槲寄生蛋白注射液细胞毒活性测定的MTT方法探讨

采用MTT比色法对体外培养的肿瘤细胞进行细胞毒作用实验，验证槲寄生蛋白注射液体外抗肿瘤效果．并且鉴定这种检测方法的有效性。实验结果表明槲寄生蛋白注射液有一定的体外抗肿瘤效果；MTT比色法是一种可用的体外细胞毒作用检测法，为新药品的开发提供了实验依据。     

Solid-phase oxidative halodecarboxylation of β-arylacrylic acids with the ceric ammonium nitrate—alkali halide system

The solid-phase oxidation of cinnamic, 4-methoxy- and 3,4-dimethoxycinnamic acids with Ce(NH₄)₂(NO₃)₆—MHal system leads to β-halostyrenes. Similar procedure in the absence of a metal halide results in a cleavage of the C=C bond giving the corresponding benzaldehydes. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 114–118, January, 2008.     

Postmodification of poly(9‐alkyl‐9H‐carbazole‐2,7‐diyl)s as a route to new main‐chain‐functionalized carbazole polymers

The postmodification of poly[9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P1 ) upon its reaction with N‐bromosuccinimide affords exclusive and full bromination of the 3,6‐positions of the carbazole repeat units to yield poly[3,6‐dibromo‐9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P2 ). Brominated polymer P2 can be used as a precursor for further functionalization at the 3,6‐positions with the desired functional group to afford other useful polymers. Polymer P2 has hence been reacted with copper(I) cyanide to afford poly[3,6‐dicyano‐9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P3 ). Full substitution of the bromide groups with nitrile‐functional groups has been achieved. The preparation and structural characterization of polymers P2 and P3 are presented together with studies on their electronic conjugation and photoluminescence properties. Cyclic voltammetry studies on polymer P3 indicate that the new polymer is easier to reduce (n‐dope) but more difficult to oxidize than its unsubstituted counterpart ( P1 ) as a result of the introduction of the electron‐withdrawing nitrile‐functional groups at the 3,6‐positions on the carbazole repeat units on the polymer chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3336–3342, 2006     

Atom transfer radical polymerization directly from poly(vinylidene fluoride): Surface and antifouling properties

The direct preparation of grafting polymer brushes from commercial poly (vinylidene fluoride) (PVDF) films with surface‐initiated atom transfer radical polymerization (ATRP) is demonstrated. The direct initiation of the secondary fluorinated site of PVDF facilitated grafting of the hydrophilic monomers from the PVDF surface. Homopolymer brushes of 2‐(N,N‐dimethylamino)ethyl methacrylate (DMAEMA) and poly (ethylene glycol) monomethacrylate (PEGMA) were prepared by ATRP from the PVDF surface. The chemical composition and surface topography of the graft‐functionalized PVDF surfaces were characterized by X‐ray photoelectron spectroscopy, attenuated total reflectance/Fourier transform infrared spectroscopy, and atomic force microscopy. A kinetic study revealed a linear increase in the graft concentration of poly[2‐(N,N‐dimethylamino)ethyl methacrylate] (PDMAEMA) and poly[poly(ethylene glycol) monomethacrylate] (PPEGMA) with the reaction time, indicating that the chain growth from the surface was consistent with a controlled or living process. The living chain ends were used as macroinitiators for the synthesis of diblock copolymer brushes. The water contact angles on PVDF films were reduced by the surface grafting of DMAEMA and PEGMA. Protein adsorption experiments revealed a substantial antifouling property of PPEGMA‐grafted PVDF films and PDMAEMA‐grafted PVDF films in comparison with the pristine PVDF surface. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3434–3443, 2006     

Koexistenzbeziehungen,Darstellung und Eigenschaften ternärer Phasen im System Cu/Mo/O

Coexistence Relations, Preparation and Properties of Ternary Compounds in the System Cu/Mo/O The phase diagram of the ternary system Cu/Mo/O is presented at 773 K. The compounds CuMoO₄, Cu₃Mo₂O₉, Cu₄Mo₅O₁₇, Cu₆Mo₅O₁₈, Cu_4–xMo₃O₁₂, and Cu_xMoO₃ are found to be thermodynamical stable. The homogeneity range of Cu_4–xMo₃O₁₂ runs to x = 0.1–0.2. Single crystals of CuMoO₄ and Cu₃Mo₂O₉ were grown by chemical transport reactions with TeCl₄, Cl₂, HCl, and Br₂ as transport agent. The results were compared with thermochemical calculations. The decomposition of CuMoO₄ and Cu₃Mo₂O₉ was investigated with thermal analysis and decompositon pressure measurements.     

