Single-walled carbon nanotubes as solid-phase microextraction adsorbent for the determination of low-level concentrations of butyltin compounds in seawater

Carbon nanotubes are a kind of new carbon-based nanomaterials, which have drawn great attention in many application fields. The potential of single-walled carbon nanotubes (SWCNTs) as solid-phase microextraction (SPME) adsorbent for the preconcentration of environmental pollutants has been investigated in recent years. In the present study, the feasibility of SWCNTs as SPME adsorbent for the determination of monobutyltin, dibutyltin and tributyltin in seawater samples was studied. To achieve this aim, the potential factors affecting the SPME efficiency, including extraction time, extraction temperature, desorption time, desorption temperature, and salinity were optimized. The developed method showed good performance according to the ICH (International Conference on Harmonization of Technical Requirements for Analytical Methods) criteria. The acquired calibration curves were linear (r ≥ 0.992) over the concentration range from ≤12 to 2000 ng L⁻¹. For all of the analytes, the limit of detection at signal-to-noise ratio of 3 was below 5 ng L⁻¹. Furthermore, in comparison with the commercial carboxen/polydimethylsiloxane fiber, the developed SWCNT fiber showed better thermal stability (over 350 °C) and longer life span (over 150 times). The application of the proposed method in environmental analyses was shown by analyzing seawater samples from the harbors on the Persian Gulf for butyltin residues. Some of the butyltins were detected in the analyzed samples. Results of the present study demonstrate the feasibility of the SWCNTs as SPME adsorbent for the determination of butyltins in seawater samples.     

Darstellung und Strukturen einiger N-(Tri-t-butoxysilyl)anilin-Derivate

Formation and Structures of N-(tri-t-butoxysilyl)aniline Compounds Para-substituted N-(tri-t-butoxysilyl)anilines (t-BuO)₃SiNRC₄H₄X-p, R = H, CH₃, with substituents of high electron affinity (X = CN, NO₂) were prepared by a one-pot reaction of tri-t-butoxychlorsilane, potassium t-butanolate and substituted anilines. Corresponding compounds with substituents of low electron affinity (X = OMe, H) preferably were prepared by metalation of anilines with sodium amide. Four crystal structures were determined. N-(tri-t-butoxysilyl)-p-nitro-aniline, N-methyl-(N-tri-t-butoxysilyl)-p-nitroaniline and N-(tri-t-butoxysilyl)-p-cyanoaniline crystallize at 298 K monoclinically, N-(tri-t-butoxysilyl)aniline crystallizes orthorhombically.     

A sol-gel route for the development of rare-earth aluminum borate nanopowders and transparent thin films

A new sol-gel route was applied to obtain Y_0.9Er_0.1Al₃(BO₃)₄ crystalline powders and amorphous thin films by using Al(acac)₃, B(OPrⁱ)₃, Y(NO₃)₃·6H₂O, and Er(NO₃)₃·5H₂O as starting materials dissolved in propionic acid and ethyl alcohol mixtures. Our study shows that propionic acid acts as good chelant agent for yttrium and erbium ions while ethyl alcohol allows to dissolve Al(acac)₃. This process makes the resulting sols very stable to obtain homogeneous gels and transparent amorphous thin films. In addition, the propionic acid prevents the sol precipitation, making easy porous- and crack-free thin film depositions. Chemical reactions involved in the complexation were discussed. As-prepared powders and films are amorphous and present a good thermal stability due to their high glass transition (746 °C) and crystallization temperatures (830 °C). This new sol-gel route showed to be adequate to obtain dense and crack-free thin films free of organic and hydroxyl groups that can be considered as promising materials to be used in integrated optical systems.     

Chiral selectors for enantioresolution and quantitation of the antidepressant drug fluoxetine in pharmaceutical formulations by (19)F NMR spectroscopic method

¹⁹F NMR spectroscopy was applied to the quantitative determination of fluoxetine enantiomers using different chiral recognition agents in pharmaceutical formulations. Several parameters affecting the enantioresolution including the type and concentration of chiral selector, concentration of fluoxetine and temperature were studied. The chiral selectors investigated are the cyclic oligosaccharides α-, β- and γ-cyclodextrin and a diamino derivative of methylated α-cyclodextrin (DAM-α-CD), linear polysaccharides (maltodextrin with dextrose equivalents of 4.0-7.0, 13.0-17.0 and 16.5-19.5) and the macrocyclic antibiotic vancomycin. Among the chiral selectors used, DAM-α-CD turned out to give the best resolution of the ¹⁹F NMR signals of (R)- and (S)-fluoxetine. The calibration curve was linear for (R)- and (S)-fluoxetine over the range 0.10-1.35 mg mL⁻¹, the detection limits (S/N = 3) being 5.9 and 7.5 μg mL⁻¹ for the pure solutions of (R)- and (S)-fluoxetine, respectively. The recovery studies performed on pharmaceutical samples ranged from about 90 to 110% with relative standard deviations of <8%. The results showed that the proposed method is rapid, precise and accurate. Applying statistical Student's t-test revealed insignificant difference between the real and measured contents at the 95% confidence level.     

