Cyclotetrabenzoin: Facile Synthesis of a Shape‐Persistent Molecular Square and Its Assembly into Hydrogen‐Bonded Nanotubes

Cyanide‐catalyzed benzoin condensation of terephthaldehyde produces a cyclic tetramer, which we propose to name cyclotetrabenzoin. Cyclotetrabenzoin is a square‐shaped macrocycle ornamented with four α‐hydroxyketone functionalities pointing away from the central cavity, the dimensions of which are 6.9×6.9 Å. In the solid state, these functional groups extensively hydrogen bond, resulting in a microporous three‐dimensional organic framework with one‐dimensional nanotube channels. This material exhibits permanent—albeit low‐porosity, with a Langmuir surface area of 52 m² g^?1. Cyclotetrabenzoin’s easy and inexpensive synthesis and purification may inspire the creation of other shape‐persistent macrocycles and porous molecular crystals by benzoin condensation.     

ZnCr双金属层状材料对废水中酸性红14的吸附性能

采用共沉淀法制备性能优异的层状材料锌铬水滑石(Zn_xCr-LDHs, x=2, 3, 4), 并探究各种因素对吸附酸性红14(AR14)的影响。XRD、ICP、FTIR及BET表征结果表明:合成的Zn_xCr-LDHs晶型良好且稳定, 具备介孔结构。实验结果表明:最佳吸附剂为Zn₃Cr-LDHs, 比表面积为101 m²·g^-1, 对AR14的最大吸附容量为484.63 mg·g^-1。同时, 降低溶液pH值和提高溶液温度均可促进AR14的吸附。该吸附过程分别符合准二级动力学模型和Freundlich等温吸附模型。结合Materials Studio 5.5软件模拟, 推测该吸附机理主要以表面吸附为主, -SO₃^-基团是反应点。     

磁性聚苯乙烯-氯甲基苯乙烯材料的合成及其对蒽的吸附性能研究

采用4-氯甲基苯乙烯(VBC)为单体,二乙烯基苯为交联剂(DVB),以磁性γ-甲基丙烯酰氧基丙基三甲氧基硅烷(MPS)修饰硅胶微球为核,在偶氮二异丁腈(AIBN)引发下,以甲苯和聚乙二醇2000的混合溶液(质量比1∶2)为联合致孔剂,原位聚合制备了磁性聚苯乙烯-氯甲基苯乙烯材料(Fe3O4@Si O2@DVBVBC)。通过傅立叶红外光谱(FT-IR)、X-射线衍射(XRD)和氮气物理吸附对该材料的结构和组成特性进行了表征。以蒽为考察对象,对制备材料的吸附性能进行了考察,发现单体和交联剂的质量比对材料的吸附能力影响较大。当单体和交联剂的质量比为1∶4时,对蒽的吸附性能最佳。材料的孔结构会影响吸附平衡时间。制备的材料对蒽能够在30 min内达到吸附平衡且吸附率达95%。该材料对多环芳烃化合物的吸附主要依靠疏水作用。吸附动力学研究表明,材料对蒽的吸附性能对准一级动力学方程具有较好的拟合程度。采用2 mL乙腈涡旋15 min可将99%的蒽洗脱下来。     

Azido chelating fiber: synthesis,characterization and adsorption performances towards Hg2+ and Pb2+ from water

Herein, we report the synthesis and adsorption property of a novel chelating fiber containing azido group. Firstly, the brominated fiber (PP‐St‐DVB‐Br) was obtained via the reaction of polypropylene‐(g)‐styrene‐divinylbenzene fiber (PP‐St‐DVB) with bromine in CH₂Cl₂ solution. Then, azido chelating fiber (PP‐St‐DVB‐N₃) was prepared by azidation of PP‐St‐DVB‐Br fiber. Its structure and properties were characterized by Fourier transform infrared, elemental analysis, thermogravimetric analysis, and chemical titration, respectively. The micromophology and functional group distribution in fibrous matrix were investigated by scanning electron microscopy‐energy dispersive spectroscopy. The results show that the chelating fiber has high functional group contents (2.11 mmol/g for PP‐St‐DVB‐N₃) and uniform distribution. Different from granulate chelating resin, the novel fibrous adsorbent possesses excellent adsorption ability for Hg(II) and Pb(II) ions (408.9 mg/g for Hg²⁺ and 334.4 mg/g for Pb²⁺), and the adsorption capacity of the fiber has no loss until five cycles. The novel absorbent material shows the potential application prospect in the treatment of heavy metal wastewater. Copyright © 2017 John Wiley & Sons, Ltd.     

