SDS及其与十二烷基三乙基溴化铵混合体系在矿化水中的表面活性

测定了十二烷基硫酸钠(SDS)、十二烷基三乙基溴化铵(DTEAB)单一体系及不同摩尔比的混合体系在矿化水溶液中的表面活性,并与在纯水和NaCl水溶液中的表面活性作了比较．所得结果表明：(1)阴离子表面活性剂SDS在含Ca^2 ,Mg^2 等的矿化水中有比在纯水和NaCl水溶液中更好的表面活性．这一方面是由于矿化水中的Ca^2 ,Mg^2 对负电胶团和表面吸附层的强烈电性作用,另一方面在大量Na^ 存在时,钠钙盐混合表面活性剂Krafft点提高不多;(2)SDS和DTEAB混合物在矿化水中具有很强的增效作用,其表面活性的变化规律与在纯水和NaCl水溶液中基本相同,表明阴阳离子表面活性剂混合体系具有优异的抗矿化水性能．这些结果可用阴、阳表面活性离子的电性作用解释．     

镧掺杂粘土源含铜氧化物催化剂的制备、表征及催化性能

采用共沉淀和水热法合成了不同阴离子粘土前驱型复合氧化物催化材料,样品经XRD,FTIR,TPR,TG-DSC,SEM进行表征.同时考察了铜含量在掺杂和不掺杂稀土时对甲烷催化燃烧的影响,结果发现随含铜量增加催化活性增加;未掺杂La的催化剂在高温下出现失活现象,而掺杂型催化剂稳定性良好.同时,制备方法对催化剂的性能有显著影响,在不同制备前驱物pH的条件下,使用共沉淀和水热法合成的阴离子粘土材料,合成时的pH均对催化剂的活性影响较大;同时焙烧温度对催化活性有不同程度的影响.     

第一性原理对GanP-m阴离子团簇结构及其光电子能谱的研究

本文利用密度泛函理论(DFT)对GanP-(n=2-7)和GanP2-(n=1-6)阴离子团簇的几何结构、电子态及稳定性进行了研究.在B3LYP/6-31G*水平上进行了结构优化和频率分析,得到了GanP-(n=2-7)和GanP2-(n=1-6)团簇的基态结构.这些阴离子团簇的几何结构随着n的增大,在n=5时由平面结构转化为立体结构;在GanP2-(n=1-6)团簇中,P-P比Ga-P容易成键;在GanP-(n=2-7)和GanP2-(n=1-6)阴离子团簇中,Ga3P2-,Ga4P2-,Ga5P2-和Ga6P-的基态结构最稳定.     

Synthesis of amphiphilic tadpole‐shaped copolymers by combination of glaser coupling with living anionic polymerization and ring‐opening polymerization

The tadpole‐shaped copolymers polystyrene (PS)‐b‐[cyclic poly(ethylene oxide) (PEO)] [PS‐b‐(c‐PEO)] contained linear tail chains of PS and cyclic head chains of PEO were synthesized by combination of Glaser coupling with living anionic polymerization (LAP) and ring‐opening polymerization (ROP). First, the functionalized polystyrene‐glycerol (PS‐Gly) with two active hydroxyl groups at ω end was synthesized by LAP of St and the subsequent capping with 1‐ethoxyethyl glycidyl ether and then deprotection of protected hydroxyl group in acid condition. Then, using PS‐Gly as macroinitiator, the ROP of EO was performed using diphenylmethylpotassium as cocatalyst for AB₂ star‐shaped copolymers PS‐b‐(PEO‐OH)₂, and the alkyne group was introduced onto PEO arm end for PS‐b‐(PEO‐Alkyne)₂. Finally, the intramolecular cyclization was performed by Glaser coupling reaction in pyridine/Cu(I)Br/N,N,N′,N″,N″‐pentamethyldiethylenetriamine system under room temperature, and tadpole‐shaped PS‐b‐(c‐PEO) was formed. The target copolymers and their intermediates were well characterized by size‐exclusion chromatography, proton nuclear magnetic resonance spectroscopy, and fourier transform infrared spectroscopy in details. The thermal properties was also determined and compared to investigate the influence of architecture on properties. The results showed that tadpole‐shaped copolymers had lower T_m, T_c, and X_c than that of their precursors of AB₂ star‐shaped copolymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of 4μ‐PS2PEO2, 4μ‐PS2PCL2, 4μ‐PI2PEO2, and 4μ‐PI2PCL2 star‐shaped copolymers by the combination of glaser coupling with living anionic polymerization and ring‐opening polymerization

