Electrical conductivity measurements of aqueous sodium chloride solutions to 600°C and 300 MPa

Electrical conductance measurements of dilute (<0.1>^–1) aqueous NaCl solutions were made primarily to quantify the degree of ion association which increases with increasing temperature and decreasing solvent density. These measurements were carried out at temperatures from 100 to 600°C and pressures up to 300 MPa with a modified version of the apparatus used previously in the high temperature study in this laboratory. Particular emphasis was placed on conditions close to the critical temperaturelpressure region of water, i.e., at 5° intervals from 370 to 400°C. The results verify previous findings that the limiting equivalent conductance A_o of NaCl increases linearly with decreasing density from 0.75 to 0.3 g-cm^–1 and also with increasing temperature from 100 to 350°C. Above 350°C. A_o is virtually temperature independent. The logarithm of the molal association constant as calculated exclusively from the data400°C is represented as a function of temperature (Kelvin) and the logarithm of the density of water (g-cm^–3) as follows:

Complexation of aluminate anion by bis-tris in aqueous media at 25–50°C

Gibbsite, Al(OH)₃, solubility studies in aqueous NaCl solutions at pH 9 demonstrate that the aluminate anion forms a strong complex with the neutral Bis-tris molecule 2,2-Bis(hydroxymethyl)-2,2,2-nitrilotriethanol, at low temperatures. The logarithm of the molal concentration quotient for the reaction

Amide-water interactions in cosolvent systems. I. Solubilities and apparent molar volumes of methyl paraben

Solubility and apparent molar volume data are used to demonstrate effects of amide alkylation on amide-water interactions at 25° C. Precise measurements were made of the apparent molar volumes of the amides in binary amide-water mixtures using a dilatometric technique. The results show that the apparent molar volumes of alkyl-substituted amides in water pass through a minimum at an amide concentration which varies inversely with the degree of alkylation. Further studies showed that the solubilities of methyl paraben (methyl-p-hydroxybenzoate) and naphthalene in various amide-water solvent systems increased in characteristic fashion with amide alkylation.     

二钼酸铵晶体饱和水溶液Raman光谱的变异现象及其机理

记录了常温下二钼酸铵晶体饱和水溶液的Raman光谱，并分别与二钼酸铵晶体、仲钼酸铵晶体、仲钼酸铵晶体饱和水溶液、水溶液状态下单钼酸根离子的Raman光谱进行了比较研究。结果表明：二钼酸铵晶体饱和水溶液Raman光谱相对二钼酸铵晶体Raman光谱，明显地发生了变异现象。二钼酸铵晶体饱和水溶液Raman光谱其主要特征峰最高振动频率937.6 cm^-1与仲钼酸铵晶体饱和水溶液Raman光谱主要特征峰最高振动频率937.6 cm^-1完全吻合，而其次高振动频率893.9 cm^-1，恰好介于水溶液中单钼酸根离子Raman光谱主要特征峰最高振动频率895.1 cm^-1与仲钼酸铵晶体饱和水溶液Raman光谱主要特征次高峰振动频率891.0 cm^-1之间，而且三者彼此接近。二钼酸铵晶体饱和水溶液Raman光谱主、次特征峰强度之比值为2.1，与仲钼酸铵晶体饱和水溶液Raman光谱主、次特征峰强度之比值4.4相比，一半不足。提出了一种利用Raman光谱主要特征峰振动频率及其主、次特征峰强度之比值对二钼酸铵晶体饱和水溶液组分同时进行定性和半定量分析的新方法。发现了常温下二钼酸铵晶体饱和水溶液中二钼酸根离子Mo₂O₇^2-已经不复存在，完全转变成了优势组分仲钼酸根离子Mo₇O₂₄^6-和次要组分单钼酸根离子MoO₄^2-；证明了常温下含钼水溶液酸化过程中溶液Raman光谱离散性变化现象的存在。运用结构化学和物理化学原理同时讨论了二钼酸铵晶体饱和水溶液Raman光谱发生变异现象的机理。     

Synthesis and electrochemical properties of spinel LiMn2O4 prepared by the rheological phase method

Pure-phase and well-crystallized spinel LiMn₂O₄ powders were successfully synthesized by a simple rheological phase method. The thermal behavior and structure properties of the powders prepared by the rheological phase method compared with the solid-state reaction were investigated by thermogravimetry, powder X-ray diffraction , scanning electron microscopy and transmission electron microscopy. According to the results of the electrochemical tests, it is obvious that the sample resulting from the rheological phase method shows higher discharge capacity and better cycling stability than one formed in the solid-state reaction. The cyclic voltammogram and columbic efficiency curves also confirm that the product by the rheological phase method has a good cycling performance due to its fine cubic spinel structure and morphology.     

