Synthesis and Crystal Structure of Mixed-Ligand Ni(II) Complex of N-(1-Phenyl-3-methyl-4-benzylidene-5-pyrazolone) p-Nitrobezoylhydrazide and Pyridine

A novel mixed-ligand nickel complex, [Ni(PMBP—PNH) (Py)₃], [PMBP—PNH=N-(1-phenyl-3-methyl-4-benzylidene-5-pyrazolone) p-nitrobezoylhydrazide; Py = pyridine], has been synthesized by the hydrothermal method and characterized by elemental analysis, IR spectrum, thermal analysis, and single-crystal X-ray diffraction. The X-ray diffraction reveals that the nickel (II) ion in the title complex is in a slightly distorted octahedral arrangement of the ONO donor atoms of primary ligand PMBP-PNH and three N-donor atoms in the secondary ligand pyridine.     

Model-free kinetics applied to regeneration of coked alumina

Thermogravimetry is proposed to study the alumina catalyst regeneration deactivated by coke, after being used in the transformation of styrene in a fixed bed continuous flow reactor. The model-free kinetic approach has been applied to data for the thermal oxidation of carbonaceous deposits on the catalyst. The activation energy (E) was calculated as a function of a (conversion) and T (temperature), by using Vyazovkin model-free kinetic method, allowing to estimate time required to remove coke at a given temperature. This revised version was published online in August 2006 with corrections to the Cover Date.     

Influence of Pore-expansion Agent on the Structure and Performance of Activated Alumina Synthesized from Waste Aluminum Sludge

1 INTRODUCTION The reactivity of activated alumina adsorbent is closely related to its specific surface area: the larger the specific surface area, the better its activity and adsorbent capability are. However, in reality, the prac- tically available specific surface area or effective spe- cific area has relationship with its pore structure[1]. Since many reactant molecules are difficult to enter the pores to react with whose radius is shorter than certain critical value, the increase of p…     

热处理对Co(Ni)-Mo/Al2O3催化剂加氢脱硫活性的影响

介绍了硫化Ｃｏ－Ｍｏ／Ａｌ２Ｏ３催化剂的热处理方法及其结果。实验表明，硫化催化剂经热处理后，加氢脱硫活性明显增加，以塞吩转化率表示的催化活性随处理温度升高而变化，在４５０℃时观察到催化活性的极大值。     

Gas Phase Catalysis by Metal Nanoparticles in Nanoporous Alumina Membranes

Nanoporous alumina membranes, loaded with palladium and ruthenium nanoparticles of various size, were used for gas phase hydrogenation of 1, 3‐butadiene and for oxidation of carbon monoxide, respectively. Those membranes contain 10⁹ ‐ 10¹¹ pores per cm², all running perpendicular to the surface. Membrane discs of 20 mm in diameter and only 60 μm thick, incorporated in a reactor in which the reactants can be pumped in a closed circuit through the pores, turned out to very actively catalyze hydrogenation of butadiene (Pd) and oxidation of CO (Ru). The activity of the Pd catalysts depends characteristically on the particles size, the gas flow, and of the educts ratio. As could be expected, larger particles are less active than smaller ones, whereas increasing gas flows in case of hydrogenation accelerates the reactions. Excessive hydrogen reduces selectivity with respect to the various butenes, but favours formation of butane.     

Interaction of long chain alkylammonium cations with reduced charge montmorillonite

Reduced charge montmorillonites (RCM) were prepared using lithium thermal treatment. The sorption of octylammonium (OA), dodecylammonium (DDA) and hexadecylammonium ions (HDA) on differently charged samples were studied. The amounts of DDA and HDA sorbed on each RCM exceed the cation exchange capacity (CEC) but that of OA exceeds only the CEC of samples with the lowest CEC. The sorption is affected not only by the layer charge but also by the formation of collapsed interlayer spaces in the lowest charged montmorillonites. X-ray measurements confirmed the decrease of the layer charge after lithium thermal treatment and the layer charge heterogeneity in RCMs.     

水热法制备高纯超细CeO2-ZrO2复合氧化物

Superfine composite powders of CeO₂-ZrO₂ (CZ) and CeO₂-ZrO₂-La₂O₃ (CZL) were prepared by hydrothermal method. The effects of pH、temperature and time for hydrothermal process on the performance of the resulting powders were studied. The optimized reaction parameters were on follows: the precursor′s pH≈9.0, hydrothermal temperature of 200 ℃ holding for 2 h. Thermal stable powders with average particle size smaller than 10 nm and specific surface area of 171 m²·g^-1 were obtained. A BET specific surface area was still at 44 m²·g^-1 after calcination at 1 000 ℃ for 6 hours.     

二维配位聚合物[Zn(PDC)(phen)]n的合成、晶体结构及荧光性质

合成了锌(II)与3,4-吡啶二羧酸和1,10-邻菲啰啉形成的配位聚合物[Zn(PDC)(phen)]_n (1) (H₂PDC＝3,4-吡啶二羧酸, phen＝1,10-邻菲啰啉), 对其进行了元素分析、红外光谱和X射线单晶衍射表征, 测定了晶体结构. 该聚合物属单斜晶系, P2(1)/n空间群, a＝0.77136 nm, b＝1.9757(4) nm, c＝1.0680(2) nm, β＝95.36(3)°, V＝1.6205(6) nm³, Z＝4, D_c＝1.683 Mg/m³, M_r＝410.68, F(000)＝832, μ＝1.55 mm^－1, 最终偏离因子R₁＝0.0608, wR₂＝0.0967. 该化合物中Zn原子与来自两个PDC的三个羧基氧原子, 另外一个PDC的吡啶氮原子, 以及phen的两个氮原子配位, 形成的ZnN₃O₃八面体通过PDC桥联形成二维层状网络结构. 此外还研究了该聚合物的热性质和荧光性质.     

十八元环多钒硼酸盐的水热合成及其氧化还原性质研究

在水热条件下合成了[Ni(en)2]6[(VO)12O6B18O39(OH)3].6H2O多钒硼酸盐,X射线衍射分析表明,该晶体属三方晶系,R-3空间群.测试了晶体的IR光谱和TG曲线,用循环伏安法详细研究了合成化合物的氧化还原性质及电子转移机理,结果表明该化合物具有两对氧化还原峰,其电子转移数分别为单电子和三电子.     

选相原位法合成立方氮化硼的关键影响因素

利用选相原位法在水溶液中成功制备出了立方氮化硼晶体，对反应条件进行了优化。结果表明，利用选相原位法合成立方氮化硼的最佳实验条件是：反应压力为10.0 MPa，在氯离子加入下利用混合氮源进行反应。在该条件下得到了纯相的立方氮化硼晶体。