Cu，Pd－ZSM－5上NO分解和CO氧化的催化作用

双交换Ｃｕ，ｐｄ－ＺＳＭ－５催化剂（Ｃｕ交换度为１０５％，Ｐｄ交换度分别为３．４％和３３％）对ＣＯ氧化反应有活性增强作用，对ＮＯ分解反应不存在增强效应．双交换催化剂在于交换程序不同，而表面物种不同，活性组分的分布状态不同，因而有不同的活性．先交换Ｃｕ，４００℃焙烧后再交换ｐｄ的Ｃｕ－Ｐｄ－ＺＳＭ－５催化剂，对上述两类反应的活性存双组分催化剂中均为最高．Ｈ_２－ＴＰＲ谱表明，共交换的Ｃｕ－Ｐｄ－ＺＳＭ－５中尚有部分ＣｕＣｌ＋占据了部分交换位置，而使ＣＯ氧化活性稍有下降．Ｎ_２－ＤＴＡ和Ｈ_２－ＴＰＲ谱结果表明，Ｐｄ交换到Ｃｕ－ＺＳＭ－５中后，抑制了吸附水和水合铜化合物的形成，由此提高了在２００—３００℃时氧的吸附量．后者的大小和ＣＯ氧化活性有顺变关系．Ｎ_２－ＤＴＡ谱中３４０—４４５℃的放热峰可能分别表征了和ＮＯ分解活性有关的铜氧桥或把氧桥的形成，该放热峰的峰温愈低，峰面积愈大，则ＮＯ分解活性愈高．     

钙钛矿型La_((1 x)/2)Sr_((1-x)/2)Co_(1-x)Cu_xO_3催化CO氧化活性与表征

研究了钙钛矿型LaSrCoCu_xO_3催化剂对CO氧化反应的催化活性及其表面氧的催化作用．结果表明，x＝0．4的催化剂对CO氧化具有最高催化活性，常压及本实验条件下CO完全氧化的最低温度为168℃；催化剂均为氧缺陷化合物，吸附于表面晶格氧缺陷上的吸附氧是CO氧化反应的活性氧物种；并发现催化剂中存在有非常价态的C04 ，认为CO氧化反应是通过吸附氧调变Co3 和Co4 价态而进行．     

Composition catalysts of ethylbenzene oxidation based on bis(acetylacetonato)nickel(ii) and phase transfer catalysts as ligands 1. Macrocyclic polyethers

The addition of the macrocyclic polyether 18-Crown-6 (18C6) increases the selectivity of oxidation of ethylbenzene to -phenylethylhydroperoxide (PEH) in the presence of Ni(acac)₂. The initial oxidation rate, selectivity and degree of conversion of ethylbenzene to PEH are greater than those catalyzed by Ni(acac)₂ only. The efficiency of the macrocyclic ligand as an activator of Ni(acac)₂ exceeds that of monodentate donor ligands. The high selectivity of the process is due to both the primary Ni(acac)₂ · 18C6 complexes and the products of their transformation in the course of oxidation. The mechanism of ethylbenzene oxidation catalyzed by Ni(acac)₂ · 18C6 complexes is discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1406–1411, August, 1994.     

2-Quinazolylguanidines in Heterocyclization Reactions. 2. Condensation with α,β-Unsaturated Carbonyl Compounds

4,6,6-Trimethyl-1,4-dihydropyrimidines have been synthesized by condensation of 2-quinazolylguanidines with mesityl oxide. The analogous reaction with benzalacetone leads to unstable 4-methyl-6-phenyl-1,4-dihydropyrimidines, which are oxidized to the corresponding 4-methyl-6-phenylpyrimidines.     

Hydrogen Oxidation on a Platinum Microelectrode: Effect of Carbon Monoxide Impurities

The kinetics of the hydrogen oxidation and the CO adsorption on a Pt (ultra)microelectrode is studied in a 0.5 M H₂SO₄ solution saturated with a mixture of gaseous H₂ and CO at partial CO pressures p _CO = 10–500 ppm. The balance between rates of diffusion and adsorption of CO at different adsorption times is studied. Studied is the effect of CO impurities in H₂ on steady-state polarization curves for the hydrogen ionization and nonsteady-state curves of the oxidation current decay with time at 0.02–0.05 V. Conditions under which in a certain time interval and at a certain CO concentration the slope of an I vs. t curve is proportional to p _CO are determined. The obtained dependence may be used when designing a technique for monitoring CO impurities in technical hydrogen.     

