纳米氧化镱对熔融石英析晶动力学机制的影响

本文研究引入纳米氧化镱对熔融石英析晶机制及动力学过程的影响.通过X射线衍射仪(XRD)测试结果分析了纳米氧化镱的引入对熔融石英陶瓷析晶率的影响,采用动力学方法分析了纳米氧化镱的引入对熔融石英陶瓷析晶机制的影响,同时探讨了其等温析晶动力学过程.研究表明,熔融石英陶瓷的晶粒向二维兼有一维及三维的方式生长,引入纳米氧化镱的熔...     

Dielectric Properties Investigation of Metal–Insulator–Metal (MIM) Capacitors

This study presents the construction and dielectric properties investigation of atomic-layer-deposition Al₂O₃/TiO₂/HfO₂ dielectric-film-based metal–insulator–metal (MIM) capacitors. The influence of the dielectric layer material and thickness on the performance of MIM capacitors are also systematically investigated. The morphology and surface roughness of dielectric films for different materials and thicknesses are analyzed via atomic force microscopy (AFM). Among them, the 25 nm Al₂O₃-based dielectric capacitor exhibits superior comprehensive electrical performance, including a high capacitance density of 7.89 fF·µm⁻², desirable breakdown voltage and leakage current of about 12 V and 1.4 × 10⁻¹⁰ A·cm⁻², and quadratic voltage coefficient of 303.6 ppm·V⁻². Simultaneously, the fabricated capacitor indicates desirable stability in terms of frequency and bias voltage (at 1 MHz), with the corresponding slight capacitance density variation of about 0.52 fF·µm⁻² and 0.25 fF·µm⁻². Furthermore, the mechanism of the variation in capacitance density and leakage current might be attributed to the Poole–Frenkel emission and charge-trapping effect of the high-k materials. All these results indicate potential applications in integrated passive devices.     

Precise Quantification of Molybdate In Vitro by the FRET-Based Nanosensor ‘MolyProbe’

Molybdenum (Mo) is an essential trace element in all kingdoms of life. Mo is bioavailable as the oxyanion molybdate and gains biological activity in eukaryotes when bound to molybdopterin, forming the molybdenum cofactor. The imbalance of molybdate homeostasis results in growth deficiencies or toxic symptoms within plants, fungi and animals. Recently, fluorescence resonance energy transfer (FRET) methods have emerged, monitoring cellular and subcellular molybdate distribution dynamics using a genetically encoded molybdate-specific FRET nanosensor, named MolyProbe. Here, we show that the MolyProbe system is a fast and reliable in vitro assay for quantitative molybdate determination. We added a Strep-TagII affinity tag to the MolyProbe protein for quick and easy purification. This MolyProbe is highly stable, resistant to freezing and can be stored for several weeks at 4 °C. Furthermore, the molybdate sensitivity of the assay peaked at low nM levels. Additionally, The MolyProbe was applied in vitro for quantitative molybdate determination in cell extracts of the plant Arabidopsis thaliana, the fungus Neurospora crassa and the yeast Saccharomyces cerevisiae. Our results show the functionality of the Arabidopsis thaliana molybdate transporter MOT1.1 and indicate that FRET-based molybdate detection is an excellent tool for measuring bioavailable Mo.     

陶瓷材料疏水性能的研究进展

本文简述了疏水性表面的基本原理,分别从低表面能物质修饰和表面微细粗糙结构的构建两个方面,对疏水性陶瓷材料的制备技术和最新的成果进行了总结,介绍了其潜在的应用并对未来的研究方向作了展望.     

Paramagnetic Properties and Moderately RapidConformational Dynamics in the Cobalt(II) Calix[4]arene Complex by NMR

¹H NMR measurements are reported for the CD₂Cl₂/CDCl₃ solutions of the Co(II) calix[4]arenetetraphosphineoxide complex (I). Temperature dependences of the ¹H NMR spectra of I have been analyzed using the line shape analysis, taking into account the temperature variation of paramagnetic chemical shifts, within the frame of the dynamic NMR method. Conformational dynamics of the 2:1 Co(II) calix[4]arene complexes was conditioned by the pinched cone ↔pinched cone interconversion of I (with activation Gibbs energy ΔG^≠(298K) = 40 ± 3 kJ/mol. Due to substantial temperature dependence of paramagnetic shifts, complex I can be used as model compound for designing an NMR thermosensor reagent for local temperature monitoring.     