4μ‐A₂B₂ star‐shaped copolymers contained polystyrene (PS), poly(isoprene) (PI), poly(ethylene oxide) (PEO) or poly(ε‐caprolactone) (PCL) arms were synthesized by a combination of Glaser coupling with living anionic polymerization (LAP) and ring‐opening polymerization (ROP). Firstly, the functionalized PS or PI with an alkyne group and a protected hydroxyl group at the same end were synthesized by LAP and then modified by propargyl bromide. Subsequently, the macro‐initiator PS or PI with two active hydroxyl groups at the junction point were synthesized by Glaser coupling in the presence of pyridine/CuBr/N,N,N ′,N ″,N ″‐penta‐methyl diethylenetri‐amine (PMDETA) system and followed by hydrolysis of protected hydroxyl groups. Finally, the ROP of EO and ε‐CL monomers was carried out using diphenylmethyl potassium (DPMK) and tin(II)‐bis(2‐ethylhexanoate) (Sn(Oct)₂) as catalyst for target star‐shaped copolymers, respectively. These copolymers and their intermediates were well characterized by SEC, ¹H NMR, MALDI‐TOF mass spectra and FT‐IR in details. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of poly(p‐phenylene)‐poly(4‐diphenylaminostyrene) bipolar block copolymers with a well‐controlled and defined polymer chain structure

A poly(p‐phenylene) (PPP)‐poly(4‐diphenylaminostyrene) (PDAS) bipolar block copolymer was synthesized for the first time. A prerequisite prepolymer, poly(1,3‐cyclohexadiene) (PCHD)‐PDAS binary block copolymer, in which the PCHD block consisted solely of 1,4‐cyclohexadiene (1,4‐CHD) units, was synthesized by living anionic block copolymerization of 1,3‐cyclohexadiene and 4‐diphenylaminostyrene. To obtain the PPP‐PDAS bipolar block copolymer, the dehydrogenation of this prepolymer with quinones was examined, and tetrachloro‐1,2‐(o)‐benzoquinone was found to be an appropriate dehydrogenation reagent. This dehydrogenation reaction was remarkably accelerated by ultrasonic irradiation, effectively yielding the target PPP‐PDAS bipolar block copolymer. The hole and electron drift mobilities for PPP‐PDAS bipolar block copolymer were both on the order of 10^?3 to 10^?4 cm²/V·s, with a negative slope when plotted against the square root of the applied field. Therefore, this bipolar block copolymer was found to act as a bipolar semi‐conducting copolymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Anionic alternating copolymerization of epoxide and six‐membered lactone bearing naphthyl moiety

This article describes the anionic copolymerization of glycidyl phenyl ether (GPE) and 1,2‐dihydro‐3H‐naphtho[2,1‐b]pyran‐3‐one (DHNP), a six‐membered aromatic lactone bearing naphthyl moiety. The copolymerization proceeded in a 1:1 alternating manner, to afford the corresponding polyester. The ester linkage in the main chain was cleavable by reduction with lithium aluminum hydride to give the corresponding diol that inherited the structure of the alternating sequence. The copolymerization ability of DHNP permitted its addition as a comonomer to an imidazole‐initiated polymerization of bisphenol A diglycidyl ether. The resulting networked polymer, of which main chain was endowed with the DHNP‐derived rigid naphthalene moieties, showed a higher glass transition temperature than that obtained similarly with using 3,4‐dihydrocoumarin (DHCM) as a comonomer, an analogous aromatic lactone bearing phenylene moiety instead of naphthalene moiety of DHNP. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Controlled polymerization of epoxides: Metal‐free ring‐opening polymerization of glycidyl phenyl ether initiated by tetra‐n‐butylammonium fluoride in the presence of protic compounds

Metal‐free controlled ring‐opening polymerization of glycidyl phenyl ether (GPE) was achieved using tetra‐n‐butylammonium fluoride (Bu₄NF) as an initiator in the presence of water and ethanol as chain transfer agents (CTAs). Number‐averaged molecular weight of poly(GPE) increased with an increase of [GPE]₀/([Bu₄NF]₀ + [CTA]₀) values, showing relatively narrow molecular weight distributions. NMR spectroscopic analysis exhibited a formation of ethoxy groups as well as FCH₂ at the initiating polymer chain‐end when ethanol was used as the CTA in the polymerization. These results indicate that Bu₄NF acts as a catalyst as well as the initiator for this polymerization system. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of porphyrin‐end‐functionalized polycyclohexane with well‐controlled and defined polymer chain structure

Tetraphenylporphyrin‐end‐functionalized polycyclohexane (H₂TPP‐PCHE) and its metal complexes (MTPP‐PCHE) were synthesized as the first successful example of porphyrin‐end‐functionalized transparent and stable polymers with a well‐controlled and defined polymer chain structure. Chloromethyl‐end‐functionalized poly(1,3‐cyclohexadiene) (CM‐PCHD) was synthesized as prerequisite prepolymer by the postpolymerization reaction of poly(1,3‐cyclohexadienyl)lithium and chloro(chloromethyl)dimethylsilane. CM‐end‐functionalized PCHE (CM‐PCHE) was prepared by the complete hydrogenation of CM‐PCHD with p‐toluenesulfonyl hydrazide. H₂TPP was incorporated onto the polymer chain end by the addition of 5‐(4‐hydroxyphenyl)‐10,15,20‐triphenylporphyrin to CM‐PCHE. The complexation of H₂TPP‐PCHE and Zn(OAc)₂ (or PtCl₂) yielded a zinc (or platinum) complex of H₂TPP‐PCHE. H₂TPP‐PCHE and MTPP‐PCHE were readily soluble in common organic solvents, and PCHE did not inhibit the optical properties of the H₂TPP, ZnTPP, and PtTPP end groups. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011