Simultaneous determination of inorganic arsenic,antimony, selenium and tellurium by ICP-MS in environmental waters using SPE preconcentration on modified silica

This paper deals with a simplified multi-element profiling of inorganic arsenic, antimony, selenium and tellurium in the form of ⁷⁵As, ⁸²Se, ¹²¹Sb and ¹²⁵Te by ICP-MS for amounts less than 10?µg?L^?1. Internal standards such as ⁷²Ge and ²⁰⁹Bi were successfully used for the suppression of both influence of macro elements Na⁺, K⁺, Ca²⁺, Mg²⁺ or Al³⁺, and interference of limited concentrations of heavy metal ions. Modified silica sorbents Separon? SGX C18, C8, CN, NH₂, RPS and Phenyl were tested for the preconcentration of As, Sb, Se and Te (0.25–5?µg?L^?1) in the form of ion associates with cationic surfactants from 50–250?mL sample volume. 1-etoxycarbonyl-pentadecyltrimethylammonium bromide (Septonex®, 0.005?mol?L^?1) was suitable for this purpose in the presence of 4-(2-pyridylazo) resorcinol, 2-pyrrolidinecarbodithioate and 8-hydroxyquinoline-5-sulphonic acid. The quantitative retention occurred at pH 7?±?0.2 and the mixture of acetone with ethanol in ratio 1?:?1 in the presence of 0.1?mol?L^?1 HCl was used for the quantitative elution. Organic solvents and the excess of acid were removed by evaporation prior to the determination by ICP-MS. The determination of the above trace metalloids in various kinds of water with enrichment factor till 50 times on silica Separon? SGX C18 and the above reagents were compared with the standard addition method.     

Anodic stripping voltammetry of antimony at unmodified carbon electrodes

Antimony is an element of significant environmental concern, yet has been neglected relative to other heavy metals in electroanalysis. As such very little research has been reported on the electroanalytical determination of antimony at unmodified carbon electrodes. In this paper we report the electrochemical determination of Sb(III) in HCl solutions using unmodified carbon substrates, with focus on non-classical carbon materials namely edge plane pyrolytic graphite (EPPG), boron doped diamond (BDD) and screen-printed electrodes (SPE). Using differential pulse anodic stripping voltammetry, EPPG was found to give a considerably greater response towards antimony than other unmodified carbon electrodes, allowing highly linear ranges in nanomolar concentrations and a detection limit of 3.9?nM in 0.25?M HCl. Furthermore, the sensitivity of the response from EPPG was 100 times greater than for glassy carbon (GC). Unmodified GC gave a comparable response to previous results using the bare substrate, and BDD gave an improved, yet still very high limit of detection of 320?nM compared to previous analysis using an iridium oxide modified BDD electrode. SPEs gave a very poor response to antimony, even at high concentrations, observing no linearity from standard additions, as well as a major interference from the ink intrinsic to the working electrode carbon material. Owing to its superior performance relative to other carbon electrodes, the EPPG electrode was subjected to further analytical testing with antimony. The response of the electrode for a 40?nM concentration of Sb(III) was reproducible with a mean peak current of 1.07?µA and variation of 8.4% (n?=?8). The effect of metals copper, bismuth and arsenic were investigated at the electrode, as they are common interferences for stripping analysis of antimony.     

有机杂化锑基主族异金属硫属化物的研究进展

本文综述了有机杂化锑基主族异金属硫属化物的研究进展,对它们的结构和异金属次级结构基元进行了描述、归类和总结;探讨了有机组分分别作为结构导向剂和配体两种角色所起到的不同作用;介绍了这类化合物在离子交换、光催化性能方面的研究;展望了该体系的发展趋势。     

有机杂化锑基主族异金属硫属化物的研究进展

本文综述了有机杂化锑基主族异金属硫属化物的研究进展, 对它们的结构和异金属次级结构基元进行了描述、归类和总结;探讨了有机组分分别作为结构导向剂和配体两种角色所起到的不同作用;介绍了这类化合物在离子交换、光催化性能方面的研究;展望了该体系的发展趋势。     

