Peculiarities of the effect of the electronic nature of substituents on the basic properties of aliphatic amines

Changes in the hybrid state of atomic orbitals of nitrogen and p-character of LEP, which occur under the effect of saturated hydrocarbon radicals and polar substituents in aliphatic amines, differ substantially. Therefore, the effect of the both substituents on the basicity constants of amines cannot be described by the single formal type of interaction. The anomalous changes in the basicity in the series of primary, secondary, and tertiary alkylamines, which are discussed in the literature, and the correlations pK _BH+ = f(*) and G _B = f(*) are, in fact, imaginary, because the alkyl radicals at the N atom do not manifest the electron-donor properties.     

An unequivocal synthesis of some substituted 1,2,4-triazolo[1,5-a]pyrimidines

An unequivocal synthesis of 5-chloro-7-methyl- (8) and 7-methyl-1,2,4-triazolo[1,5-a]pyrimidine (10) from 2-amino-4-chloro-6-methylpyrimidine (5) through the corresponding amidine6 and formamide oxime7 was developed. It was unambigously shown by comparison of the chemical shifts and the magnitude of coupling constants that the compounds obtained by condensation of 3-amino-1,2,4-triazole (12) and ethyl acetoacetate (13) and some further transformations are isomeric 5-methyl substituted 1,2,4-triazolo[1,5-a]pyrimidines1,9, and11.

---

Eine eindeutige Synthese einiger substituierter 1,2,4-Triazolo[1,5-a]pyrimidine

Zusammenfassung Es wurde ein eindeutiger Syntheseweg für 5-Chlor-7-methyl- (8) und 7-Methyl-1,2,4-triazolo[1,5-a]pyrimidin (10) ausgehend von 2-Amino-4-chlor-6-methylpyrimidin (5) über das entsprechende Amidin6 und das Formamidoxim7 entwickelt. Durch Vergleich von chemischen Verschiebungen und Kopplungskonstanten konnte eindeutig gezeigt werden, daß die Verbindungen, die bei der Kondensation von 3-Amino-1,2,4-triazol (12) and Ethylacetoacetat (13), sowie einige weitere Transformationsprodukte, isomere 5-Methylsubstituierte 1,2,4-Triazolo[1,5-a]pyrimidine sind (1,9,11).

     

Novel multiply hydrogen-bonded heterodimers based on heterocyclic ureas. Folding and stability

A new series of multiply hydrogen-bonded heterodimers have been self-assembled in chloroform-d, with ureidopyrimidone derivatives 2 and 3 and 2,7-diamino-1,6-naphthyridine diamide 4 and ureas 5 and 6 as monomers. The self-associating behavior of the compounds and the binding modules of the new heterodimers have been investigated. New tri-center hydrogen bonds have been proposed to explain the stability of the new heterodimers. 2D-NOESY, COSY and temperature variable ¹H NMR studies revealed that all the new heterodimers are substantially more stable than the ureidopyrimidone-based quadruply hydrogen-bonded homodimers in chloroform-d. As a result, heterodimers 2·4 and 3·4 were assembled quantitatively, while heterodimers 2·5, 3·5, 2·6, and 3·6 were formed in 80-85% yields. It is also revealed that intramolecular hydrogen bonds formed in monomers 5 and 6 reduce the stability of the corresponding heterodimers.     

X-ray and IR spectroscopic studies of specific intermolecular interactions inN′-substituted isonicotinohydrazides

_N-Thenylidene- andN-(o-nitrobenzylidene)hydrazides of isonicotinic acid have been studied by X-ray structural analysis and IR spectroscopy. In the crystalline state, these molecules are linked through intermolecular N—H ... Np_y hydrogen bonds. Carbonyl groups are not involved in intermolecular hydrogen bonds. However, it was found that the C=O group participates in an attractive interaction with the sulfur atom of the thiophene group. The energy of this interaction is comparable with the energies of intermolecular C=O ... H—N hydrogen bonds in amides.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 896–900, April, 1996.     

