Diffusion study of multi-organic layers in OLEDs by ToF-SIMS

A model organic light-emitting diodes (OLEDs) with structure of tris(8-hydroxyquinoline) aluminum (Alq₃)/N,N′-diphenyl-N,N′-bis[1-naphthy-(1,1′-diphenyl)]-4,4′-diamine (NPB)/indium tin oxide (ITO)-coated glass was fabricated for diffusion study by ToF-SIMS. The results demonstrate that ToF-SIMS is capable of delineating the structure of multi-organic layers in OLEDs and providing specific molecular information to aid deciphering the diffusion phenomena. Upon heat treatment, the solidity or hardness of the device was reduced. Complicated chemical reaction might occur at the NPB/ITO interface and results in the formation of a buffer layer, which terminates the upper diffusion of ions from underlying ITO.     

Mesoporous nanotube aggregates obtained from hydrothermally treating TiO2 with NaOH

Nanotube aggregates with high porosity were prepared from hydrothermal treatment of TiO₂ particles in NaOH at 130 °C, followed by HCl rinsing to different pH values. Pore structure of the aggregates, which were mainly mesoporous, was characterized by analyzing the N₂ sorption isotherm with different methods including the t-plot and density function theory. The surface area, pore volume and mean pore size of the aggregates increased with the rinsing acidity to reach a maximum (e.g. 400 m²/g in surface area) at pH 1.6 and then decreased with further increase of the acidity. The crystalline phase and composition of the aggregates were, as well, significantly affected by the acidity of the post-treatment rinsing. Large-surface area aggregates were of loosely-attached nanotubes, composed of both anatase TiO₂ and H₂Ti₂O₅·H₂O, obtained under a mildly acidic rinsing condition, while basic or highly acidic conditions resulted in the formation of closely coagulated dense structures consisting of different crystalline phases.     

6-甲基-4-羟基-喹啉酸盐羟基钒(V)(英文)

V anadium髨coordination com pound1is achievedby the hydrotherm al reaction of V2O5and ethyl6-m ethyl-4-hydroxy-3-quinolinecarboxylate(em hq)w ithwater as solvent.X-ray single crystal diffraction studyof com pound1(Fig.1)shows that com pound1crystal-lizes …     

超临界co2中模板法制备氧化铝多孔材料

超临界co2;活性炭;模板;氧化铝;多孔     

Hydrothermal Synthesis and Crystal Structure of a Novel Isophthalate-bridged Copper(II) Polymer with Two-dimensional Network Structure: [Cu_2(phen)(ipt)_2]_(2n)·nH_2O (ipt = isophthalate, phen = 1,10-phenanthroline)

1 INTRODUCTION donor due to the presence of the protonated carboxyl group; (d) it can form short bridges via one car- Coordination polymers are of great interest due to boxylato end or long bridges via the benzene ring[7]. their physical properties and potential applications in We believe that coordination functionality of isoph- functional materials[1~3]. Aromatic polycarboxylic acids thalate can lead to interesting structures. In this com- such as 1,2,4,5-benzenetetracarboxylic acid[4],…     

氧化铝/碳纳米管复合材料的制备及表征

采用聚乙烯醇对碳纳米管表面进行改性，通过化学沉淀法将Al(OH)₃均匀沉积在碳纳米管表面，然后在氮气气氛下于500 ℃煅烧2 h，制备出氧化铝/碳纳米管复合材料。采用TEM、TG、DTA、XRD、IR、氮吸附脱附(比表面积及孔结构分析)等对氧化铝/碳纳米管复合材料进行表征，结果表明:未经聚乙烯醇改性的碳纳米管，氧化铝与碳纳米管相互分离;经聚乙烯醇改性的碳纳米管，氧化铝与碳纳米管结合良好。经聚乙烯醇改性的碳纳米管表面均匀覆盖一层聚乙烯醇膜，通过聚乙烯醇的吸附作用， Al(OH)₃沉积在碳纳米管表面形成一层连续的覆盖层。     

TiO2一维纳米材料及其纳米结构的合成

本文对合成TiO₂一维纳米材料及其有序纳米阵列的阳极氧化法、模板法以及水热法进行了全面而系统的评述，着重介绍了它们的最新研究进展。阳极氧化法能制备牢固负载于基体上的TiO₂纳米管阵列，这有助于构筑TiO₂纳米结构及其在纳米器件上的应用；与多种制备技术如溶胶－凝胶工艺、电化学沉积以及原子层沉积等相结合，模板法可以合成出多种形貌的TiO₂纳米材料如纳米管、纳米线和纳米棒，并可以通过改变所用模板的微观尺寸来调控TiO₂一维纳米材料及其有序阵列的微结构参数；水热合成法可以制备出直径小且比表面积大的TiO2纳米管粉末。但从目前看来，该法还不能制备出牢固负载于基体上的有序纳米阵列。文章最后指出了TiO₂一维纳米材料及其有序纳米阵列合成中存在的问题及今后发展方向。     

铕离子探针研究Al2O3的相变过程

氧化铝具有许多重要的工业用途，而制备高热稳定活性氧化铝的技术也在不断地发展[1，2]，因此，研究其高温烧结下的相变过程很有意义．离子深法作为新型测试手段，已成功地用于生物大分子结构与功能研究方面［‘］，而在固体材料测试中的应用尚未见报道．我们以EU’“作为荧光探针，并结合＊＊D和＊nR研究了川对。在不同烧结温度下的相变过程．1实验部分样品的制备采用复盐分解法．先将Elf刀s用高纯硝酸溶解定容．以占AlzO。重量1％的量加入到硫酸铝锭溶液中，进行超声处理，冷冻干燥．再依次登于900”C、1000C、1100C、1200C的高温炉…     

立方介孔相含钇氧化硅的合成与表征

以低浓度的十六烷基三甲基溴化铵为结构导向剂,在碱性条件下通过水热法合成了具有立方结构的含钇Y MCM 48介孔分子筛材料。XRD测试表明当Y/Si<0.05时可以获得典型的长程有序介孔立方结构相,随Y/Si比的增加,晶胞参数的增大和红外吸收光谱(FTIR)的变化为Y进入介孔分子筛骨架中提供了有力证据。N2吸附-脱附实验给出这种立方介孔材料的BET表面积为1180m2·g-1,BJH平均孔径为3.4nm。紫外 可见漫反射光谱(UV vis)证明钇以一种六配位的形式存在。X射线光电子能谱(XPS)进一步证明钇以三价形式存在于立方介孔分子筛骨架中。     

Hydrothermal Synthesis and Structure of a Copper(II) Complex, [Cu(4,4''''bpy)(H_2O)_3]SO_42H_2O

1 INTRODUCTION Recently, there has been increasing interest in crystal engineering of supramolecular architectures by means of covalent bonding, hydrogen bonding or other weak intermolecular interactions[1, 2], which reflect their potential applications in host-guest che- mistry, catalysis and function materials[3～5]. The construction of such materials is mainly provided by geometry of transition metal extending through rigid ligands. The oxidation state and coordination predisposition …