Reaction with SO3 in Ionic Liquids: The Example of K2(S2O7)­(H2SO4)

The ionic liquid 1‐butyl‐3‐methylimidazolium hydrogensulfate, [bmim]HSO₄, turned out to be resistant even to strong oxidizers like SO₃. Thus, it should be a suitable solvent for the preparation of polysulfates at low temperatures. As a proof of principle we here present the synthesis and crystal structure of K₂(S₂O₇)(H₂SO₄), which has been obtained from the reaction of K₂SO₄ and SO₃ in [bmim]HSO₄. In the crystal structure of K₂(S₂O₇)(H₂SO₄) (orthorhombic, Pbca, Z = 8, a = 810.64(2) pm, b = 1047.90(2) pm, c = 2328.86(6) pm, V = 1978.30(8) ų) two crystallographically unique potassium cations are coordinated by a different number of monodentate and bidentate‐chelating disulfate anions as well as by sulfuric acid molecules. The crystal structure consists of alternating layers of [K₂(S₂O₇)] slabs and H₂SO₄ molecules. Hydrogen bonds between hydrogen atoms of sulfuric acid molecules and oxygen atoms of the neighboring disulfate anions are observed.     

The electrochemical evaluation of antipsychotic drug (promethazine) in biological and environmental samples through samarium cobalt oxide nanoparticles

In this work, we developed a perovskite structured samarium cobalt oxide nanoparticles (SmCoO₃ NPs) with the aid of the co-precipitation method. The rare earth metal (Sm) and cobalt oxide combined to form a perovskite lattice structure. One-pot route synthesized SmCoO₃ NPs were scrutinized successfully through various physicochemical techniques. Concerning its effective thermal stability and electrical properties, the synthesized SmCoO₃ NPs have been effectively implemented in the electrochemical evaluation of promethazine hydrochloride (PHY) using cyclic voltammetry. The electrochemical detection of PHY was performed through SmCoO₃ NPs-modified glassy carbon electrode (GCE) and unmodified GCE. The electron transfer kinetics, effect of scan rate, the influence of pH, electroactive surface area, selectivity, and sensitivity have been studied. The electron charge transfer rate (R_ct) and electrolyte resistance (R_s) were calculated to be 105.59 (Ω) and 150 (Ω) in the ferricyanide probe, indicating great facilitation of the electron transfer between PHY and SmCoO₃ NPs deposited on the electrode surface. Further, the optimized SmCoO₃-modified GCE exemplifies excellent selectivity, storage stability, reproducibility, repeatability, detection limit (5 nM), sensitivity (0.594 μA μM^?1 cm^?2), and wide consecutive linear ranges, respectively. Besides, the proposed method has been effectively employed for the detection of PHY in the various real samples which reveals good recoveries of 95.40–99.17%.     

Triphenylantimony(V) Catecholates of the Type (3-RS-4,6-DBCat)SbPh3-Catechol Thioether Derivatives: Structure,Electrochemical Properties,and Antiradical Activity

A new series of triphenylantimony(V) 3-alkylthio/arylthio-substituted 4,6-di-tert-butylcatecholates of the type (3-RS-4,6-DBCat)SbPh₃, where R = n-butyl (1), n-hexyl (2), n-octyl (3), cyclopentyl (4), cyclohexyl (5), benzyl (6), phenyl (7), and naphthyl-2 (8), were synthesized from the corresponding catechol thioethers and Ph₃SbBr₂ in the presence of a base. The crystal structures of 1, 2, 3, and 5 were determined by single-crystal X-ray analysis. The coordination polyhedron of 1–3 is better described as a tetragonal pyramid with a different degree of distortion, while that for 5- was a distorted trigonal bipyramid (τ = 0.014, 0.177, 0.26, 0.56, respectively). Complexes demonstrated different crystal packing of molecules. The electrochemical oxidation of the complexes involved the catecholate group as well as the thioether linker. The introduction of a thioether fragment into the aromatic ring of catechol ligand led to a shift in the potential of the “catechol/o-semiquinone” redox transition to the anodic region, which indicated the electron-withdrawing nature of the RS group. The radical scavenging activity of the complexes was determined in the reaction with DPPH radical.     

