Flow injection spectrophotometric method for chloride determination in natural waters using Hg(SCN)(2) immobilized in epoxy resin

A flow injection (FI) spectrophotometric method was proposed for the determination of chloride ion in natural waters. The determination of chloride was carried out by reaction with Hg(SCN)₂ immobilized in an epoxy resin bead in a solid-phase reactor (SPR) and the thiocyanate ions released were determined spectrophotometrically at 480 nm after complexing reaction with Fe(III). The analytical curve for chloride was linear in the concentration range from 5.6 × 10⁻⁵ to 2.2 × 10⁻⁴ mol l⁻¹ with a detection limit of 1.4 × 10⁻⁵ mol l⁻¹. The relative standard deviation (R.S.D.) was 2.2% for a solution containing 2.2 × 10⁻⁴ mol l⁻¹ (n = 10). The simple manifold allows a routine analytical frequency of 100 determinations per hour. The main advantage of the developed method is the 400% reduction of the Hg waste solution generated when compared to conventional methods for chloride determination based on the same spectrophotometric reaction.     

A dual-electrode approach for highly selective detection of glucose based on diffusion layer theory: experiments and simulation

A dual-electrode configuration for the highly selective detection of glucose in the diffusion layer of the substrate electrode is presented. In this approach, a glassy carbon electrode (GCE, substrate) modified with a conductive layer of glucose oxidase/Nafion/graphite (GNG) was used to create an interference-free region in its diffusion layer by electrochemical depletion of interfering electroactive species. A Pt microelectrode (tip, 5 microm in radius) was located in the diffusion layer of the GNG-modified GCE (GNG-G) with the help of scanning electrochemical microscopy. Consequently, the tip of the electrode could sense glucose selectively by detecting the amount of hydrogen peroxide (H2O2) formed from the oxidization of glucose on the glucose oxidase layer. The influences of parameters, including tip-substrate distance, substrate potential, and electrolyzing time, on the interference-removing efficiency of this dual-electrode approach have been investigated systematically. When the electrolyzing time was 30 s, the tip-substrate distance was 1.8 a (9.0 microm) (where a is the radius of the tip electrode), the potentials of the tip and substrate electrodes were 0.7 V and 0.4 V, respectively, and a mixture of ascorbic acid (0.3 mM), uric acid (0.3 mM), and 4-acetaminophen (0.3 mM) had no influence on the glucose detection. In addition, the current-time responses of the tip electrode at different tip-substrate distances in a solution containing interfering species were numerically simulated. The results from the simulation are in good agreement with the experimental data. This research provides a concept of detection in the diffusion layer of a substrate electrode, as an interference-free region, for developing novel microelectrochemical devices.     

FREE VIBRATION ANALYSIS OF LATTICE SANDWICH BEAMS UNDER SEVERAL TYPICAL BOUNDARY CONDITIONS

Free vibration problems of lattice sandwich beams under several typical boundary conditions are investigated in the present paper. The lattice sandwich beam is transformed to an equivalent homogeneous three-layered sandwich beam. Unlike the traditional analytical model in which the rotation angles of the face sheets and the core are assumed the same, different rotation angles are considered in this paper to characterize the real response of sandwich beams. The analytical solutions of the natural frequencies for several typical boundary conditions are obtained. The effects of material properties and geometric parameters on the natural frequencies are also investigated.     

The U.S. Department of Energy (DOE) Sampling and Analytical Chemistry Guide: Doe Methods for Evaluating Environmental and Waste Management Samples

Abstract

DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) is a guidance/methods document to support sampling and analysis activities at DOE sites. DOE Methods is intended to supplement existing guidance documents (e.g., EPA's Test Methods for Evaluating Solid Waste, SW-846), which generally apply to low-level or nonradioactive samples. DOE Methods targets the complexities of DOE radioactive mixed waste and environmental samples. The document contains quality assurance (QA), quality control (QC), safety, sampling, organic analysis, inorganic analysis, and radioanalytical guidance as well as sampling and analytical methods. An addendum is distributed every six months (April and October) with updated guidance and additional methods.

DOE Methods provides a vehicle for technology transfer within the environmental restoration (ER) and waste management (WM) (collectively known as EM) community. As DOE Methods evolves, its usefulness and applicability are anticipated to grow to meet the demands of the DOE/EM mission. At the present time, DOE Methods contains methods and guidance information supplied by DOE sites. Because the EM activities in DOE are not unique to the United States, the international environmental community could benefit from the information gathered for the DOE program. This information could provide additional resources for their EM activities.     

非化学专业无机及分析化学“讲练考”教学模式改革

This article discussed "teaching-practice-test" teaching mode with teaching practical experience and content matching.Results showed that this mode highlighted the proportion of practice and problem-solving in the process of learning; improved students' ability to solve problems using professional and disciplinary knowledge; changed learning styles from cramming way to autonomous learning step by step and trained students' creativity.     

The inventory models under conditional trade credit in a supply chain system

In several recent investigations dealing with the economic order quantity with permissible delay in payments, the following assumptions are made:     

The extended Hulburt–Hirschfelder‐long‐range oscillator model for direct‐potential‐fit analysis

In the present work, an extended Hulburt–Hirschfelder oscillator model is proposed as a means of simplifying potential energy functions for direct‐potential‐fit analyses. The new potential energy function is joined smoothly to the long‐range inverse‐power dispersion energy expression. The new model is employed in direct‐potential‐fits using spectroscopic line positions that involve the ground electronic states of the principal isotopologues of hydrogen iodide and carbon monoxide, and the ground and first singlet‐sigma excited states of hydrogen fluoride and hydrogen chloride. The present methodology is found to lead to compact, flexible, and robust representations for the potential energy that compare favorably with the results of past work where more complicated models were employed.     

福建省首届大学生化学实验邀请赛无机及分析化学实验试题解析

介绍了福建省首届大学生化学实验邀请赛无机及分析化学实验的命题思路、试题原题及评分规则,并对实验中存在的问题及成绩进行了总结分析。