Reactions of Hydroxyazolidines with π-Donor Heterocycles. 3. Reaction of 1-Acetyl-5-hydroxypyrazolidines with Oxindoles

The reaction of oxindoles with 5-hydroxypyrazolidines on the surface of potassium fluoride-modified alumina leads to 3-(5-pyrazolidinyl)oxindoles. The structure of these products was studied.     

Chemical environment of copper at the surface of a CuAl2 model alloy: XPS,MEIS and TEM analyses

Air‐formed oxide on a CuAl₂ model alloy is shown to be free of copper species, with copper enriching in the alloy. With thickening of the oxide by anodizing, copper enriches further to a critical concentration at which its oxidation proceeds with incorporation of Cu(II) species into the film. Such species migrate more rapidly through the film than aluminium species. Incorporation of copper species is associated with generation of oxygen gas within the film and subsequent film rupture is due to release of the gas. Reduction of Cu(II) to Cu(I) species during XPS analysis is characterized and the accelerating role of charge neutralizing is highlighted. Copyright © 2004 John Wiley & Sons, Ltd.     

低温制备≥99.5%多晶氧化铝陶瓷

本文通过引入稀土氧化物Y2O3、Tm2O3为烧结助剂低温制备了氧化铝含量大于99.5;的多晶氧化铝陶瓷.实验表明:稀土氧化物的加入能够明显降低99.5;多晶氧化铝陶瓷的烧结温度,提高致密度.Y2O3、Tm2O3混合烧结助剂与单一稀土氧化物的烧结助剂相比能够明显抑制晶粒的生长,促进晶粒的均匀发育.当Y2O3+Tm2O3的含量为0.3;质量分数时,99.5;多晶氧化铝陶瓷的相对密度可达99.2;理论密度,抗弯强度为533MPa,显微硬度为17.2GPa.陶瓷断裂主要以穿晶断裂为主.     

Resonant ultrasound spectroscopy measurement of Young's modulus,shear modulus and Poisson's ratio as a function of porosity for alumina and hydroxyapatite

Modulus–porosity relationships are critical for engineered bone tissue scaffold materials such as hydroxyapatite (HA), where porosity is essential to biological function. Resonant ultrasound spectroscopy (RUS) measurements revealed that the Young's modulus, E, and shear modulus, G, of both alumina and HA decrease monotonically with increasing volume fraction porosity, P, for 0.06 < P < 0.39 (alumina) and 0.05 < P < 0.51 (HA). Although the elastic moduli of porous materials have been measured by a number of different ultrasonic resonance techniques (of which the RUS technique is one example) and over the last decade the elastic moduli of many solids have been measured by the RUS technique, this study is the first systematic RUS study of porous materials. Comparison of E versus P data for alumina (which has been studied extensively) with literature data from several measurement techniques indicates the RUS technique is effective for modulus–porosity measurements. Another key result is that although the HA specimens included in this study have a unimodal pore size distribution, the details of the decrease in E and G with increasing P agree well with literature data for HA with both unimodal and bimodal pore size distributions. In addition, Poisson's ratio exhibits a local minimum in the porosity range of 0.2 < P < 0.25 for both HA and alumina, which may be related to the pore morphology evolution during sintering.     

制备工艺对多孔阳极氧化铝特性的影响

通过对草酸溶液中制备的多孔阳极氧化铝(PAA)的形貌、晶态结构和光致发光(PL)特性的表征和机理分析,研究了草酸电解液浓度、阳极氧化电压和退火等丁艺对PAA的形成及特性的影响.PAA的孔径在50～120 nm之间,且随着阳极氧化电压的升高而增大,而受电解液浓度的影响较小.X射线衍射结果表明:PAA为非晶态结构,退火之后结晶,并有多相共存.PL测试表明PAA在375～500 nm之间有一较宽的蓝色发光带,发光峰在425 nm左右,是由氧空位引起的,且其峰强可通过改变阳极氧化电压和草酸浓度等参数来调制.     

形变多晶氧化铝纤维的荧光R谱线

使用自制拉伸装置和显微拉曼系统测定了形变下多晶氧化铝纤维的荧光R1和R2谱线,发现两条谱线均随纤维拉伸应变的增大而变宽,并获得了纤维应变与谱线宽化值之间的定量关系。从纤维的结晶晶格结构和形态学微结构定性地解释了谱线的宽化行为。也测定了谱线频率与多晶氧化铝纤维温度间的定量关系,频率温度系数值近似等同于单晶氧化铝的值。最后,研究了激发光偏振方向相对于纤维轴向的不同夹角对谱线频率的影响,并由此得出,氧化铝晶粒有相对纤维轴向取向的倾向。     

AD95陶瓷的层裂强度及冲击压缩损伤机理研究

采用激光位移干涉测试技术测量了AD95 陶瓷在一维应变冲击压缩下的自由面或样品/窗口界面粒子速度剖面, 确定了层裂强度及其与加载应力的变化关系, 在此基础上讨论了冲击压缩损伤程度与加载应力的关系. 研究结果表明: AD95陶瓷发生冲击压缩损伤的阈值应力约为3.7 GPa, 小于其雨贡纽弹性极限(HEL, 约5.47 GPa); 小于阈值应力不发生冲击压缩损伤, 层裂强度随加载应力的增加逐渐增大; 大于阈值应力冲击压缩损伤快速发展, 层裂强度迅速降低; 在HEL附近层裂强度降低到零, 丧失了抗拉能力, 表明材料发生了严重的冲击压缩损伤.     

多孔硅/多孔氧化铝与PVK复合光致发光特性

用旋涂法实现了多孔硅、多孔氧化铝与聚乙烯咔唑(PVK)的复合,研究了多孔硅／PVK、多孔氧化铝／PVK复合体系的光致发光性能。PL谱的测试发现,多孔硅／PVK复合体系的PL谱同时具有多孔硅和PVK的发射峰。此外,在485nm的位置出现了一个新峰,讨论了这个峰的来源。而多孔氧化铝与PVK复合后,没有产生新的峰。但多孔氧化铝与PVK复合后,由于多孔氧化铝纳米孔的纳米限制效应使PVK的发光峰出现大幅度蓝移。从多孔硅与多孔氧化铝发光机制的不同出发,讨论了多孔硅、多孔氧化铝与PVK复合后产生不同结果的原因。     

二次阳极氧化方法制备有序多孔氧化铝膜

通过二次阳极氧化方法制备多孔氧化铝膜与一次阳极氧化方法制备多孔氧化铝膜孔排布规律性的对比 ,结果发现 ,二次阳极氧化方法制取的多孔氧化铝膜孔排布规律性明显好于一次阳极氧化法制取的多孔膜 .在几个微米范围内 ,孔呈理想的六角排布 .去除一次阳极氧化膜后 ,二次阳极氧化得以在更良好的表面进行 ,制取的氧化铝膜孔规律性和有序度更高 .有序区域的尺寸与晶粒内的亚晶大小有一定关系     

Influence of aspect ratio and anisotropy distribution in ordered CoNi nanowire arrays

The size effects on magnetic properties of nanowires arrays were studied varying the nanowires diameter and maintaining the same periodicity among them, for two different nominal compositions of Co and Ni in the alloy form. The competition among magnetocrystalline and shape anisotropies changes drastically from smallest to biggest diameters altering the easy axis direction. In the case of 75% of Co in alloy, experimental values of the effective anisotropy constant (K_eff) vary from positive to negative depending on the diameter, which means a reversal of the easy axis direction. For 50% of Co the shape anisotropy dominates over the magnetocrystalline for all studied diameters.