Binary Metal Oxide Adsorbed Graphene Modified Glassy Carbon Electrode for Detection of Riboflavin

Tungsten oxide (W) decorated titanium oxide (T) adsorbed onto a graphene (Gr) and modified the glassy carbon electrode for the electrochemical quantification of riboflavin (RF) in edible food and pharmaceuticals. For comparison, nanocomposites are formed using graphene oxide (GO), reduced graphene oxide (rGO) and pure graphite (G) sheets to study the electrochemical activities towards riboflavin. The ternary WTGr modified GCE shows the highest electrocatalytic activity due to synergetic interactions between the metal oxide and graphene. The electrochemical observations are supported by the SEM, HRTEM, XRD, UV-Vis, Zeta potential (ζ) and size data. The sensor shows a wide linear range 20 nM–2.5 μM with a detection limit 25.24 nM and sensitivity (4.249×10⁻⁸ A/nM). The fabricated sensor is validated in real samples.     

Phosphine-Stabilized Pnictinidenes

The reaction of the intramolecular germylene-phosphine Lewis pair (o-PPh₂)C₆H₄GeAr* ( 1 ) with Group 15 element trichlorides ECl₃ (E=P, As, Sb) was investigated. After oxidative addition, the resulting compounds (o-PPh₂)C₆H₄(Ar*)Ge(Cl)ECl₂ ( 2 : E=P, 3 : E=As, 4 : E=Sb) were reduced by using sodium metal or LiHBEt₃. The molecular structures of the phosphine-stabilized phosphinidene (o-PPh₂)C₆H₄(Ar*)Ge(Cl)P ( 5 ), arsinidene (o-PPh₂)C₆H₄(Ar*)Ge(Cl)As ( 6 ) and stibinidene (o-PPh₂)C₆H₄(Ar*)Ge(Cl)Sb ( 7 ) are presented; they feature a two-coordinate low-valent Group 15 element. After chloride abstraction, a cyclic germaphosphene [(o-PPh₂)C₆H₄(Ar*)GeP] [B(C₆H₃(CF₃)₂)₄] ( 8 ) was isolated. The ³¹P NMR data of the germaphosphene were compared with literature examples and analyzed by quantum chemical calculations. The phosphinidene was treated with [iBu₂AlH]₂, and the product of an Al−H addition to the low-valent phosphorus atom (o-PPh₂)C₆H₄(Ar*)Ge(H)P(H)Al(C₄H₉)₂ ( 9 ) was characterized.     

A Strategy for the Preparation of Thioantimonates Based on the Concept of Weak Acids and Corresponding Strong Bases

By following a new synthetic approach, which is based on the in situ formation of a basic medium by the reaction between the strong base Sb(V)S₄^3? and the weak acid H₂O, it was possible to prepare three layered thioantimonate(III) compounds of composition [TM(2,2′‐bipyridine)₃][Sb₆S₁₀] (TM=Ni, Fe) and [Ni(4,4′‐dimethyl‐2,2′‐bipyridine)₃][Sb₆S₁₀] under hydrothermal conditions featuring two different thioantimonate(III) network topologies. The antimony source, Na₃SbS₄ ? 9 H₂O, undergoes several decomposition reactions and produces the Sb^IIIS₃ species, which condenses to generate the layered anion. The application of transition‐metal complexes avoids crystallization of dense phases. The reactions are very fast compared to conventional hydrothermal/solvothermal syntheses and are much less sensitive to changes of the reaction parameters.