Ag／Al2O3选择性催化丙烯还原氮氧化物表面反应机理的原位红外光谱研究

 在富氧条件下Ag／Al2O3对以丙烯为还原剂选择性催化还原NOx的反应有很高的催化活性．本实验成功地利用原位红外光谱分析手段,在真实的催化反应条件下,探讨了丙烯选择性还原NOx的反应机理,证实了催化剂表面反应中间体Al－NCO和Ag－NCO虽在真空中稳定,但在实际反应条件下极为活泼．催化剂表面上R－ONO和R－NO2分解成NCO是整个反应的速度控制步骤．这一结论与在真空系统条件下对其反应机理的研究结果一致,证明了在这一反应体系中两种研究方法的相关性．同时本实验还从反应机理上探讨了催化剂的水蒸气中毒现象．水蒸气的存在阻碍了催化剂表面R－ONO和R－NO2的生成,并进一步阻碍了反应的速度控 制步骤,即R－ONO和R－NO2向Al－NCO和Ag－NCO的转化,但这是一种完全可逆的暂时中毒现象．结合相应的催化剂活性评价结果对表面反应机理进行了讨论．     

非晶态NiP（B）／Al2O3催化一氧化碳，水和氧气合成过氧化氢

Hydrogenperoxideisagreenoxidantwithgreatpotentialformuchapplication .Thepresentproduc tionofhydrogen peroxiderequiressevereconditionsand generates pollutants .AlternativesynthesesarerequiredandthesynthesisofH2 O2 fromCO ,H2 OandO2 isverypromising .AsshowninEq(1) ,thesynthesisisthermodynamicallyfavored :CO +H2 O +O2 H2 O2 +CO2 (1)ΔG02 98=- 134kJ/mol　　ThereactionwasfirstreportedbyZudinetal[1]whousedpalladiumtriphenylphosphaneasacatalyst.Bianchietal[2 ] usedabiphasesystemforthesynthe …     

硅基多孔氧化铝模板非水电沉积CdS纳米线的研究

纳米材料,包括尺寸为纳米量级的超细微粒?线?薄膜?量子阱和超晶格等引起了人们广泛的重视 [1,2] ?其中 , 半导体纳米微粒和由其构成的纳米固体结构开辟了材料科学研究的新领域?硫化镉 (CdS) 作为一种重要的Ⅱ - Ⅵ族无机半导体材料 , 具有独特的光电性质 , 在光电化学电池和多相光催化反应中都有广泛应用?近年来 , 已有大量关于合成 CdS 纳米结构的文献报导 [3～12] , 所采用的方法如反胶束法?单分子膜法?自组装法以及电化学沉积法等 , 其中非水电解与模板技术相结合的制备方法引起了人们高度的重视并且被广泛的采用?自从 Baranski 等在上…     

Morphological and structural change of nano-pored alumina membrane above 1200 K

The transition and the change in pore morphology of a porous alumina membrane prepared by anodically oxidizing aluminum in sulfuric acid were studied mainly by TG-DTA, TMA, dilatometry and TEM. At ca. 1243 K, TMA showed an expansion followed by contraction; the CO₂ and SO₂ gases were quickly discharged, and the pore morphology of the as-prepared porous membrane (ca 150 mm-t, with pores ca 25 nm in diameter and containing ca 11% by mass of SO₂) showed an abrupt change, but the pores were retained to ca. 1573 K. Sulfur incorporated in the membrane was lost in two stages, i.e., at ca 1243 K and in a range up to 1373 K. Isothermal measurements revealed the complex crystallization of the amorphous phase into polycrystalline phase. This revised version was published online in August 2006 with corrections to the Cover Date.     

New hybrid chelating sorbents with grafted 3-aminopropionate groups based on mixed silicon,aluminum, titanium,or zirconium oxides

A series of new hybrid organo-inorganic sorbents with the 3-aminopropionate chelating group was synthesized. The synthesis includes the copolycondensation (sol—gel method) of tetraethoxysilane, 3-aminopropyltriethoxysilane, and several modifiers (MeSi(OEt)₃, EtSi(OEt)₃, Ti(OEt)₄, AlONO₃, ZrOCl₂) followed by carboxyethylation with acrylic acid. The obtained chelating sorbents were characterized by elemental analysis, FT-IR and ¹H NMR spectroscopy, and thermogravimetry. The N-carboxylated sorbents have a higher sorption capacity with respect to metal ions (0.5–0.9 mmol g⁻¹, pH 6.3, NH₄OAc, 20 °C) than the starting sorbents with the primary amino group (0.05–0.2 mmol g⁻¹) and manifest high selectivity for copper(II) ion extraction. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1783–1788, August, 2005.     