Numerical Study on Entropy Generation of the Multi-Stage Centrifugal Pump

The energy loss of the multi-stage centrifugal pump was investigated by numerical analysis using the entropy generation method with the RNG k-ε turbulence model. Entropy generation due to time-averaged motion and velocity fluctuation was mainly considered. It was found that the entropy generation of guide vanes and impellers account for 71.2% and 23.3% of the total entropy generation under the designed flow condition. The guide vanes are the main hydraulic loss domains and their entropy generation is about 9 W/K, followed by impellers. There are vortices at the tongue of the guide vane inlet as well as flow separations in the impellers, which lead to entropy generation. The fluid impacts the outer surface of the guide vanes, resulting in the increase in entropy generation. There are refluxes near the guide vane tongues which also increase the entropy generation of this part. The entropy generation distribution of the guide vanes and impellers was investigated, which found that the positive guide vane has more entropy generation compared with the reverse guide. The entropy generation of the blade suction surface is higher compared with the pressure surface. This study indicated that the entropy generation method has distinct advantages in the assessment of hydraulic loss.     

光阴极注入器型能量回收射频加速器

光阴极注入器型能量回收射频加速器（PERL）是新一代加速器,在高平均功率自由电子激光和下一代高亮度光源等研究中有很好的应用前景。分析了PERL的强流与高平均功率特性,对注入器输出束流品质的要求及光阴极注入器、超导加速腔等关键技术进行了研究,设计分析了一种特殊结构的高压DC Gun光阴极注入器,能有效地提高DC加速腔中的加速场强,当高压为1MV和加速场达到10MV/m时,产生的电子束流能够基本满足PERL应用要求。同一超导加速段中的束流加速和能量回收的数值模拟计算结果表明,能获得高效率电子束流能量回收效果。     

水合硼酸锶的制备及脱水热分解动力学

以氯化锶和硼酸氢铵为原料,采用液相沉淀法制备了片状水合硼酸锶（SrB6O10•5H2O）粉体,并用XRD、FT-IR及SEM进行了表征。利用热重分析法对片状纳米硼酸锶粉体的脱水热分解动力学进行了研究,分别采用 Coats- Redfern 方程和 Flynn-Wall-Ozawa（FWO）法对热重分析数据进行了处理和拟合,初步确定了水合硼酸锶的四步脱水过程及相应的热分解反应机理,得到各步反应的表观活化能和指前因子。     

Ein Vergleich zwischen radioaktiver Markierung und Indikator-Aktivierungsanalyse bei der Messung von Verweilzeitspektren

An VK-Z-Rohren zur Herstellung von Polyamid wurden Verweilzeitspektren mit der Methode der radioaktiven Markierung und der Methode der Indikatoraktivierungsanalyse gemessen. Die nach den beiden Methoden ermittelten Verweilzeitspektren werden miteinander verglichen. Die Übereinstimmung der Verweilzeitspektren wird durch Gegenüberstellung der statistischen Momente und durch einen Test nach Kolmogoroff-Smirnov geprüft. Es wird der experimentelle Aufwand beider Verfahren diskutiert und eine Fehlerabschätzung durchgeführt.     

Autoradiographische Untersuchungen zur Vermisechung von Baustoffkomponenten

Die Feinverteilung des Kalkes im Kalk-Quarzsand-Gemisch ist eine notwendige Bedingung fur hohe erreichbare Festigkeit der Silikatbaustoffe. Vergleiehende Untersuchungen über die Kalkverteilung an neutronenaktivierten feinkörnigen Baustoffproben mit Hilfe von Szintillationsmessungen des ⁴⁷Ca-Gehaltes und mittels autoradiographischer Darstellung der Kalkverteilung in kleinen Prüfkörpern unter Ausnützung der relativ weichen β-Strahlung des ⁴⁵Ca ergaben, daβ die autoradiographischen Aussagen über die Homogenität der Proben am besten mit den Festigkeitsiwerten der Prüfkörper korrespondieren.