accepted: 23 September 2000     

Thermochemistry of Binding of Lead(II) and Cadmium(II) by Saccharides in Aqueous Solution

Solution calorimetry was used to determine enthalpies and stability constants for binding of lead(II) or cadmium(II) by galacturonic acid and several monosaccharides in aqueous solution. New values for enthalpies of solution in water are reported for galacturonic acid and maltose monohydrate. The interaction of water solvent with the reactants is the largest factor in the binding process.     

Analysis of the composition and structure of aqueous media under excitation by lasers and light emitting diodes

We developed a method for detecting traces of foreign components in water and analyzing the microstructure of water. The method is based on studies of the characteristics of secondary emission arising in aqueous media under excitation by radiation of ultraviolet lasers and light emitting diodes. A new type of cuvette (capillary cuvettes) for studying the secondary emission in molecular media was elaborated. The cuvettes enable the study of aqueous solutions at small concentrations of the components; they enable one to recognize the type of molecular compound present in aqueous media, in view of the photoluminescence spectra.     

Stable conformations of 12-crown-O3N and its Li+ complex in aqueous solution

Stable conformations of 12-crown-O3N and its Li complexes in aqueous solution were investigated. To calculate the free energy differences of conformers of 12-crown-O3N and its Li+ complex, our procedure was to make use of two programs, CONFLEX and BOSS. The former generates conformers, and the latter calculates the differences in free energy of solvation between two conformers in aqueous solution. It was confirmed that the present procedure is applicable in solving the question of what is the most stable conformation of 12-crown-O3N in aqueous solution. Results of the calculations suggest that the order of stability for conformers in a vacuum is different from that in aqueous solution. It was also confirmed that the coordination geometry of solvent waters to Li+ changes depending on the distance between the cation and the crown ring.     

The Crystallization of Poly (3-dodecyltbiophene) in an Oriented Solidification Environment

Poly (3-alkylthiophenes) (P3ATs) have made up of a family of conductive polymerswhich are soluble, fusible and processable, since the introduction of flexible alkyl sidechains"'. It is generally accepted that P3ATs can form similar layered structures. inwhich the thiophene rings possess planarity and the side chains act as spacers'-'. Whenthe number. of 'carbon atoms of alkyl side chains is more than 10, some orderlyarrangements will occur for side chains betWeen the' layers'. It has been w…     

Fabrication of nano-structured polythiophene nanoparticles in aqueous dispersion

The synthetic route of unsubstituted polythiophene (PT) nanoparticles was investigated in aqueous dispersion via Fe³⁺-catalyzed oxidative polymerization. With this new synthetic method, high conversion of thiophene monomers was obtained with only a trace of FeCl₃. The dispersion state showed that the PT nanoparticles were well dispersed in many polar solvents, compared to non-polar solvents, such as acetone, chloroform, hexane, and ethyl acetate. To compare the photoluminescence properties between PT nanoparticle dispersion and PT bulk polymers, the PL intensities were measured in the same measuring conditions. Further, core–shell poly(styrene/thiophene) (poly(St/Th)) latex particles were successfully prepared by Fe³⁺-catalyzed oxidative polymerization during emulsifier-free emulsion polymerization. The different polymerization rates of each monomer resulted in core–shell structure of the poly(St/Th) latex particles. The PL data of the only crumpled shells gave evidence that the shell component of core–shell poly(St/Th) latex particles is indeed PT, which was corroborated by SEM data. PL intensity of the core–shell poly(St/Th) nanoparticle dispersion was much higher than that of the PT nanoparticle dispersion, due to its thin shell layer morphology, which was explained by the self-absorption effect.