AB5型球形合金粉的表面处理研究

由雾化（Gas－atomization）技术制备的AB5型球形合金粉，作为镍氢电池负极材料具有很多优点：粉粒呈球状便于在多孔基片内装填；耐压耐磨性好；抗碱能力强且不易解胶．但它的电化学初活性差，难于活化．有碍电池中的应用．采用适宜的氧化剂（铜盐水溶液）处理，使球粒表面形成一个富铜、富镍亚层，显著地改善了合金粉的电化学活性．经处理的MlNi3.8CO0.5Mn0.3Al0.4球形合金粉，仅3次充放电循环其放电量便可达到240mA·h·g-1；而未经处理的同一合金粉即便经6次充放电循环其放电量也只有103mA·h·g-1．     

Na_（1－x）Zr（2－x）Nb_xP_3O_（12）系列化合物的水热晶化研究

采用水热晶化反应，制备出传统需要高温固相反应合成的掺杂ＮＡＳＩＣＯＮ化合物Ｎａ（１－ｘ）Ｚｒ（２－ｘ）ＮｂｘＰ３Ｏ１２（０＜ｘ＜１），并应用ＸＲＤ、ＩＲ方法对产物的晶体结构进行了研究，表明水热晶化产物是纯的物相并具有与ＮａＺｒ２Ｐ３Ｏ１２相同的结构．固体３１ＰＮＭＲ研究证实Ｎｂ（５＋）部分取代了Ｚｒ（４＋）所在位置，参与骨架的组成，并统计分布于结构中．水热晶化产物与固相反应产物具有相同的离子电导性能．     

Donor-acceptor properties, catalytic activity, and negative charge exoemission from the alumina surface modified with lithium cations

Donor-acceptor properties of alumina modified with lithium cations were studied by ESR of paramagnetic complexes of adsorbed anthraquinone. The results were compared with the data on negative ion emission (exoemission) accompanying the decomposition of isopropyl alcohol in the adsorption layer. The data on the activity measured by the pulse microcatalytic technique in isopropyl alcohol decomposition are discussed. Small additives of lithium were found to promote catalytic activity of the samples. The role of acid and basic sites in isopropyl alcohol decomposition was discussed. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 616–621, April, 2006.     

Synthesis and Structure of a Dinuclear Copper（Ⅱ）- ditetrazolate Involving in situ Ligand Synthesis

The hydrothermal reaction of 1,2-dicyanobenzene with NaN3 in the presence of CuCl2, 2,2′-bipyridine and H2O affords a novel dinuclear copper(II)-ditetrazolate, [Cu(bpy)- (pdtz)]2 (Hpdtz = 5,5′-1,2-phenylene-ditetrazole, bpy = 2,2′-bipyridine). The pdtz ligand is generated in situ through Sharpless 2 3 cycloaddition reaction. Its crystal structure was deter- mined by single-crystal X-ray diffraction method. The crystal crystallizes in the monoclinic system, space group P21/n with a = 8.2096(16), b = 18.580(4), c = 11.838(2) , β = 103.12(3)o, V = 1758.5(6) 3, Z = 2, Mr = 863.83, Dc = 1.631 g/cm3, F(000) = 876 and μ = 1.272 mm-1. In this novel dinuclear structure, the pdtz ligand adopts a peculiar μ2-η1,η2 coordination mode.     

高效液相色谱法所用大孔硅胶填料的制备

对国产ＧＹＱＧ球形硅胶施加高压水热处理并进行扩孔，制备了用于高效液相色谱法的大孔硅胶填料，考察了扩孔压力，扩孔温度和扩孔时间对平均孔径和比表面积的影响。并将产品日本ＳＩＬ－３００３×１０＾－８ｍ硅胶进行了物理性质和孔分布的对比实验，结果表明ＧＹＱＧ硅胶扩孔后平均孔径为２０～３０ｎｍ接近日本ＳＩＬ－３００３×１０＾－８ｍ硅前平平均孔径２５ｎｍ。display structure     

ESR study of products of transformation of 3,6-tert-butylpyrocatechol on alumina, zinca, silica, and titania

The formation of semiquinone and phenoxazyl radicals and metallocomplexes with semiquinone ligands was observed by ESR during the interaction of di-tert-butylpyrocatechol with Al₂O₃, ZnO, SiO₂, and TiO₂. In the case of different modifications of SiO₂, admixtures of TiO₂ exhibit a higher reactivity in complex formation with the organic substrate. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1975–1978, October, 1998.     