盾构渣土基碳复合陶粒的制备及除磷性能

以固体废弃物地铁盾构渣土、稻草秸秆和氧化镁为主要原料,通过烧结法制备了一种盾构渣土基碳复合陶粒。考察了陶粒吸附磷的主要影响因素及平衡吸附量,并采用模型对实验数据进行拟合分析。结果表明,当盾构渣土、稻草秸秆粉末和氧化镁质量比为7∶2∶1,在最佳烧结条件700℃烧结可得到除磷性能最佳的陶粒。当吸附pH=6.3时,陶粒具有较高的磷吸附性能。吸附在12 h内基本能达到吸附平衡,该过程适合准二级动力学方程。盾构渣土基碳复合陶粒对磷酸盐的吸附符合Temkin等温模型,随温度升高吸附量逐渐增大,40℃下最大吸附量为12.76 mg/g。热力学参数ΔH=5.64 k J/mol0,ΔS=8.00 J/(K·mol)0,ΔG=3.16 k J/mol0,呈吸热、非自发的热力学特征,陶粒吸附磷后可通过2.0 mol/L的氢氧化钠溶液重新解吸回收。     

含有二维十二核水簇的银配合物的合成及结构表征

以Hpda[3-(3-吡啶基)乙烯酸]为配体、AgNO_3为金属源,常温下合成了一个新颖的Ag配合物[Ag_2(pda)_2(H_2O)_3]n.通过往AgNO_3和Hpda的悬浊液中滴加氨水,室温下随着氨水的挥发澄清液中析出无色的晶体,所得产物经红外、XRD及热重表征.该分子中含有2个Ag中心,每个Ag中心通过pda配体及Ag—Ag键相连形成花生形状的一维链,该链进一步被Ag—Ag键连接形成双链结构.游离的水分子之间相互作用形成二维层状水簇,呈有趣的L4(4)12(8)形状.水分子与pda配体中的羧基氧通过氢键相互作用,将一维双链延伸成三维网络结构.     

带正电荷蛋白在纳米/微米草酸钙晶体上的吸附特性及其与带负电荷蛋白吸附的比较

研究尺寸分别为100 nm和3μm的一水草酸钙(COM)和二水草酸钙(COD)晶体对带正电荷的蛋白溶菌酶(LSZ)的吸附差异,并与带负电荷的蛋白牛血清白蛋白(BSA)的吸附进行了比较。LSZ在纳米/微米COM和COD晶体上的吸附都很好的拟合了Langmuir模型,属于单分子层吸附。纳米/微米COM和COD对LSZ的最大吸附量顺序为COD-100 nmCOM-100 nmCOD-3μmCOM-3μm;晶体的比表面积越大,曲率越小,晶体表面所带电荷越负,晶体结晶水越多,均导致LSZ吸附量越大。体系离子强度和p H值亦影响LSZ的吸附。随着Na Cl浓度增加,LSZ的吸附量减小,说明Na+离子能与带正电荷的蛋白LSZ竞争晶体表面的吸附位点,导致晶体表面吸附LSZ的位点减少。晶体对LSZ的最大吸附量都出现在LSZ的等电点附近(p H=10.7);在p H=5~8(生理条件)时,LSZ的吸附量随p H值的增大而增大。本文结果提示,通过减小尿液的p H值或者适当增大尿液的离子强度,可以减小LSZ在尿微晶上的吸附量,有可能达到抑制草酸钙结石的效果。     

Study of structural parameters on the adsorption selectivity of a molecularly imprinted polymer

This work was focused on the influence of match degree of structure parameters i.e. molecular size, volume and polarity (denoted as R_d, V_d and P_d) between imprinted cavities in Qu-MIP and Xn on the adsorption selectivity. The results presented that the influence of R_d on the adsorption selectivity was the largest and the most regular, while the influence of P_d was the smallest and the most irregular. Besides, the influence degree of V_d was decreased in general with the increase of R_d. However, as R_d was in the threshold of [0.99, 1.02], V_d would rise to the major influence factor. Furthermore, utilizing data obtained from experiment, the influence authority of R_d, V_d and P_d on the adsorption selectivity was calculated theoretically through multiple linear regression and principal component analysis of IBM SPSS Statistics 20, and results showed the authority order was R_d, V_d and P_d at any circumstance despite the value was different, which was in accordance with the result we directly inducted from the experiment.