Oxidation of 2-dialkylaminomethyl-4,6-di-tert-butylphenols

Oxidative transformations of 2-dialkylaminomethyl-4,6-di-tert-butylphenols depend on the nature of the oxidant, the character of the substituents at the nitrogen atom, and the medium. A mechanism of the oxidation of these compounds is suggested. The molecular structure of the compound obtained as a result of oxidative trimerization of 2-dimethylaminomethyl-4,6-di-tert-butylphenol was established by X-ray structural analysis. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1328–1335, July, 1997.     

Ru/Mn-Ce/TiO2催化剂催化湿式氧化丁二酸的反应活性和动力学研究

在二氧化钛载体中通过掺杂Ru，Mn，Ce制备了一系列用于催化湿式氧化的催化剂，利用XRD，TEM，BET等手段对催化剂进行了表征．在反应温度T=210～270℃，氧分压Po2=2．1MPa条件下，在间歇式高压反应釜中对丁二酸进行了降解实验．催化剂在反应中有很高的催化活性．催化剂在30min内对丁二酸降解的COD去除率为54．4～98．3％．Ru及Mn，Ce的氧化物对催化活性都有促进作用．建立了丁二酸催化湿式氧化的一级分段动力学模型．基于COD的一段及二段反应的活化能分别为43．74kJ／mol和54．28kJ／mol．     

Oxidation of Heterocyclic Compounds by Permanganate Anion. (Review)

Data on the oxidative transformations of heterocyclic compounds with permanganate anion are reviewed     

DSC combined with chemiluminescence for studying polymer oxidation

The oxidation of (Ti,W)C ceramics have been studied as a part of the program to investigate of properties of powder materials. Thermogravimetry, derivative thermogravimetry (TG-DTG), and differential thermal analysis DSC have been used in the non-isothermal study of powder oxidation (Ti,W)C in dry air atmosphere. The powder of crystalline carbide cermets with a ratio of W:Ti equals 0.3 was used in this study. The diagrams were recorded on a sample mass 3.42 mg on the Setaram apparatus in temperatures ranging from 25 to 1000°C. Seven different heating rates were used. The analytical techniques SEM, WDX, EDX and XRD were used in the research. The kinetics of the oxidation process was followed by the integral method by applying the Coats-Redfern's approximation. The kinetic models of particular stages of (Ti,W)C oxidation were evaluated from the dynamic mass losses data. The values of apparent activation energy E and the pre-exponential factor A of each stage of the oxidation were calculated. This revised version was published online in July 2006 with corrections to the Cover Date.     

Chiral Recognition in π Complexes of Alkenes,Aldehydes, and Ketones with Transition Metal Lewis Acids; Development of a General Model for Enantioface Binding Selectivities

Prochiral alkenes, aldehydes, and ketones constitute the most frequently used starting materials for enantioselective organic syntheses. Protocols often involve chiral binding agents or Lewis acids that can give two diastereomeric adducts, the ratios of which are measures of chiral recognition. With π adducts, the diastereomers differ in the enantioface of the C?C or O?C group bound to the Lewis acid. This review provides the first comprehensive analysis of such equilibria and related binding phenomena with chiral transition metal Lewis acids. An extensive body of data from the authors' laboratory for complexes of the pyramidal rhenium fragment [(η⁵?C₅H₅)Re(No)(PPh₃)]⁺ ( I ) affords particular insight. Literature data for other complexes are also summarized. A general model for chiral recognition based upon the relative steric properties of four quadrants is presented. This enables binding selectivities to be individually and rationally optimized for different classes of ligands. Electronic effects are also identified and correlated with specific structural properties. Relationships between binding equilibria, reactivity, and product configurations are discussed.