On Liouville type theorems for fully nonlinear elliptic equations with gradient term

In this paper, we prove a Hadamard property and Liouville type theorems for viscosity solutions of fully nonlinear elliptic partial differential equations with a gradient term, both in the whole space and in an exterior domain.     

Fe48Co52 Alloy Nanowire Arrays： Effects of Magnetic Field Annealing

The effects of magnetic field annealing on the properties of Fe48Co52 alloy nanowire arrays with various interwire distances （Di=30-60 nm） and wire diameters （Dw=22-46 nm） were investigated in detail. It was found that the array＇s best annealing temperature and crys- talline structure did not show any apparent dependence on the treatment of applying a 3 kOe magnetic field along the wire during the annealing process. For arrays with small Dw or with large Di, the treatment of magnetic field annealing also had no obvious influence on their magnetic performances. However, such a magnetic field annealing constrained the shift of the easy magnetization direction and improved the coercivity and the squareness obviously for arrays with large Dw or with small Di. The difference in the intensity of the effective anisotropic field within the arrays was believed to be responsible for this different variation of the array＇s magnetic properties after magnetic field annealing.     

Luminescent Property of a Supramolecular Silver(I)‐Thiolate Complex Based on Secondary Ag‐S Interactions and Hydrogen Bonds

The supramolecular silver(I)‐thiolate complex [Ag(μ₂‐SC₄N₂H₄)₂(SCN)]_n has been prepared from the reaction of AgSCN and pyrimidine‐2‐thiol in DMF. X‐ray diffraction analysis shows that the supramolecular structure exhibits one‐dimensional chain through the secondary Ag‐S interactions and the chains are further linked by strong hydrogen bonds to form a three dimensional network. The luminescence effect from the silver‐centered state of S→Ag LMCT in solid state is different from that in solution due to the secondary Ag‐S interactions.     

Enhancement of electrical properties due to Cr substitution in Co-ferrite nanoparticles synthesized by two chemical techniques

Nanocrystalline cobalt ferrites with nominal composition CoCr_xFe_2−xO₄ ranging from x=0.0 to 0.5 with step increment of 0.25 were prepared by sol–gel auto combustion and chemical co-precipitation techniques. A comparative study of structural, electrical and magnetic properties of these ferrites has been measured using different characterization techniques. Structural and micro-structural studies were measured using X-ray diffraction, Fourier transform infra-red spectroscopy (FTIR), scanning electron microscopy and atomic force microscopy. Crystallite sizes of the series are within the range of 12–29±2 nm. Lattice parameters decrease by increasing Cr³⁺ concentration. FTIR confirms the presence of two lattice absorption bands. DC electrical resistivity increases to a value of ∼10¹⁰ Ω-cm with increase in Cr³⁺ concentration, but the most significant increase is in samples prepared by sol–gel combustion. Dielectric properties have been measured as a function of frequency at room temperature. Dielectric loss decreases to 0.1037 and 0.0108 at 5 MHz for chemical co-precipitation and sol–gel combustion, respectively. Impedance measurements further helped in analyzing the electrical properties and to separate the grain and grain boundary resistance effects using a complex impedance analysis. Magnetic parameters were studied using a vibrating sample magnetometer in the applied field of 10 kOe. The saturation magnetization decreased from 63 to 10.8 emu/gm with increase in Cr³⁺ concentration.     

Decidability of the representation extension property for finite semigroups

We prove that the decision problem of whether or not a finite semigroup has the representation extension property is decidable.     

Synthesis and Effect of Cation Binding on Photophysical Properties of 1,8-Anthraceno-18-Crown-5

ThesystemsconsistingofafluorophorelinkedtoacrownethermoietyareeXtensivelyinvestigated'-'.Sincedrasticchangesintheirphotophysicalpropertiescanbeobservedbycomplexationwithion,theycanbeusedforionicdetection"'.Recentreportsfocusonazamacrocyclicderivativeswithfluorophores"',inwhichthefluorophoreandcrownethermoietywerelinkedvianitrogenatom.Thepresenceofabasicnitrogenatomwhichiseasytobeprotonatedleadstoelthancementoffluorescencequantumyield""'.Wereplacedthenitrogenatomofthecrownbyoxygenwhichisexpect…     

A novel organic rectorite modified bismaleimide/diallylbisphenol A system

4,4′‐Bismaleimidodiphenylmethane (BMIPM)/O,O′‐diallylbisphenol A (BA) system was modified by organic rectorite (OREC) to develop a novel BMI/BA/OREC nanocomposite. The effect of OREC on the viscosity and reactivity of BMIPM/BA system was investigated. The mechanical properties of BMIPM/BA/OREC composites such as the flexural and impact strength were evaluated. The morphology of cured BMIPM/BA/OREC systems was investigated by X‐ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The hot water resistance of BMIPM/BA/OREC systems was discussed. The thermal property of BMIPM/BA/OREC systems was investigated using thermogravimetric analysis (TGA). The dynamic mechanical properties of BMIPM/BA/OREC systems were also measured. Results show that the addition of OREC has a significant influence on the reactivity of the BMIPM/BA system. Proper content of OREC can improve the flexural strength, impact strength, and hot water resistance of a BMIPM/BA system. The addition of OREC cannot decrease the thermal degradation temperature of cured BMIPM/BA system with a slight sacrifice of the glass transition temperature (Tg). Copyright © 2008 John Wiley & Sons, Ltd.     

Thiol‐ene photopolymerization for efficient curing of vinyl esters

Monomers for radical photopolymerization based on vinyl esters (VEs) have recently been identified as suitable alternatives to (meth)acrylates on account of their low irritancy and cytotoxicity. The drawback of most VEs with abstractable hydrogens is their relatively low reactivity compared with (meth)acrylates. Within this article, we proved by photo‐differential scanning calorimetry measurements and real‐time Fourier transform infrared spectroscopy that the thiol‐ene concept is able to improve the photoreactivity of these VEs to a large extent to a level between those of acrylates and methacrylates. Other VEs have now a reactivity of at least the level of similar acrylates. Mechanical properties as determined by Dynamic Mechanical Analysis and Charpy impact tests showed significant toughening of these materials. Furthermore, we were able to confirm low toxicity of all components by osteoblast cell culture experiments. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Structure Evolution upon Uniaxial Drawing Skin‐ and Core‐Layers of Injection‐Molded Isotactic Polypropylene by In Situ Synchrotron X‐ray Scattering

The structure evolution of the oriented layer (skin) and unoriented layer (core) from injection‐molded isotactic polypropylene samples upon uniaxial drawing is probed by in situ synchrotron X‐ray scattering. The X‐ray data analysis approach, called “halo method”, is used to semiquantitatively identify the transformation process of crystal phase upon uniaxial drawing. The results verify the validation of the stress‐induced crystal fragmentation and recrystallization process in the deformation of the injection‐molded samples under different temperatures. Furthermore, the end of strain softening region in the engineering stress‐strain curves explicitly corresponds to the transition point from the stress‐induced crystal fragmentation to recrystallization process. Basically, the skin and core layers of the injection‐molded parts share the similar deformation mechanism as aforementioned. The stretching temperature which dramatically affects the relative strength between the entanglement‐induced tie chains and the adjacent crystalline lamellae determines the crystal structural evolution upon drawing. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1618–1631