Dramatic Influence of an Anionic Donor on the Oxygen‐Atom Transfer Reactivity of a MnV–Oxo Complex

Addition of an anionic donor to an Mn^V(O) porphyrinoid complex causes a dramatic increase in 2‐electron oxygen‐atom‐transfer (OAT) chemistry. The 6‐coordinate [Mn^V(O)(TBP₈Cz)(CN)]^? was generated from addition of Bu₄N⁺CN^? to the 5‐coordinate Mn^V(O) precursor. The cyanide‐ligated complex was characterized for the first time by Mn K‐edge X‐ray absorption spectroscopy (XAS) and gives Mn?O=1.53 Å, Mn?CN=2.21 Å. In combination with computational studies these distances were shown to correlate with a singlet ground state. Reaction of the CN^? complex with thioethers results in OAT to give the corresponding sulfoxide and a 2e^?‐reduced Mn^III(CN)^? complex. Kinetic measurements reveal a dramatic rate enhancement for OAT of approximately 24 000‐fold versus the same reaction for the parent 5‐coordinate complex. An Eyring analysis gives ΔH^≠=14 kcal mol^?1, ΔS^≠=?10 cal mol^?1 K^?1. Computational studies fully support the structures, spin states, and relative reactivity of the 5‐ and 6‐coordinate Mn^V(O) complexes.     

Reversible,Photoinduced Activation of P4 by Low‐Coordinate Main Group Compounds

Two unique systems based on low‐coordinate main group elements that activate P₄ are shown to quantitatively release the phosphorus cage upon short exposure to UV light. This reactivity marks the first reversible reactivity of P₄, and the germanium system can be cycled 5 times without appreciable loss in activity. Theoretical calculations reveal that the LUMO is antibonding with respect to the main group element–phosphorus bonds and bonding with respect to reforming the P₄ tetrahedron, providing a rationale for this unprecedented activity, and suggesting that the process is tunable based on the substituents.     

基于膦酸基的高温质子交换膜的研究进展

提高质子交换膜燃料电池(PEMFCs)的工作温度,不但可以提高电催化剂的活性以及电催化剂对原料气中CO等杂质气体的耐受能力,少用甚至不用Pt 等贵金属作电催化剂,还可以简化PEMFCs的水热管理系统,提高PEMFCs的综合能量转化效率. 实现高温PEMFCs的核心是开发能够适用于高温PEMFCs的高温质子交换膜(HT-PEM),是PEMFCs的研究热点. 在众多HT-PEM候选材料中,基于膦酸基的质子交换膜材料是最具前途的候选材料之一,是制备HT-PEM的主要研究方向. 本文综述了基于膦酸基的HT-PEM的研究进展,讨论了膦酸基参与的质子传导机理,比较了纯聚合物膦酸膜、膦酸基接枝改性膜、酸-碱两性膜、掺杂型复合膜的电导率、物理化学稳定性、机械性能等. 最后,展望了基于膦酸基的HT-PEM的发展趋势.     

Disentangling Reaction Processes of Zeolites within Single‐Oriented Channels

Establishing structure–reactivity relationships for specific channel orientations of zeolites is vital to developing new, superior materials for various applications, including oil and gas conversion processes. Herein, a well‐defined model system was developed to build structure–reactivity relationships for specific zeolite‐channel orientations during various catalytic reaction processes, for example, the methanol‐ and ethanol‐to‐hydrocarbons (MTH and ETH) process as well as oligomerization reactions. The entrapped and effluent hydrocarbons from single‐oriented zeolite ZSM‐5 channels during the MTH process were monitored by using operando UV/Vis diffuse reflectance spectroscopy (DRS) and on‐line mass spectrometry (MS), respectively. The results reveal that the straight channels favor the formation of internal coke, promoting the aromatic cycle. Furthermore, the sinusoidal channels produce aromatics, (e.g., toluene) that further grow into larger polyaromatics (e.g., graphitic coke) leading to deactivation of the zeolites. This underscores the importance of careful engineering of materials to suppress coke formation and tune product distribution by rational control of the location of zeolite acid sites and crystallographic orientations.     

Structure and reactivity of peroxide monomers

The reactivity of both the peroxide (2-tert-butylperoxy-2-methyl-5-hexene-3-yne) and hydroperoxide (2-hydroperoxy-2-methyl-5-hexene-3-yne) monomers in the radical copolymerization was compared. Using the Alfrey-Price Q and e scheme, Hammett correlations, and MNDO quantum-chemical model it was shown that both peroxy- and hydroperoxyisopropylic substituents pronounce a similar positive effect of hyperconjugation. Despite that these monomers showed different reactivity due to the ability of the hydroperoxide monomer to form complexes with protonoacceptors. IR spectroscopy was employed for the evaluation of energies of hydrogen bonds and equilibrium constants. © 1996 John Wiley & Sons, Inc.     