POROUS MEMBRANE TEMPLATED SYNTHESIS OF POLYMER PILLARED LAYER

The anodic porous alumina membranes with a definite pore diameter and aspect ratio were used as templates tosynthesize polymer pillared layer structures. The pillared polymer was produced in the template membrane pores, and thelayer on the template surfaces. Rigid cured epoxy resin, polystyrene and soft hydrogel were chosen to confirm themethodology. The pillars were in the form of either tubes or fibers, which were controlled by the alumina membrane pore surface wettability. The structural features were confirmed by scanning electron microscopy results.     

Preparation of nickel-mesoporous materials and their application to the hydrodechlorination of chlorinated organic compounds

Mesoporous materials have attracted considerable attention for use as a catalyst or a catalyst support due to their remarkable textural properties such as high surface area and large pore volume with a narrow pore size distribution. Many efforts have been made to design mesoporous materials for use in heterogeneous catalyst systems. Recent progress and results regarding the preparation of nickel-mesoporous materials and their application to the hydrodechlorination of chlorinated organic compounds were discussed in this review. Mesoporous materials were used as a support for nickel catalyst or a nickel-incorporated mesoporous catalytic material in this work. Two research areas were described and discussed in this review. One is the preparation of mesoporous alumina-supported nickel catalysts and their application to the hydrodechlorination of 1,2-dichloropropane and o-dichlorobenzene. The other is the preparation of mesoporous silica-supported nickel catalysts and their application to the hydrodechlorination of 1,1,2-trichloroethane and chlorobenzene.     

孔性氧化铝模板与一维纳米新材料的制备

纳米材料尤其是以碳纳米管有序阵列为代表的一维纳米阵列材料的重要价值,促进了人们对模板合成方法的研究。本文简要回顾和总结了近年来有关孔性氧化铝模板的制备及其应用的研究进展,结合我们实验室的部分相关研究工作,揭示了孔性氧化铝模板在合成与组装一维纳米新材料方面的重要作用,以进一步活跃和促进该重要领域的研究和发展。     

Determination of trace amounts of cadmium and copper by atomic absorption spectrometry after simultaneous extraction and preconcentration using a new water-soluble polyacrylic acid/alumina sorbent

An analytical method using alumina modified with water-soluble polyacrylic acid polymer for the simultaneous separation and preconcentration of trace Cu and Cd in a column system, and their determination by flame atomic absorption spectrometry was developed. The conditions for coating Al₂O₃ with polyacrylic acid were optimized, then the column was packed with 50 mg of this sorbent. Cd and Cu solution was passed through a glass column at pH 4.5, and elution was carried out with 5 mL of 0.05 M HCl at a flow rate of 1 mL min⁻¹. A sorption capacity of 10 mg Cu and 12 mg Cd was obtained for 1 g sorbent. The detection limit was calculated as 4.5 μg L⁻¹ for Cu and 1.54 μg L⁻¹ for Cd in the final solution. Enrichment factors of 300 for Cd and 400 for Cu were obtained.     

Hydrogen-induced metal-oxide interaction studied on noble metal model catalysts

Summary The effect of hydrogen reduction on the structure and catalytic properties of “thin film”and “inverse”model systems for supported metal catalysts is discussed. Thin film model catalysts were obtained by epitaxial growth of Pt and Rh nanoparticles on NaCl(001), which were coated with amorphous or crystalline supports of alumina, silica, titania, ceria and vanadia. Structural and morphological changes upon hydrogen reduction between 473 and 973 K were examined by high resolution electron microscopy. Metal-oxide interaction sets in at a specific reduction temperature and is characterized by an initial “wetting”stage, followed by alloy formation at increasing temperature, in the order VO_x< TiO_x< SiO₂< CeO_x< Al₂O₃. “Inverse”model systems were prepared by deposition of oxides on a metal substrate, e.g. VO_x/Rh and VO_x/Pd. Reduction of inverse systems at elevated temperature induces subsurface alloy formation. In contrast to common bimetallic surfaces, the stable subsurface alloys of V/Rh and V/Pd have a purely noble metal-terminated surface, with V positioned in near-surface layers. The uniform composition of the metallic surface layer excludes catalytic ensemble effects in favor of ligand effects. Activity and selectivity, e.g. for CO and CO₂methanation and for partial oxidation of ethene, are mainly controlled by the temperature of annealing or reduction. Reduction above 573 K turned out to be beneficial for the catalytic activity of the subsurface alloys, but not for the corresponding thin film systems which tend to deactivate viaparticle encapsulation.</o:p>