Beiträge zur Chemie der Pyrrolpigmente, 70. Mitt.: Zum aktiven Transport mit tripyrrinoiden Liganden

The tripyrrin carboxylic acid6 exhibits a pronounced efficiency for carrier mediated proton driven secondary active transport (counter transport) for a series of toxic or valuable cations in a bulk chloroform membrane. In case of Zn⁺⁺ ions the mechanism including complete concentration profiles forNerst diffusion layers and bulk phase have been established. This compound might be used for detoxification or enrichment of precious metals using membrane separation systems.

Herrn Prof. Dr.A. Neckel mit den besten Wünschen zum 60. Geburtstag gewidmet.     

An Analytical Study of Molecular Transport in a Zeolite Crystallite Bed

Analytical solutions of the diffusion equations to obtain the diffusant concentrations in the macro- and micropores which constitute the pore system of a zeolite bed are presented. The parameter which determines the influence of each pore type on the evolution of the adsorbate/adsorbant system towards the equilibrium state is described. Examples are given to illustrate a qualitative and quantitative study based on the curves obtained from these equations.     

相转移催化元素硫的歧化反应

本工作将相转移催化(PTC)应用于元素硫歧化反应,大大降低了反应温度,提高了反应速度。该反应被证实与熔态硫在水溶液中的歧化相同,即4S+6OH~-=2S~(2-)+S_2O_3~(2-)+3H_2O。比较了四乙基铵、四丁基铵、十六烷基三甲基铵和三辛基甲基铵四种相转移催化剂及四氯乙烯、二甲苯和四氯乙烷三种溶剂的影响。讨论了本体系相转移催化的证据。为改进以元素硫歧化反应为基础的提取冶金过程提供了依据。     

Conduction and Transport Numbers in Metacomposites MeWO<Subscript>4</Subscript> ⋅ WO<Subscript>3</Subscript> (Me = Ca,Sr, Ba)

The conduction and transport numbers of charge carriers for composites in the systems MeWO₄-WO₃ (Me = Ca, Sr, Ba) are studied as a function of the temperature and the activity of oxygen in a gas phase. The transport numbers are determined by an emf method and are estimated from dependences of conductance on the activity of oxygen in a gas phase. The deficiencies of the given procedure as applied to investigation of properties of composite phases are analyzed. The materials under study are classified with a class of metacomposites. The concentration intervals of the ionic, mixed, and electronic conductions are determined. The conduction of composites of compositions (100 − x)MeWO₄ ⋅ xWO₃ is predominantly ionic at x ≤ 10 (Me = Ca), x ≤ 60 (Me = Sr), and x ≤ 45 (Me = Ba). The obtained data are explained in the framework of a model that represents a composite as a distributed matrix system where a film of surface phase MeW-s with a high mobility of oxygen ions plays the role of a connected matrix. It is presumed that the surface phase MeW-s possesses double-sided surface activity (α _MeW-s ≤ ) and a higher mobility with respect to MeWO₄ and WO₃. The discovered anomalies of dependences (T) and partial dependences , σ_el(T) are explained by a change in the stoichiometry, morphology, and the degree of connectedness of surface phase MeW-s caused by with a change in the temperature and composition of composites.__________Translated from Elektrokhimiya, Vol. 41, No. 6, 2005, pp. 680–693.Original Russian Text Copyright © 2005 by Neiman, Pestereva, Sharafutdinov, Kostikov.Published on the basis of a report delivered at the VII Meeting on Fundamental Problems in Solid-State Ionics (Chernogolovka-2004).     

Apparent molal volumes of aqueous solutions of bis-tetraalkylammonium salts at 25°C: Methylene-group contribution to the limiting molal volume

Densities of aqueous solutions of a series of polymethonium chloride and bromide salts (CH₃)₃–N–(CH₂)_n–N–(CH₃)₃X₂ have been measured at 25°C. Apparent molal volumes have been calculated, and methylene-group contributions to the limiting apparent molal volumes °_v have been estimated. Constant values of the methylene-group contribution of 16.5 and 17.0 cm³-mole^–1 were obtained for the bromide and chloride salts, respectively. These values are consistent with methylene-group contributions reported for other series of organic electrolytes.