基于数据驱动的卫星锂离子电池寿命预测方法

锂离子电池由于具有工作电压高、体积小、质量轻、比能量高、寿命长和自放电率小等优点,成为 替代传统镍氢、镍镉电池的第三代航天器用储能电源。寿命预测是锂离子电池健康管理的重要方面,是掌 握电源衰退的重要手段。锂离子电池剩余使用寿命预测问题已成为电子系统健康管理领域的研究热点和具 有挑战性的问题之一。本文基于NASA埃姆斯中心的锂离子电池地面试验采集数据,首先分析了3种类型 的锂离子电池预测方法,之后重点研究了几种有效的数据驱动的锂离子电池寿命预测方法,并对各种预测 方法的效果进行了评价。实验结果表明,本文提出的方法能够有效的用于基于数据驱动的锂离子电池寿命 预测中,具有较强的工程应用价值。     

手机锂电池充放电过程的研究

利用COBRA3实验设备测试了锂电池待机充放电过程的电压、电流、锂电池电容量及充电量的变化情况。提出通过实时测量锂电池电压值,可精确换算出锂电池的剩余容量的方法。手机待机充电所需时间和关机充电所需时间基本一致。     

Influence of the Type of a Ligand on the Intensity of Luminescence of Ln3+ Ions in Aqueous Solutions

The luminescence characteristics of hydrated Ln³⁺ ions and their complexes with some acidic ligands have been investigated. The possibility of determining the stability of the complexes of lanthanides in solutions from the intensity of luminescence bands is shown. The influence of the characteristic features of the f-electron shell of Ln³⁺ on the formation of the spectrochemical series is discussed.     

纯Cr2O3包覆Li4Ti5O12微球的制备及其储锂性能研究

The pure Cr₂O₃ coated Li₄Ti₅O₁₂ microspheres were prepared by a facile and cheap solutionbased method with basic chromium(III) nitrate solution (pH=11.9). And their Li-storage properties were investigated as anode materials for lithium rechargeable batteries. The pure Cr₂O₃ works as an adhesive interface to strengthen the connections between Li₄Ti₅O₁₂ particles, providing more electric conduction channels, and reduce the inter-particle resistance. Moreover, LixCr₂O₃, formed by the lithiation of Cr₂O₃, can further stabilize Li₇Ti₅O₁₂ with high electric conductivity on the surface of particles. While in the acid chromium solution (pH=3.2) modification, besides Cr₂O₃, Li₂CrO₄ and TiO₂ phases were also found in the final product. Li₂CrO₄ is toxic and the presence of TiO₂ is not welcome to improve the electrochemical performance of Li₄Ti₅O₁₂ microspheres. The reversible capacity of 1% Cr₂O₃-coated sample with the basic chromium solution modification was 180 mAh/g at 0.1 C, and 134 mAh/g at 10 C. Moreover, it was even as high as 127 mAh/g at 5 C after 600 cycles. At-20℃, its reversible specific capacity was still as high as 118 mAh/g.     

Electrochemical characterization of LiCoO2 as rechargeable electrode in aqueous LiNO3 electrolyte

The development of lithium ion aqueous batteries is getting renewed interest due to their safety and low cost. We have demonstrated that the layer-structure LiCoO₂ phase, the most commonly used electrode material in organic systems, can be successful delithiated and lithiated again in a water-based electrolyte at currents up to 2.70 A/g. The capacity is about 100 mAh/g at 0.135 A/g and can be tuned by cycling the electrode in different potential ranges. In fact, increasing the high cut-off voltage leads to higher specific capacity (up to 135 mAh/g) but the Coulomb efficiency is reduced (from 99.9% to 98.5%). The very good electrode kinetic is probably due to the high conductivity of the electrolyte solution (0.17 Scm^− 1 at 25 °C) but this behavior is affected by the electrode load.     

Electrochemical properties of thin TiO2 electrode on Li1 + xAlxGe2 − x(PO4)3 solid electrolyte

A fabrication of all-solid-state thin-film rechargeable lithium ion batteries by sol-gel method is expected to achieve both the simplification and cost reduction for fabrication process. TiO₂ thin film electrode was prepared by PVP (polyvinylpyrrolidone) sol-gel method combined with spin-coating on Li_1 + xAl_xGe_2 − x(PO₄)₃ (LAGP) solid electrolyte which has wide electrochemical window. The thin film was composed of anatase TiO₂ that is the most active phase for Li insertion and extraction and contacted well with LAGP substrate. In the cyclic voltammogram, a redox couple was observed at 1.8 V vs. Li/Li⁺ assigned to Li insertion/extraction into/from anatase TiO₂, indicating that the thin film worked as electrode for lithium battery. The charge and discharge test in various charge and discharge rates revealed that the discharge process (delithiation) is thought to be faster than charge process (lithiation). It is attested that the sol-gel process, which derives both simplification and cost reduction for fabrication process, can be applied to thin film battery using LAGP solid electrolyte.     

