大孔吸附树脂处理含磺胺废水的研究

利用大孔吸附树脂处理含磺胺废水。实验表明，DRHⅢ树脂对磺胺具有良好的吸附－解吸效果。原废水中磺胺浓度约为17.2g/L,COD约为13750mg/L，经树脂吸附处理后，废水中COD去除率约86％，磺胺的吸附率88．2％，树脂的解吸率为97．5％，磺胺的回收率约86．0％，其纯度达99．8％。在废水有效处理的同时实现了废物资源化，具有良好的环境效益和较高的经济效益。     

三价锰离子引发烯类单体在聚乙烯醇上接枝聚合的研究

<正> 无论是淀粉;纤维素,还是聚乙烯醇(PVA)的接枝反应,Ce(Ⅳ)被认为是一个十分有效的引发剂,已有较详尽的研究。与Ce(Ⅳ)相类似,Mn(Ⅲ)也可以和一些高聚物组成氧化还原引发体系,由此产生自由基,引发烯类单体在高分子主干上进行接枝聚合。Ranby等人,以焦磷酸络合的三价锰离子引发烯类单体在纤维素和淀粉的接枝反应中,获得了高效的接枝产物。有用这种引发体系在淀粉上接枝丙烯腈获得吸水276     

芳香PET树脂母粒的研制

通过丙烯酸和丙烯酸正丁酯溶液共聚合，得到丙烯酸－丙烯酸正丁酯共聚物，该树脂与环氧氯丙烷反应后再与PET树脂切片继续反应，可使PET树脂切片表面形成聚丙烯酸酯自膨润型吸油网络结构，将表面具有聚丙烯酸酯自身膨润型吸油网络结构的PET树脂切片（简称为留香剂）在油溶性香精中浸泡，香精就被吸附在留香剂表面，即得到芳香PET树脂母粒。用SEM观察了母粒的表面结构形态。     

笼形聚偕胺肟树脂的研究─—H_2PtCl_6在酸处理树脂上的吸附过程

H2PtCl6可被一系列的酸处理定形聚偕胺肟树脂所吸附，吸附容量的大小与处理树脂的质子酸的Pka值有关．认为是解高度低的酸所处理的树脂上的伯胺基成盐的机会较少，即树脂的吸附中心保留着较多的空穴，有利于H2PtCl6的接近而被吸附下来．吸附动力学的研究表明化学反应是吸附速度的控制因素。     

CARBONIZED FIBROUS RESIN AS A NEW SORBENT FOR SAMPLING POLYCYCLIC AROMATIC HYDROCARBONS (PAHS) IN AMBIENT AIR

1. INTRODUCTION When investigating contaminated sites it is often essential to determine specific pollutants in a large number of ambient air samples. Amongst these sites, polycylic aromatic hydrocarbons (PAHs) are a major class of compounds that hav…     

螯合树脂交换——光度法测定氯化钠溶液中微量镁

研究了用螯合树脂交换分离富集氯化钠溶液中微量镁及吸光光度法测定镁含量的方法。回收率为９６．０－１０１．０％，在ＰＨ１０的硼砂－氢氧化钠介质中，镁含量在０－１２μｇ／２５ｍｌ范围内符合比耳定律。方法稳定性高、重现性好。     

一种新型两性表面活性剂的合成

两性表面活性剂分子既含有阳离子亲水基,又含有阴离子亲水基,因而有其它表面活性剂所不具备的优异性能。本文将月桂酸和N-(2-羟乙基)乙二胺热缩合脱水,得到2-十一烷基-1-(2-羟乙基)-2-咪唑啉(1)。接着在还原剂的作用下,咪唑啉环碳氮双键还原并开环得到一般方法难以合成的N,N-二取代乙二胺(2)。(2)通过甲酰化(3)季铵化,引入两性离子,得到     

Synthesis of Ultrafine SiC Powders from Carbon-Silica Hybridized Precursors with Carbothermic Reduction

Inorganic-organic hybrid gels were prepared by simultaneous condensation of the liquid mixture of ethyl silicate, ethyl borate and water soluble phenol resin with low molecular weight. The liquid mixtures were changed into lightly colored transparent gels after a catalyst addition and stirring. The obtained gels were crushed, dried and fired in controlled conditions to yield the inorganic precursors. Since the tailored inorganic precursors mainly consisted of SiO2 and carbon, silicon carbide was formed with the heat treatments in an Ar atmosphere beyond 1773 K with carbothermic reduction. The properties and morphology of the formed silicon carbide powders in terms of the starting precursor compositions and the conditions of the carbothermic reduction were investigated with SEM, XRD and TG-DTA analysis.     

Mechanistic study of thermal behavior and combustion performance of epoxy resins: I homopolymerized TGDDM

Tetraglycidyl 4,4′-diaminodiphenylmethane (TGDDM) undergoes homopolymerization on heating. Intramolecular reactions which compete with crosslinking favor the formation of cyclic structures with increasing thermal and fire resistance of the resin, whereas physical mechanical properties tend to decrease. The mechanism of thermal decomposition of TGDDM is studied by thermogravimetry, differential scanning calorimetry and thermal volatilization analysis with characterization of volatiles evolved and residue left. Thermal degradation of poly-(TGDDM) starts at 260°C with elimination of water from secondary alcoholic groups which is a typical pathway for epoxy resin degradation. Resulting unsaturations weaken bonds in the β-position and provoke the first chain breaking at allyl–amine and allyl–either bonds. With increasing temperature, saturated alkyl–ether bonds and alkyl carbon–carbon bonds are broken first, followed by the most stable alkyl–aryl bonds at T>365°C. The combustion performance of TGDDM is discussed on the basis of the thermal degradation behavior.     

A straightforward preparation of a polystyrene thiol resin

A mild and efficient two-step synthesis of a polystyrene thiol resin is reported. Firstly, a polystyrene resin was reacted with an activated sulfoxide to afford the resin bound bis-(2-methoxy-carbonylethyl)-sulfonium trifluoromethanesulfonate. Smooth β-elimination based dealkylations afforded the polystyrene thiol resin with good and controlled loading. Its reactivity was assessed through a derivatisation step.