Group contributions to the thermodynamic properties of non-ionic organic solutes in dilute aqueous solution

The thermodynamic properties G _h ^o,H _h ^o, and C _p,h ^oassociated with the transfer of non-ionic organic compounds from gas to dilute aqueous solution and the limiting partial molar properties C _p ^o ,2 and V₂ ² of these compounds in water are described through a simple scheme of group contributions. A distinction is made between groups made only of carbon and hydrogen, and functional groups i.e. groups containing at least one atom different from carbon and hydrogen. Each group is assigned a contribution, for each property, through a least squares procedure which utilizes only molecules containing at most one functional group. Finally, for compounds containing more than one functional group, correction parameters are evaluated as the differences between the experimental values and those calculated by means of the group contributions. The different behavior of hydrophilic compared with hydrophobic groups is discussed for the various properties. A rationale for the correction parameters, i.e. for the effects of the interactions among hydrophilic groups on the thermodynamic properties, is attempted.     

The hydrophobic effect in aqueous solutions of nonelectrolytes. I. Self-interactions of alkylureas

In order to clarify some aspects of the hydrophobic interactions, the enthalpies of dilution of monoethylurea, 1,3-dimethylurea, and 1,3-diethylurea have been determined calorimetrically at 25°C. The calorimetric data, expressed in terms of excess enthalpy, permit the evaluation of the pair and triplet interaction coefficients. The analyses of these and of the analogous coefficientsg _xx andg _xxx, derived from osmotic data, indicate a driving force favorable to the interactions among the hydrated solute molecules. Nevertheless, the positive values of theh _xx andh _xxx coefficients seem to suggest that the source of the effect is a rearrangement of the water molecules rather than a direct association of the solute molecules. There are evidences of a strict correlation between the enthalpic and the entropic effects. Preliminary data were presented at the International Conferences on Chemical Thermodynamics at Baden (1973) and Montpellier (1975). The experimental part was carried out at the Istituto Chimico of the University of Trieste. To whom correspondence should be addressed.     

Determination of Aqueous Nickel-Carbonate and Nickel-Oxalate Complexation Constants

An ion-exchange method was used to determine complexation constants for the Ni-oxalate and Ni-carbonate systems in a NaClO₄ background electrolyte. The Ni-oxalate data were interpreted in terms of a single Niox(aq) complex having log K ₁ values for Ni²⁺ + ox^2– Niox(aq) of 3.9 ± 0.1 (I.S. = 0.5 mol-L^–1 p[H] = 7.1) and 4.4 ± 0.1 (I.S. = 0.1 mol-L^–1 p[H] = 8.6) at 22 ± 1C. Specific ion-interaction theory (SIT) was used to obtain log K ₁ = 5.17 ± 0.05 (95% confidence level and = –0.23 ± 0.15) at I.S. = 0. The Ni-carbonate studies were carried out at p[H] values of 7.5, 8.5, and 9.6 in 0.5 mol-L^–1 NaClO₄/NaHCO₃ solutions. The NiCO₃(aq) species was the dominant complex in the [CO₃ ^2–] concentration ranges studied at all three p[H] values. A log K ₁ value for Ni²⁺ + CO₃ ^2– NiCO₃(aq) of 2.9 ± 0.3 was deduced at I.S. = 0.5 mol-L^–1. Extrapolating this value to zero ionic strength using the SIT approach yielded log K ₁ = 4.2 ± 0.3 (95% confidence level and = –0.26 ± 0.04). The data allowed upper bound values for the complexation constants for NiHCO₃ ⁺ and Ni(CO₃)₂ ^2– to be estimated, i.e., log K < 1.4 for Ni²⁺ + HCO₃ ^– NiHCO₃ ⁺, and log K ₂ < 2 for NiCO₃(aq) + CO₃ ^2– Ni(CO₃)₂ ^2–, respectively.     

Glass capillary columns for separation of free organic acids

Glass capillary columns have been prepared without acidic additive in the stationary phase, from which free organic acids elute as sharp and symmetrical peaks. The required surface in the borosilicate glass capillary was generated by a combination of leaching with aqueous HCl and deposition of colloidal silica particles; it can be coated with stationary phases have a broad range of polarity. Aqueous samples containing free organic acids can also be analyzed in such columns in an isothermal mode.     

Development of calixarene-based host molecules for peptides in aqueous media

We synthesized a peptidocalix[4]arene library consisting of 1000 members that was suitable for peptide recognition in aqueous media. Some peptidocalix[4]arenes in the library were host molecules for guest peptides. Electrostatic interaction between the host and guest molecules was the most important factor for binding in aqueous media.     

Atom transfer radical polymerization of 1-phenoxycarbonyl ethyl methacrylate monomer

Atom transfer radical polymerization conditions with copper(I) bromide/2,2^′-bipyridine (Cu/2,2^′-bpy) as the catalyst system were employed for the homopolymerization and random copolymerization of 1-phenoxycarbonyl ethyl methacrylate (PCMA) with methyl methacrylate (MMA). Temperature studies indicated that the polymerizations occurred smoothly in bulk at 110 °C. Poly(PCMA)(polydispersity index=1.27) homopolymer was characterized and then used as macroinitiator for increasing its molecular weight. The homopolymerization of PCMA was also carried out under free radical conditions using 2,2^′-azobisisobutyronitrile as an initiator.The monomer and polymers were characterized by FT-IR and ¹H and ¹³C-NMR techniques. The glass transition temperatures, the solubility parameters and average-molecular weights of the polymers were determined. Thermal stabilities of the polymers were given as compared with each other by using TGA curves. Thermal degradation products of poly(PCMA)s obtained by ATRP and free radical polymerization were compared with each other by using ¹H-NMR technique.     