硼酸酯偶联剂的合成与表征

通过分子结构设计，合成了一种氮一硼内配位结构的硼酸酯偶联剂，解决了硼酸酯水解稳定性差的问题，同时分子结构中含有氨基、丁氧基等活性基团。用傅立叶变换红外光谱对硼酸酯进行了结构表征，讨论了原料配比、合成工艺等对硼酸酯收率及反应速率的影响，并通过实验确定了最佳配方及工艺。对硼酸酯的物理性能、溶解性、水解稳定性及对硼酸铝晶须的表面处理效果进行了表征。结果表明：合成的硼酸酯偶联剂由于具有氮-硼内配位作用，表现出优良的水解稳定性，并且硼酸酯偶联剂对硼酸铝晶须具有良好的表面改性效果。     

Vanadium Oxide: From Gels to Nanotubes

Vanadium oxide nanotubes (VO _x -NT) have been prepared by mixing hexadecylamine with V₂O₅·nH₂O gels. This procedure was followed by an hydrothermal treatment (150–180°C, 2–7 days) which leads to a large quantity of VO _x -NT. SEM and XRD analysis have been used to optimize the temperature and reaction time required for production of VO _x -Nt and morphology of the nanotubes investigated by TEM.     

笼形聚偕胺肟树脂的研究──酸处理树脂吸附H_2PdCl_4

考查了无机酸、羧酸和酚类化合物处理的笼形聚偕胺肟树脂吸附酸性溶液中H_2PdCl_4的能力，其中H_3BO_3/ACAO、HSCH_2CO_2H/ACAO和p－NH_2C_6H_4H/ACAO树脂对H_2PdCl_4的吸附容量分别是2．023、2．368和2．083mmol/g-R或215、252和222mgPd／g－R。优于相同条件下的碱处理树脂（BCAO吸附容量为1．828mmol/g-R）。研究了吸附动力学，讨论了吸附机理。     

催化裂化USY／ZnO／Al2O3脱硫添加剂的高温水热失活

 对USY／ZnO／Al2O3汽油催化裂化脱硫添加剂经高温水热老化处理前后的脱硫性能进行了考察，发现老化后添加剂的脱硫性能大幅度下降．采用XRD和IR等技术对USY／ZnO／Al2O3添加剂在高温和高温水热条件下失活的原因进行了研究．结果表明，在高温下，ZnO可与USY沸石中的铝发生固相反应生成ZnAl2O4尖晶石，从而造成USY晶体结构崩塌，转变成无定形状态．在ZnO含量较高的条件下，ZnO可继续与USY晶体结构崩塌后生成的无定形的硅和铝的氧化物反应，生成Zn2SiO4硅锌矿和ZnAl2O4尖晶石结构．这一方面使添加剂失去了可形成硫化物吸附中心的ZnO，另一方面破坏了硫化物的裂化活性组分USY，从而造成添加剂脱硫性能下降甚至失去脱硫活性．ZnO对USY的破坏作用主要与温度有关．在USY／ZnO／Al2O3体系中，ZnO被ZnO与Al2O3之间形成的锌铝尖晶石膜固定并与USY隔离，单纯的高温条件对添加剂的破坏不显著，而水蒸气可以促进ZnO的移动，有利于ZnO与USY的接触，因此在高温和有水蒸气存 在的条件下添加剂的结构易遭到破坏．