Studies on poly(vinylidene fluoride-co-hexafluoropropylene) based gel electrolyte nanocomposite for sodium-sulfur batteries

Experimental investigations on a sodium ion conducting gel polymer electrolyte nanocomposite based on poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP), dispersed with silica nanoparticles are reported. The gel nanocomposites have been obtained in the form of dimensionally stable, transparent and free-standing thick films. Physical characterization by X-ray diffraction (XRD), Fourier transform Infra-red (FTIR) spectroscopy and Scanning electron microscopy (SEM) have been performed to study the structural changes and the ion-filler-polymer interactions due to the dispersion of SiO₂ nanoparticles in gel electrolytes. The highest ionic conductivity of the electrolyte has been observed to be 4.1 × 10⁻³ S cm^− 1 at room temperature with ~ 3 wt.% of SiO₂ particles. The temperature dependence of the ionic conductivity has been found to be consistent with Vogel-Tammen-Fulcher (VTF) relationship in the temperature range from 40 to 70 °C. The sodium ion conduction in the gel electrolyte film is confirmed from the cyclic voltammetry, impedance analysis and transport number measurements. The value of sodium ion transport number (t_Na+) of the gel electrolyte is significantly enhanced to a maximum value of 0.52 on the 15 wt.% SiO₂ dispersion. The physical and electrochemical analyses indicate the suitability of the gel electrolyte films in the sodium batteries. A prototype sodium-sulfur battery, fabricated using optimized gel electrolyte, offers the first discharge capacity of ~165 mAh g^− 1 of sulfur.     

新型聚合物固体电解质的红外光谱研究

采用微波热交联技术制备出了多孔状的聚偏氟乙烯 /聚甲基丙烯酸甲酯 (PVDF PMMA)共混的聚合物固体电解质薄膜材料 ,电性能测试表明该固体电解质薄膜在室温下的电导率可达到 2 0 5× 10 - 3S·cm- 1 ,并具有良好的机械性能。用红外光谱对该膜进行了分析 ,结果表明在聚合物固态电解质中的PVDF ,PMMA ,LiClO4 和γ 丁内指 (BL)之间并不是简单的混合 ,而是存在着某种相互作用 ,并且这种作用只有在生成聚合物固态电解质时 ,才明显地得到了加强。     

全原子分子动力学模拟结合核磁共振波谱研究N-甘氨酰甘氨酸水溶液的结构和弱相互作用

采用分子动力学模拟方法结合核磁共振化学位移系统研究了甘氨酰甘氨酸水溶液体系饱和溶解度范围的弱相互作用. 径向分布函数表明体系中不同类型的原子显示出形成氢键的不同能力. 氢键网络分析发现了不同氢键所能形成的分子簇结构. 随温度变化核磁共振化学位移值用于研究形成氢键的变化情况,并和模拟得到的结果进行比较,模拟和实验结果得到了较好的吻合.     

Three‐dimensional imaging of chemical phase transformations at the nanoscale with full‐field transmission X‐ray microscopy

The ability to probe morphology and phase distribution in complex systems at multiple length scales unravels the interplay of nano‐ and micrometer‐scale factors at the origin of macroscopic behavior. While different electron‐ and X‐ray‐based imaging techniques can be combined with spectroscopy at high resolutions, owing to experimental time limitations the resulting fields of view are too small to be representative of a composite sample. Here a new X‐ray imaging set‐up is proposed, combining full‐field transmission X‐ray microscopy (TXM) with X‐ray absorption near‐edge structure (XANES) spectroscopy to follow two‐dimensional and three‐dimensional morphological and chemical changes in large volumes at high resolution (tens of nanometers). TXM XANES imaging offers chemical speciation at the nanoscale in thick samples (>20 µm) with minimal preparation requirements. Further, its high throughput allows the analysis of large areas (up to millimeters) in minutes to a few hours. Proof of concept is provided using battery electrodes, although its versatility will lead to impact in a number of diverse research fields.