ATRP grafting of styrene from benzyl chloride functionalized polysiloxanes: An AFM and TGA study of the Cu(0)/bpy catalyst

Various combinations of Cu(0), CuCl, 2,2′-bipyridine (bpy) and 1,10-phenanthroline (phen) were used as catalysts for the grafting polymerizations of styrene from polysiloxane macroinitiators functionalized with benzyl chloride. While Cu(0)/bpy alone promotes the grafting, narrower polydispersities were obtained in the presence of CuCl. Analysis of the Cu(0) surface before and after polymerization by a combination of AFM, TGA and FTIR investigations reveals the formation of bpy or phen films on Cu(0). In the presence of CuCl, the ligand film appears decorated with CuCl particles which increase in size with increasing the CuCl concentration. The initial layer occurs most likely as a result of complexation between the ligands and the Cu(0) surface and acts as a support for the rest of the film. These observations are consistent with the film formation on Cu(0) from related nitrogen donors and indicate that the reactivity of the Cu surface may depend not only on its prior treatment but also on the deposition of ligands from the reaction mixture.     

Synthesis of graft copolymer of ethyl cellulose through living polymerization and its self-assembly

Copolymers of ethyl cellulose (EC) with polystyrene (PSt) were synthesized through atom transfer radical polymerization (ATRP). The molecular weight of graft copolymers increased without any trace of the EC macro-initiator, and the polydispersity of the side chains was low. The molecular weight of the side chains increased with the monomer conversion. Kinetic study indicated that the polymerization was first order. The micelle characteristics of the graft copolymer in acetone were investigated using dynamic light scattering (DLS), atom force microscopy (AFM) and transmission electron microscopy (TEM). With increasing the concentration, micelles were gradually formed from the solution. The TEM and AFM images indicated that the micelles had spherical shape and showed core-shell structure.     

Enantioselective Oxidation of Sulfides Catalyzed by Chiral MoV and CuII Complexes of Catechol-Appended β-Cyclodextrin Derivatives in Water

The two modified β-cyclodextrin (β-CD) derivatives having catechol-type ligand (2,3- and 3,4-dihydroxy groups on the benzoate ring) were synthesized. The chiral catalytic activity of their Mo^V and Cu^II complexes was examined in the asymmetric oxidation of aromatic sulfides using hydrogen peroxide in water (pH 6.0). The oxidation with the Mo^V complexes of two β-CD derivatives were more accelerated than that with the Cu^II complexes. The sign of the optical rotation of the sulfoxides obtained in the above two cases showed the opposite configuration in the oxidation of the same sulfide. The difference of the enantioselectivity appeared also between the two complexes of the 2,3- and 3,4-dihydroxybenzoate derivatives with the same metal ion. While the use of the Mo^V complexes with the catechol derivatives yielded the sulfoxides with 35–65% ee, the use of the Cu^II complexes gave the products with the␣opposite configuration at 26–52% ee. The chiral induction in the oxidation, observed conversely between the␣catalysts, was reflected on the chiral conformation of the respective metal catalysts, showed in Induced Circular Dichroism (ICD) spectra. The highest optical yield, 65%, was observed in the oxidation of butyl phenyl sulfide using the catalytic amount (0.1 equiv) of the Mo^V complex with mono-6-O-(3,4-dihydroxybenzoyl)-β-CD. The reaction gave predominantly the (S)-sulfoxide in 95% chemical yield.     

Investigation on the Interaction of Bendazac with β-, Hydroxypropyl-β-, and γ-, yclodextrins

The interactions of Bendazac, a topical non-steroidal anti-inflammatory drug, with-cyclodextrin, hydroxypropyl--cyclodextrin and -cyclodextrinwere investigated to evaluate possibilities to improve the drug's poor water solubilityand eventually to enhance the topical delivery of Bendazac. Phase solubility studiesdemonstrated the ability of the selected cyclodextrins to complex with Bendazac andincrease drug solubility. The amount of solubilized Bendazac increased linearly withthe addition of each cyclodextrin according toA_L type plots. ¹³C-NMR studiesshowed that the Bendazac A-ring was included in the cavity of the three cyclodextrins.The -cyclodextrin was also able to include the B-ring of Bendazac, forminga complex where one drug molecule fitted into two cyclodextrin molecules. Equimolarsolid systems of the drug with each cyclodextrin carrier were prepared using varioustechniques (physical mixing, spray-drying and freeze-drying). The results of differential scanning calorimetry and Fourier transform infrared analysis, performed on the solid systems, demonstrated that freeze-dried and spray-dried products had a high degree of amorphization and agreed with the hypothesis of the existence of drug–cyclodextrin interaction in the solid state. The cyclodextrins tested were able to improve the dissolution of Bendazac. The dissolution profile of the drug was also affected by the physico-chemical properties of each solid system, the freeze-dried products being the most rapidly dissolving forms.