Continuous pH monitoring during pretreatment of yellow poplar wood sawdust by pressure cooking in water

Yellow poplar wood sawdust consists of 41% cellulose and 19% hemicellulose. The goal of pressure cooking this material in water is to hydrate the more chemically resistive regions of cellulose in order to enhance enzymatic conversion to glucose. Pretreatment can generate organic acids through acid-catalyzed degradation of monosaccharides formed because of acids released from the biomass material or the inherent acidity of the water at temperatures above 160°C. The resulting acids will further promote the acid-catalyzed degradation of monomers that cause both a reduction in the yield and the formation of fermentation inhibitors such as hydroxymethyl furfural and furfural. A continuous pH-monitoring system was developed to help characterize the trends in pH during pretreatment and to assist in the development of a base (2.0 M KOH) addition profile to help keep the pH within a specified range in order to reduce any catalytic degradation and the formation of any monosac-charide degradation products during pretreatment. The results of this work are discussed.     

On the apparent molar volumes of nonelectrolytes in water

Apparent molar volumes of aqueous solutions of argon and xenon have been calculated using a previously developed comprehensive equation of state for nonelectrolyte systems. The equation consists of a virial expansion truncated after the fourth virial coefficient and a closed-form term approximating higher coefficients. Mixing rules are based on the composition dependence of virial coefficients, which is known from statistical mechanics. The equation accurately represents vapor-liquid and gas-gas equilibria for the Ar+H₂O and Xe+H₂O systems over wide ranges of pressure and temperature using two binary parameters. With the binary parameters determined from phase equilibrium data, the equation accurately predicts apparent molar volumes V in the near-critical and far-from-critical regions. Apart from reproducing experimental V data, the equation reveals remarkable maxima of V as a function of pressure and temperature in the near-critical region. The implications of this equation with respect to the Ar–H₂O potential are discussed via the second virial coefficient.     

水介质中α,α-双(4-羟基香豆素-3-基)甲苯的洁净合成

在水介质中三乙基苄基氯化铵(TEBA)存在下, 芳醛与4-羟基香豆素反应为α,α-双(4-羟基香豆素-3-基)甲苯提供了一种快速、方便、高效和洁净的合成方法.     

氯化钠对锂离子电池石墨负极的修饰改性

Numerous carbonaceous materials have been studied as anodes of lithium ion batteries during the past several years[1￣4].Graphite was favored for battery applications because it exhibits a high specific capac- ity, low working potential close to that of l…     

Ion Association and Hydration in Aqueous Solutions of Nickel(II) and Cobalt(II) Sulfate

Aqueous solutions of nickel(II) and cobalt(II) sulfate have been investigated at 25 ^∘C by dielectric relaxation spectroscopy (DRS) over a wide range of frequencies (0.2 ≤ ν (GHz) ≤ 89) and salt concentrations (0.025 ≤ c(mol-L⁻¹) ≤ 1.4). The spectra indicate, as for MgSO₄(aq) studied previously, the simultaneous presence of double solvent-separated, solvent-shared and contact ion pairs in both NiSO₄(aq) and CoSO₄(aq). The stepwise formation constants for each ion-pair type and the overall association constant, obtained from the data are in good agreement with ultrasonic relaxation and other estimates. The DR spectra at higher concentrations (c ≥ 0.5 mol-L⁻¹) suggest the existence of a nonlinear triple ion M₂SO₄²⁺(aq). Consistent with the very strong hydration of the salts, which have ‘effective’ hydration numbers approaching 27 at infinite dilution, there are no significant differences in any of the relaxation or thermodynamic parameters for NiSO₄(aq) and CoSO₄(aq), except that the triple ion appears to be somewhat more stable for the latter.