Morphological and structural change of nano-pored alumina membrane above 1200 K

The transition and the change in pore morphology of a porous alumina membrane prepared by anodically oxidizing aluminum in sulfuric acid were studied mainly by TG-DTA, TMA, dilatometry and TEM. At ca. 1243 K, TMA showed an expansion followed by contraction; the CO₂ and SO₂ gases were quickly discharged, and the pore morphology of the as-prepared porous membrane (ca 150 mm-t, with pores ca 25 nm in diameter and containing ca 11% by mass of SO₂) showed an abrupt change, but the pores were retained to ca. 1573 K. Sulfur incorporated in the membrane was lost in two stages, i.e., at ca 1243 K and in a range up to 1373 K. Isothermal measurements revealed the complex crystallization of the amorphous phase into polycrystalline phase. This revised version was published online in August 2006 with corrections to the Cover Date.     

Application of Graphite-Epoxy Composite Electrodes in Differential Pulse Anodic Stripping Voltammetry of Heavy Metals

An analytical study on the use of graphite-epoxy composite (GEC) electrodes for differential pulse anodic stripping voltammetry (DPASV) of heavy metals is presented. This study is accompanied by microscopic observations of the electrode surface before and after the stripping step in comparison to glassy carbon electrode. GEC electrodes show much better accumulation properties and consequently acceptable behaviour which makes them suitable as working electrodes in the DPASV of heavy metals. Lead determination in real water samples in a batch system as well as some preliminary results in a flow-through system are presented. The detection limits in batch measurements were 100ppb for Cd, 10pb for lead and 50ppb for copper. The detection limit for lead in the flow-through system was similar to that in the batch. The results obtained show that these low cost and easy to prepare materials can be of interest in future research concerning stripping techniques of heavy metals and other analytes.     

Selection of Anodic Material Used in Electrolytic Process for Producing Hypophosphorous Acid

Black lead, Ti-Ru and Ti-PbO2 were used as anode and stainless steel was used as cathode The electrolytic process of producing hypophosphorous acid with four-compartment electrodialytic cell was studied. The comparison of some factors, such as anodic voltage, product concentration and current efficiency, of black lead, Ti-Ru, and Ti-PbO2 electrodes was conducted. As a result, theTi-PbO2 electrode is the optimal anode material used, it can be in electrolytic process for producing hypophosphorous acid.     

Ln2O3/Al2O3催化酯化合成邻苯二甲酸二辛酯

Ｌｎ_２Ｏ_３／Ａｌ_２Ｏ_３催化酯化合成邻苯二甲酸二辛酯陈其瑞，张凤美，罗明润，焦肇林（安徽师范大学化学系，芜湖２４１０００）关键词稀土氧化物，担载催化剂，催化酯化，邻苯二甲酸二辛酯邻苯二甲酸二（２－乙基己醇用酯（Ｄｉｏｃｔｙｌｐｈｔｈａｌａｔｅ）是一...     

Thermolysis of furoxans annulated with five-membered carbocycles in the presence of dipolarophiles

The conditions for the thermolysis of furoxans annulated with differently strained five-membered carbocycles (cyclopentafuroxan 1, norbornenofuroxan 2, and acenaphthofuroxan 3) to bis(nitrile oxides) in the presence of various dipolarophiles (diethyl acetylenedicarboxylate, benzoylformonitrile, and ethoxycarbonylformonitrile) were optimized. It was found that the reactivities of the above furoxans as sources of bis(nitrile oxides) decrease in the order 2 > 1 > 3. Among the furoxans studied, only norbornenofuroxan 2 can be recommended as a possible cross-linking reagent for polymers. The formation of di-N-oxides of 3,4-bis(cyanopropyl)-, 3,4-bis(cyanocyclopentyl)-, and 3,4-bis(cyanonaphthyl)furoxans was detected. They resulted from intermolecular cyclodimerization of bis(nitrile oxides) initially formed in the thermolysis of furoxans 1–3. Dedicated to Academician V. A. Tartakovsky on the occasion of his 75th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1521–1528, August, 2007.     

Polymer-supported calix[4]arenes for sensing and conversion of NO2/N2O4

The use of simple calix[4]arenes 1a,b for NO₂/N₂O₄ sensing and conversion is demonstrated, both in solution and in the solid state. Upon reacting with these gases, compounds 1a,b encapsulate reactive NO⁺ cations within their cavities with the formation of deeply colored (λ_max∼570 nm) charge-transfer complexes 2a,b. Further functionalization of the calix[4]arene platform is reported for attachment to solid supports. Polymer-supported calixarene material 3 was prepared, which reversibly traps NO₂/N₂O₄ with the formation of nitrosonium storing polymer 4. Material 4 was effectively used for nitrosation of amides.     

离子液体中电沉积制备钴纳米线阵列

Porous anodic alumina (PAA) was used as a template to prepare Co nanowires array from 1-ethyl-3-methylimidazolium chloride ionic liquid by direct current method. The surface morphology of porous anodic alumina template was observed by field emission-scanning tunneling microscopy (FE-SEM) before and after the electrodeposition of Co nanowires. The electrodeposition of Co nanowires was characterized by transmission electron microscopy (TEM) and X-ray powder diffraction (XRD). TEM results indicate that the Co nanowire surface is coarse and porous when aqueous solution was used as electrolyte， and the Co nanowire deposited from the ionic liquid is uniform and smooth. XRD results show that the electrodeposition of Co is a mixture of crystal and microcrystal phase.     

Nanorods of Various Oxides and Hierarchically Structured Mesoporous Silica by Sol-Gel Electrophoresis

In this paper, we report the template-based growth of nanorods of oxides and hierarchically structured mesoporous silica, formed by means of a combination of sol-gel processing and electrophoretic deposition. Both single metal oxides (TiO₂) and complex oxides (Pb(Zr_0.52Ti_0.48)O₃) have been grown by this method. This method has also been applied to the growth of nanorods of mesoporous silica having an ordered pore structure, where the pores are aligned parallel to the long axis of the nanorod. Uniformly sized nanorods of about 125–200 nm in diameter and 10 m in length were grown over large areas with near unidirectional alignment. Appropriate sol preparation yielded the desired stoichiometric chemical composition and crystal structure of the oxide nanorods, with a heat treatment (500–700°C for 15–30 min) for crystallization, densification and any necessary pyrolysis.     

New hybrid chelating sorbents with grafted 3-aminopropionate groups based on mixed silicon,aluminum, titanium,or zirconium oxides

A series of new hybrid organo-inorganic sorbents with the 3-aminopropionate chelating group was synthesized. The synthesis includes the copolycondensation (sol—gel method) of tetraethoxysilane, 3-aminopropyltriethoxysilane, and several modifiers (MeSi(OEt)₃, EtSi(OEt)₃, Ti(OEt)₄, AlONO₃, ZrOCl₂) followed by carboxyethylation with acrylic acid. The obtained chelating sorbents were characterized by elemental analysis, FT-IR and ¹H NMR spectroscopy, and thermogravimetry. The N-carboxylated sorbents have a higher sorption capacity with respect to metal ions (0.5–0.9 mmol g⁻¹, pH 6.3, NH₄OAc, 20 °C) than the starting sorbents with the primary amino group (0.05–0.2 mmol g⁻¹) and manifest high selectivity for copper(II) ion extraction. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1783–1788, August, 2005.