Molecular structures of β-amino-α-bromovinyl trifluoromethyl ketones

The molecular structures of β-amino-α-bromovinyl trifluoromethyl ketones was studied by UV, IR, ¹H, ¹³C, and ¹⁵N NMR spectroscopy and using the density functional (B3LYP/6-31G(d,p) and PBE/QZ3P) and ab initio riMP2/cc-pVTZm quantum-chemical calculations. Factors affecting stabilization of the EZE-conformation of the molecules, which is atypical of analogous unsubstituted amino enones, are considered.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 102–106, January, 2005.     

Interpretation of Strengthening Mechanism of Densified Wood from Supramolecular Structures

In this study, densified wood was prepared by hot pressing after partial lignin and hemicellulose were removed through alkaline solution cooking. The tensile strength and elastic modulus of densified wood were improved up to 398.5 MPa and 22.5 GPa as compared with the original wood, and the characterization of its supramolecular structures showed that the crystal plane spacing of the densified wood decreased, the crystallite size increased, and the maximum crystallinity (CI) of cellulose increased by 15.05%; outstandingly, the content of O(6)H⋯O(3′) intermolecular H-bonds increased by approximately one-fold at most. It was found that the intermolecular H-bond content was significantly positively correlated with the tensile strength and elastic modulus, and accordingly, their Pearson correlation coefficients were 0.952 (p < 0.01) and 0.822 (p < 0.05), respectively. This work provides a supramolecular explanation for the enhancement of tensile strength of densified wood.     

Pseudo-Binary Phase Diagram of LiNH2-MH (M = Na,K) Eutectic Mixture

The hunt for a cleaner energy carrier leads us to consider a source that produces no toxic byproducts. One of the targeted alternatives in this approach is hydrogen energy, which, unfortunately, suffers from a lack of efficient storage media. Solid-state hydrogen absorption systems, such as lithium amide (LiNH₂) systems, may store up to 6.5 weight percent hydrogen. However, the temperature of hydrogenation and dehydrogenation is too high for practical use. Various molar ratios of LiNH₂ with sodium hydride (NaH) and potassium hydride (KH) have been explored in this paper. The temperature of hydrogenation for LiNH₂ combined with KH and NaH was found to be substantially lower than the temperature of individual LiNH₂. This lower temperature operation of both LiNH₂-NaH and LiNH₂-KH systems was investigated in depth, and the eutectic melting phenomenon was observed. Systematic thermal studies of this amide-hydride system in different compositions were carried out, which enabled the plotting of a pseudo-binary phase diagram. The occurrence of eutectic interaction increased atomic mobility, which resulted in the kinetic modification followed by an increase in the reactivity of two materials. For these eutectic compositions, i.e., 0.15LiNH₂-0.85NaH and 0.25LiNH₂-0.75KH, the lowest melting temperature was found to be 307 °C and 235 °C, respectively. Morphological studies were used to investigate and present the detailed mechanism linked with this phenomenon.     

Unusual Reactivities of ortho-Hydroxy-β-nitrostyrene

Nitrostyrene derivatives are widely used in organic syntheses as a substrate for Michael addition, photoisomerization and cycloaddition. In contrast, ortho-hydroxy derivatives exhibit unusual behaviors in these reactions. Conjugate addition proceeded upon treatment of the ortho-hydroxy-β-nitrostyrene with an amine; however, subsequent C–C bond cleavage readily occurred to afford the corresponding imine. Moreover, conversion of the trans-isomer to a cis-isomer did not occur efficiently, even when UV light was irradiated. We studied these unusual behaviors of β-nitrostyrene, focusing on the role of the ortho-hydroxy group.     

Approach for the Direct Synthesis of β-Dichlorosubstituted Acetanilides Using Iodine Trichloride (ICl3) as the Oxidant and Catalyst

A reliable method for direct synthesis of β‐dichlorosubstituted acetanilides is reported. The key transformation involves the oxidative and catalytic cleavage of a carbon‐carbon bond in the presence of iodine trichloride (ICl₃). In this protocol ICl₃ is used not only as the catalyst but also as the oxidant which widely broadens the scope of its application in organic synthetic chemistry.