Chemical assays of end-groups displayed on the surface of poly(ethylene terephthalate) (PET) films and membranes by radiolabeling

Poly(ethylene terephthalate) (PET) films and track-etched microporous membranes naturally display, on their surfaces, reactive chain-ends, i.e. carboxyl and hydroxyl functions. These were assayed by suitable activation (reaction with carbodiimide and tosyl chloride, respectively), followed by coupling with ³H-lysine and liquid scintillation counting of the sample-associated radioactivity. Values ranging between 5 and 30 pmol/cm² (open surface) of labeled end-groups were obtained, depending on the physico-chemical nature of the samples. Basic hydrolysis enriched the PET films with both types of endings (15–25 pmol/cm²). Reduction of films with the NaBH₄-catechol complex in tetrahydrofuran enriched their surfaces with hydroxyl groups. However, this procedure was not readily applicable to the surface modification of membranes; we observed an erosion effect that was confirmed by scanning electron microscope analyses. In contrast with the reduction process, the oxidation with KMnO₄ in 1.2N H₂SO₄ could be easily applied to the modification of either films or membranes; their surfaces were significantly enriched with carboxyl groups (15–50 pmol/cm²). This surface modification strategy has been used for the covalent coupling of adhesive proteins on PET membranes developed as supports for cell cultivation.     

两性淀粉接枝共聚物在中性抄纸中的应用

为考察两性淀粉与丙烯酰胺接枝共聚及阳离子合成的具有功能化、网络化的多元变性淀粉对纸张的增强效果,采用废纸浆为原料,在中性抄纸条件下,对该多元变性淀粉的增强应用性能进行了研究。结果发现,两性淀粉与丙烯酰胺接枝共聚物(AS-g-PAM)及其阳离子化的衍生物(AS-g-CPAM)比两性淀粉具有更好的增强效果,尤其可大幅度提高纸张的环压强度。与两性淀粉比较,用量为0.5%AS-g-PAM和AS-g-CPAM可分别提高环压指数22%和45%以上,对纸张的抗张指数、耐破度等也比使用两性淀粉有不同程度的提高,同时,AS-g-CPAM在0.05%的低用量时,仍具有较好的增强效果。     

A Molecular-Wide and Electron Density-Based Approach in Exploring Chemical Reactivity and Explicit Dimethyl Sulfoxide (DMSO) Solvent Molecule Effects in the Proline Catalyzed Aldol Reaction

Modelling of the proline (1) catalyzed aldol reaction (with acetone 2) in the presence of an explicit molecule of dimethyl sulfoxide (DMSO) (3) has showed that 3 is a major player in the aldol reaction as it plays a double role. Through strong interactions with 1 and acetone 2, it leads to a significant increase of energy barriers at transition states (TS) for the lowest energy conformer 1a of proline. Just the opposite holds for the higher energy conformer 1b. Both the ‘inhibitor’ and ‘catalyst’ mode of activity of DMSO eliminates 1a as a catalyst at the very beginning of the process and promotes the chemical reactivity, hence catalytic ability of 1b. Modelling using a Molecular-Wide and Electron Density-based concept of Chemical Bonding (MOWED-CB) and the Reaction Energy Profile–Fragment Attributed Molecular System Energy Change (REP-FAMSEC) protocol has shown that, due to strong intermolecular interactions, the HN-C-COOH (of 1), CO (of 2), and SO (of 3) fragments drive a chemical change throughout the catalytic reaction. We strongly advocate exploring the pre-organization of molecules from initially formed complexes, through local minima to the best structures suited for a catalytic process. In this regard, a unique combination of MOWED-CB with REP-FAMSEC provides an invaluable insight on the potential success of a catalytic process, or reaction mechanism in general. The protocol reported herein is suitable for explaining classical reaction energy profiles computed for many synthetic processes.     

New Methacrylate Copolymers Based on the Benzofurane Ring: Synthesis,Characterization, Monomer Reactivity Ratios and Biological Activity

The free radical copolymerization of (5-bromo-1-Benzofuran-2-yl)(phenyl)-O-methacrylketoxime (BPMKO) with 2-(4-acetylphenoxy)-2-oxoethyl-2-methylacrylate(AOEMA) has been carried out in 1, 4-dioxane at 65°C ± 1 and was analyzed by Fourier transform infrared, ¹H-NMR, ¹³C-NMR and gel permeation chromatography. Elemental analysis was used to determine the molar fractions of BPMKO and AOEMA in the copolymers. The monomer–reactivity ratios were calculated according to the general copolymerization equation using Kelen-Tüdõs and Finemann-Ross linearization methods. The reactivity ratios indicated a tendency toward random copolymerization. The polydispersity indices of the polymers were determined by gel permeation chromatography and suggested a strong tendency for chain termination by disproportionation. The thermal behaviors of copolymers with various compositions were investigated by differential scanning calorimetry and thermogravimetric analysis. The glass-transition temperature of the copolymers increased with increasing BPMKO content in the copolymers. All the products showed moderate activity against different strains of bacteria and fungi.