Organotin(IV) complexes with 2-hydroxynaphthaldehyde-N(4)-ethylthiosemicarbazone: Synthesis,characterization, and in vitro antibacterial activity

Four new organotin(IV) complexes with 2-hydroxynaphthaldehyde-N(4)-ethylthiosemicarbazone [(H₂DNET), (1)] of the type [MeSnCl(DNET] (2), [BuSnCl(DNET)] (3), [PhSnCl(DNET)] (4), and [Ph₂Sn(DNET] (5) have been synthesized by the direct reaction of H₂DNET (1) with organotin(IV) chloride(s) in the presence of potassium hydroxide in absolute methanol. All the compounds were characterized by elemental analyses, molar conductivity, UV-Vis, IR, ¹H, ¹³C, and ¹¹⁹Sn NMR spectral studies. The molecular structure of ligand (1) has been confirmed by X-ray single crystal diffraction. Spectroscopic data clearly suggested that Sn(IV) center is coordinated with the ONS tridentate ligand (H₂DNET) and exhibits a five-coordinate geometry in solution. Antibacterial studies were carried out in vitro against four bacterial strains. All organotin(IV) compounds (2–5) showed good activity against various bacteria but lower activity than the reference drug (Ciprofloxacin). The results demonstrate that organic groups attached to tin(IV) moiety have significant effect on their biological activities. Among them, diphenyltin(IV) derivative 5 exhibits significantly good activity than the other organotin(IV) derivatives (2–4).     

Enhancing chemical analysis with signal derivatization using simple available software packages

Derivative techniques for analytical signal processing are useful for solving some noise and signal resolution problems in various fields of study such as titrimetry, spectrophotometry, chromatography and electrochemistry. The broad use of these techniques, however, is often limited by costly inflexible built-in software packages in commercial analytical instruments. We propose here the application of commercial simple software packages such as Microsoft® Excel and Microcal Origin for signal smoothing and fitting, and for obtaining derivative analytical signals in batch and flow-based analyses, including potentiometric titration, spectrophotometry, chromatography, voltammetry and sequential injection analysis (SIA). The worldwide (especially Excel) software packages are easy-to-use for less experienced users and have also capabilities for advanced users, and therefore employing such packages can result in expansion of useful derivative techniques. We demonstrate application of the available package-aided derivative capabilities for enhancing some chemical analyses, including potentiometric acid–base titration, Bradford assay of protein, chromatographic separation of ajmaline and reserpine and anodic stripping voltammetry of copper. The derivative signals from smoothed and fitted curves offer better accuracy and precision, even for non-resolving peaks and tailing peaks. In some cases, the optimization of experimental conditions is not further required, which can lead to fast method development.     

Transition metal(II) ions with dinegative tetradentate schiff base

Some new coordination polymers of Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II), obtained from the interaction of metal acetate with dipotassium salt of N,N’-di(carboxyethylidene)terephthalaldehydediimine (K₂SB) are described. The products, which have been characterized by elemental analyses, magnetic measurements, thermogravimetric analyses, electronic and infrared spectral studies, have composition, [M(SB)(H₂O)₂]_n. These colored coordination polymers are non-hygroscopic and quite stable at room temperature. On the basis of analytical data and IR studies, a 1:1 metal to ligand stoichiometry has been suggested to these coordination polymers. The IR studies have also revealed that ligands are coordinated to metal ion through carboxy oxygen and azomethine nitrogen. All the studies suggested tetradentate nature of the ligand with octahedral symmetry of the coordination polymers. All the coordination polymers are insoluble in acetone, ethanol, chloroform, methanol, benzene, DMF and DMSO. The thermal decomposition of the coordination polymers is studied and indicates that not only the coordinated water is lost but also that the decomposition of the ligand from the coordination polymers is necessary to interpret the successive mass loss.     

Thermal behavior of Cu(II)-, Cd(II)-, and Hg(II)-exchanged montmorillonite complexedwith cysteine

The thermal behavior of montmorillonite and organically modified montmorillonite, both treated with heavy metal cations [Cu(II), Cd(II) and Hg(II)], was characterized via thermal analyses (TG, DTG and DTA) combined with evolved species gas mass spectrometry (MS-EGA), and X-ray diffraction at in situ controlled temperature (HTXRD). The reactions involving Cu(II)- and Cd(II)-montmorillonite samples are mostly related to H₂O and OH loss, unlike Hg(II)-montmorillonite, where effects associated to Hg(II) loss are also present. Finally reactions related to dehydration, dehydroxylation and to organic matter decomposition can be observed in montmorillonite samples treated with cysteine.     

第32届江苏省化学竞赛选拔赛有机化学试题解析*

利用有机化学基础知识和理论对第32届江苏省化学竞赛选拔赛试题有机化学部分进行详细解析,为指导老师和参赛学生提供参考。     

Energetic and topological analyses of the oxidation reaction between Mo(n) (n = 1, 2) and N2O

The interaction between molybdenum, atom, and dimer, with nitrous oxide has been investigated using density functional theory. The analysis of the potential energy surfaces for both reactions has revealed that a single molybdenum atom can activate the N--O bond of N2O requiring a small activation energy. However, the presence of several intersystem crossings between three different spin states, namely, septet, quintet and triplet states, seems to be the major constraint to the Mo + N2O reaction. Contrarily, the low-lying excited states (triplet and quintet) do not participate in the reaction between the molybdenum dimer and N2O. The latter reaction fully evolves on the singlet spin surface. Three different regions have been distinguished along the pathway: formation of an adduct complex, formation of an inserted compound, and the N2 detachment. The connection between the two first regions has been characterized by the formation of a special complex in which the N--O bond is so weakened that it could be considered as a first step in the insertion process. It has been shown that the topological changes along the pathways provide a clear explanation for the geometrical changes that occur along the reaction pathway. In summary, the detachment of the N2 molecule is found to be kinetically an effective process for both reactions, owing to the high exothermicity and consequently to the high internal energy of the insertion intermediates. However, in the case of Mo atom, the reaction should be a slow process due to the presence of spin-forbidden transitions. These results fully agree with previous experimental works.